Coldbreak Brewing Giveaway - Open to All!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Difference between Weld-B-Gone and Kewler Kitz?
Reply
 
Thread Tools
Old 08-01-2009, 02:52 PM   #1
Octavius
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2009
Posts: 248
Liked 3 Times on 3 Posts
Likes Given: 25

Default Difference between Weld-B-Gone and Kewler Kitz?

We ordered a Weld-B-Gone but I think they sent us a Kewler Kitz.

The kit has 2 O-rings, one about twice as thick as the other. More importantly, the male nipple (whoa!) - the outside threaded cylinder - is not threaded all the way. I'm thinking the Weld-B-Gone has it threaded all the way.

We could not get the valve to tighten in the keggle hole without using the thin O-ring on the inside. The connection does not leak but it is not tight and I'm a bit worried.

If I have this right then we could just order a threaded nipple from morebeer.com for a coupla bucks.

Cheers!


Octavius is offline
 
Reply With Quote
Old 08-01-2009, 04:16 PM   #2
Scut_Monkey
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2009
Location: Pittsburgh, Pennsylvania
Posts: 2,685
Liked 13 Times on 13 Posts

Default

It sounds like the nipple is just too long to me. Sounds like this is what you think too. I would think your idea of buying a new nipple would work. Besides you can never have too many nipples.... female nipples that is.


Scut_Monkey is offline
 
Reply With Quote
Old 08-01-2009, 05:19 PM   #3
Catt22
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2009
Posts: 5,000
Liked 62 Times on 59 Posts
Likes Given: 51

Default

The easiest solution would be to use a washer or two on the outside to take up the slack. The problem is that SS or brass washers that large are hard to find.

"male nipple" is redundant. All pipe nipples are males and all pipe couplings are females. I know this because I used to breed them! You can check with the Department of Redundancy Department if you don't believe me.
Catt22 is offline
 
Reply With Quote
Old 08-01-2009, 05:48 PM   #4
Scut_Monkey
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2009
Location: Pittsburgh, Pennsylvania
Posts: 2,685
Liked 13 Times on 13 Posts

Default

I guess a male nipple is redundant but it does make you wonder why a coupling isn't called a female nipple. How I wish it was!

I know Austinhomebrew.com sells both different sized nipples and they do sell SS washers that fit over nipples. I know this cause I was driving myself crazy trying to find one.
Scut_Monkey is offline
 
Reply With Quote
Old 08-03-2009, 05:00 PM   #5
Octavius
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2009
Posts: 248
Liked 3 Times on 3 Posts
Likes Given: 25

Default

Thanks for the posts.
I'll just get a washer or nipple next time I order.

Cheers!


Octavius is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Installing Kewler Kitz. bearymore Equipment/Sanitation 6 05-05-2008 06:11 PM
Kewler Kitz Leak Rate? chemist308 All Grain & Partial Mash Brewing 9 03-23-2008 11:23 PM
Kewler Kitz Thermothingy... greg75 Equipment/Sanitation 5 01-07-2007 08:45 PM
Kewler Kitz Thermothingy... greg75 All Grain & Partial Mash Brewing 2 01-07-2007 05:18 PM
For those with Kewler Kitz XL bulkhead fitting... greg75 Equipment/Sanitation 4 12-20-2006 01:46 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS