Mounting jet burners - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > Mounting jet burners

Thread Tools
Old 07-30-2009, 03:54 PM   #1
Nov 2008
Walnut Creek, CA
Posts: 199
Liked 3 Times on 3 Posts

I'm in the process of building a replica of Scuba Steve's wood rig and I'm to the point of purchasing and mounting the burners. Originally I was going to go with banjo type burners as they have the pre-drilled holes around the circumference for easy mounting. I then decided to go with propane impinged jet type burners (as it adds to the bad ass look) but am noticing they don't have any holes to mount them. Any ideas as to how I can mount them to the angle iron cross pieces? Any thoughts on pros/cons to the jet burners over the banjo type?

Reply With Quote
Old 07-30-2009, 03:56 PM   #2
Cape Brewing
DOH!!! Stupid brewing...
Cape Brewing's Avatar
May 2008
Norton, MA
Posts: 13,498
Liked 883 Times on 697 Posts

Read through this... there's all sorts of good debate and info on them.
Why the eff not... everyone else is starting a nano!!! I wanna!!!

Originally Posted by paulthenurse View Post
I'm pretty much a douche in real life, too.

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Mounting magnets ClaudiusB Chillers & Stir Plates 2 04-17-2009 04:15 AM
mounting a hopper thevalkrye Equipment/Sanitation 2 04-02-2008 07:15 PM
Permanently mounting IC CodeRage Equipment/Sanitation 7 02-25-2008 08:11 PM
mounting co2 manifold...?? Jester Bottling/Kegging 5 04-11-2006 06:08 PM
Burners, burners and more burners.... Yikes! Lounge Lizard Equipment/Sanitation 16 12-31-2005 02:09 AM

Forum Jump