Efficiency Problems - Home Brew Forums
Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > Efficiency Problems

Reply
 
Thread Tools
Old 07-31-2009, 01:47 PM   #1
uabericm
Recipes 
 
May 2009
Bham
Posts: 91
Liked 1 Times on 1 Posts



Brewed the PM version of Lil Sparky's Nut Brown ale the other night and it looked, smelled, and tasted awesome.
Grain Bill:
5 lbs 3.8 oz Pale Liquid Extract (8.0 SRM)
2 lbs Pale Malt (2 Row) US (2.0 SRM)
13.2 oz Caramel/Crystal Malt - 60L (60.0 SRM)
14.2 oz Oats, Flaked (1.0 SRM)
6.6 oz Victory Malt (25.0 SRM)
3.3 oz Chocolate Malt (350.0 SRM)

One question though, what would be some reasons for a low efficiency?

Method: DB Easy Partial Mashing
Strike: 168
Mashed around 152 for 60 minutes.
Sparged for 10 minutes at 160.
LME added at 15 minutes left in boil (to increase IBUs).

According to Beer Smith, OG was supposed to be 1.059 and we only hit 1.054, giving us an efficiency of 59% (suck).

Thoughts?


__________________
Quote:
Originally Posted by Laughing_Gnome_Invisible View Post
The yeast is just laying back and having a cigarette after a short rabbit-style shag. Let them cuddle for a week before you do anything at all.
Keg Carbonation Calc Pitching Rate Calc HBT Starter Calc

 
Reply With Quote
Old 07-31-2009, 01:54 PM   #2
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 23,150
Liked 1622 Times on 1050 Posts


The crush is the most obvious culprit without knowing anything else. Who crushed the grain? Did you notice any full, intact kernels?


__________________
Welcome to BrewHardware.com. I love you.
BIAB Large Mesh False Bottoms and SS HERMS COILS are IN!!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

 
Reply With Quote
Old 07-31-2009, 02:01 PM   #3
uabericm
Recipes 
 
May 2009
Bham
Posts: 91
Liked 1 Times on 1 Posts


I did not notice any intact kernels. I bought the ingredients from AHS.

What else would you need to know to give other ideas?
__________________
Quote:
Originally Posted by Laughing_Gnome_Invisible View Post
The yeast is just laying back and having a cigarette after a short rabbit-style shag. Let them cuddle for a week before you do anything at all.
Keg Carbonation Calc Pitching Rate Calc HBT Starter Calc

 
Reply With Quote
Old 07-31-2009, 02:04 PM   #4
Donner
Recipes 
 
Feb 2008
Oxford, MS
Posts: 823
Liked 2 Times on 2 Posts


Before you said you'd start this thread on this issue, i was going to suggest what Bobby_M said. The crush could be one big problem.

Also, it could be that you are not accurately measuring your water volumes. If you have too much water then you might have extracted more sugar, but diluted it before measuring the gravity. There is another thread in this section on efficiency and PM, it might have some insight, as well.
__________________
DonFeitel.com

 
Reply With Quote
Old 07-31-2009, 02:06 PM   #5
phatuna
Recipes 
 
Mar 2009
San Diego
Posts: 794
Liked 5 Times on 5 Posts


Are you topping up with water in your primary? or full boil?

If you are topping up, perhaps you took a reading before properly mixing the wort?

 
Reply With Quote
Old 07-31-2009, 02:12 PM   #6
wscott823
Recipes 
 
May 2009
Baltimore, Maryland
Posts: 484
Liked 7 Times on 6 Posts


I had the same problem when I made the same brew as my 2nd AG. Good crush is important, as already mentioned. Personally I rushed my sparge time. My last AG batch of OktoberFAST I brewed, I slowed down the sparge to run for over 45 minutes, boosted my efficiency by +10%
__________________
Primary: Nada
Lagering/Secondary: Nada
Micro Barrel Aging: H2O & Metabisulfite
Bottled: Sparkling Ambrosia, Chai Graff, Cerberus Barleywine, Jamil's Evil Twin, Chinook IPA
Planned Brews: Devil's Serum (Golden Strong Ale)

Make Your Own Belgian Candi Syrup

 
Reply With Quote
Old 07-31-2009, 05:09 PM   #7
uabericm
Recipes 
 
May 2009
Bham
Posts: 91
Liked 1 Times on 1 Posts


Quote:
Originally Posted by phatuna View Post
Are you topping up with water in your primary? or full boil?

If you are topping up, perhaps you took a reading before properly mixing the wort?
I am topping it off with water in the primary. We took a reading before mixing a few batches ago and quickly realized our mistake; however, it was before the yeast was added and the lid was snapped.

We made sure this time to stir and we usually use the siphon to pull a sample.
__________________
Quote:
Originally Posted by Laughing_Gnome_Invisible View Post
The yeast is just laying back and having a cigarette after a short rabbit-style shag. Let them cuddle for a week before you do anything at all.
Keg Carbonation Calc Pitching Rate Calc HBT Starter Calc

 
Reply With Quote
Old 07-31-2009, 05:10 PM   #8
uabericm
Recipes 
 
May 2009
Bham
Posts: 91
Liked 1 Times on 1 Posts


Quote:
Originally Posted by wscott823 View Post
I had the same problem when I made the same brew as my 2nd AG. Good crush is important, as already mentioned. Personally I rushed my sparge time. My last AG batch of OktoberFAST I brewed, I slowed down the sparge to run for over 45 minutes, boosted my efficiency by +10%
Good idea. Maybe I need to allow it to sparge a little longer. I'm not looking for a great efficiency, just somewhere closer to 70%.
__________________
Quote:
Originally Posted by Laughing_Gnome_Invisible View Post
The yeast is just laying back and having a cigarette after a short rabbit-style shag. Let them cuddle for a week before you do anything at all.
Keg Carbonation Calc Pitching Rate Calc HBT Starter Calc

 
Reply With Quote
Old 07-31-2009, 05:11 PM   #9
uabericm
Recipes 
 
May 2009
Bham
Posts: 91
Liked 1 Times on 1 Posts


Quote:
Originally Posted by Donner View Post
Before you said you'd start this thread on this issue, i was going to suggest what Bobby_M said. The crush could be one big problem.

Also, it could be that you are not accurately measuring your water volumes. If you have too much water then you might have extracted more sugar, but diluted it before measuring the gravity. There is another thread in this section on efficiency and PM, it might have some insight, as well.
Thanks. I will try to find the other thread.


__________________
Quote:
Originally Posted by Laughing_Gnome_Invisible View Post
The yeast is just laying back and having a cigarette after a short rabbit-style shag. Let them cuddle for a week before you do anything at all.
Keg Carbonation Calc Pitching Rate Calc HBT Starter Calc

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Regulator problems? Or Judo problems? Judochop Bottling/Kegging 11 05-13-2015 03:14 PM
consistency/efficiency problems mkultra69 General Techniques 4 07-29-2008 02:18 AM
Partial Mash/AG Efficiency Problems efreem01 All Grain & Partial Mash Brewing 5 10-04-2007 04:18 PM
Chillzilla Efficiency Problems DirtyMick Equipment/Sanitation 5 08-28-2007 07:17 PM
Low efficiency problems. Big Al All Grain & Partial Mash Brewing 18 05-20-2007 01:58 PM


Forum Jump