First Step in HERMS Conversion...Thanks Yuri and all others - Home Brew Forums
Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > First Step in HERMS Conversion...Thanks Yuri and all others

Reply
 
Thread Tools
Old 08-09-2009, 01:25 AM   #1
maxbing
Recipes 
 
Nov 2008
Posts: 84
Liked 2 Times on 2 Posts



I just took the first step in upgrading to a HERMS System

I added a sight glass/Temp Prob port, electric heating element, and Heat exchanger coil to my HLT. Next comes digital Temp Controllers. Sorry for the poor Picture quality

Here I am just recirculating through the Coil back into the HTL to test for leaks…None yet



This is the Sight glass. The “T” on the end will be where the temp probe goes.



The is the Coil that is attached to the Cooler lid.


 
Reply With Quote
Old 08-09-2009, 12:41 PM   #2
The Pol
Recipes 
 
Feb 2007
Posts: 11,454
Liked 96 Times on 81 Posts


Looks nice, are you using QDs on this build?

 
Reply With Quote
Old 08-09-2009, 01:58 PM   #3
maxbing
Recipes 
 
Nov 2008
Posts: 84
Liked 2 Times on 2 Posts


Yes, i will be. But I did not order enough. Placing order with McMaster right now ;-)

By The Way Thanks for the Inspiration. This rig will look very familiar to you.


 
Reply With Quote
Old 08-09-2009, 02:28 PM   #4
The Pol
Recipes 
 
Feb 2007
Posts: 11,454
Liked 96 Times on 81 Posts


Quote:
Originally Posted by maxbing View Post
Yes, i will be. But I did not order enough. Placing order with McMaster right now ;-)

By The Way Thanks for the Inspiration. This rig will look very familiar to you.
Oddly familiar, yes.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
BLING BLING Electric HERMS Conversion The Pol Equipment/Sanitation 730 08-31-2013 08:44 AM
HERMS Step Mash Question? Douglefish Brew Stands 75 10-23-2009 07:37 PM
Step Mash Conversion Sixbillionethans Brew Science 0 08-25-2009 02:17 AM
how quickly should I step temperature with a HERMS stoutaholic Equipment/Sanitation 3 05-06-2009 02:30 AM


Forum Jump