Coldbreak Brewing HERMS Giveaway!

HomeBrewSupply AMCYL Brew Kettle Giveaway!


Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators and Keezers > Keezer build question.
Reply
 
Thread Tools
Old 08-06-2009, 08:30 PM   #1
Ajt012
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2009
Location: Miami
Posts: 19
Liked 1 Times on 1 Posts

Default Keezer build question.

I was wondering if anyone has done this, or is even feasible. But I was thinking of just removing the lid of a chest freezer completely, and replacing it with wood and staining it to make it look nice and all. Ofcourse i'd have to insulate the inside and what not.

any thoughts?


Ajt012 is offline
 
Reply With Quote
Old 08-06-2009, 11:41 PM   #2
hitbyatrain
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2009
Location: Round Rock, TX
Posts: 24
Default

I imagine it could be done, but it seems like it could be much more complicated than just framing out the freezer, since the door of the freezer has been specially designed and insulated for that unit.

If you haven't seen this project yet, take a look and see if you don't change your mind.


hitbyatrain is offline
 
Reply With Quote
Old 08-06-2009, 11:49 PM   #3
tipicreeper
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2008
Location: Arizona
Posts: 192
Liked 2 Times on 1 Posts

Default

+1
34567890
tipicreeper is offline
 
Reply With Quote
Old 08-07-2009, 02:00 AM   #4
Catt22
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2009
Posts: 5,000
Liked 63 Times on 59 Posts
Likes Given: 51

Default

I'm about to make a wooden top for my freezer. I plan to use 3/4" laminated "butcher Block" stuff sanded and finished with satin urethane. I'll just use construction adhesive to glue it to the top. The collar and taps were installed more than a year ago. The freezer is in my kitchen and I use the top as a kitchen work surface a lot of times. A wood top would be nice. I think I'd have to tighten up the spring tension in the hinge though to offset the additional weight of the wood.
Catt22 is offline
 
Reply With Quote
Old 08-07-2009, 09:49 AM   #5
ODP
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2009
Location: New Braunfels, Texas
Posts: 365
Liked 2 Times on 2 Posts

Default

some pics would be cool if you have some!
ODP is offline
 
Reply With Quote
Old 08-07-2009, 09:58 AM   #6
Amiaji
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2008
Location: Denver, NC
Posts: 292
Liked 5 Times on 4 Posts

Default

I made a top for mine. I insulated it with 2 layers of 3/4 inch blue Styrofoam. I just used the original hinges. It has worked quite well.





Check the link in my sig for more pictures.


__________________
A Keezer is Born

Beer is for drinking,
Homebrew is for sharing.
Amiaji is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
My Keezer build. Brewpatrol Kegerators and Keezers 13 02-14-2013 01:25 AM
Keezer build + pics + line question switched Kegerators and Keezers 7 11-03-2009 05:33 PM
My Keezer Build crabtre Kegerators and Keezers 7 06-15-2009 01:53 AM
Keezer Build Question RonRock Kegerators and Keezers 10 01-12-2009 01:21 AM
Starting my keezer build tomorrow, a collar question Chello Bottling/Kegging 3 12-29-2007 03:27 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS