Keg not holding pressure, or so it seems - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Keg not holding pressure, or so it seems

Reply
 
Thread Tools
Old 07-23-2009, 07:51 PM   #1
petep1980
HBT_LIFETIMESUPPORTER.png
 
petep1980's Avatar
Recipes 
 
Nov 2008
Posts: 1,905
Liked 15 Times on 15 Posts



I set the regulator on 17psi when I left the house. I came back and it's now on 15psi. Can someone explain this? I don't know a ton about kegging so any help would be great.

 
Reply With Quote
Old 07-23-2009, 08:30 PM   #2

Check all your seals. You can expect some drop in pressure, but not that sudden. Mix up a solution of water and dishsoap. Spread it on all your seams. Crank up the CO2 and if you see bubbles, you've got a leak.

Check your pins, your regulator, all of the hose connections, around the lid of the keg, etc.

My main problem was always the CO2 gauge. I had a really hard time getting it tightly fit into the tank. Put a little plumbers tape on it and cranked on it with a wrench real good.....problem solved.
__________________
He who drinks beer sleeps well. He who sleeps well cannot sin. He who does not sin goes to heaven.

Another HERMS rig...

 
Reply With Quote
Old 07-23-2009, 08:35 PM   #3
Munsoned
 
Munsoned's Avatar
Recipes 
 
Mar 2009
DC Metro
Posts: 642
Liked 1 Times on 1 Posts


People also dunk their lines, hoses, even regulators under water. YMMV (and I personally won't put my regulator under water), but if it's bubbling up anywhere--easy to spot the leak.
__________________
___________________________
“While the rest of the species is descended from apes, redheads are descended from cats.” - Mark Twain

 
Reply With Quote
Old 07-23-2009, 08:49 PM   #4
jett78
Recipes 
 
Feb 2009
Colton, CA
Posts: 69
Liked 1 Times on 1 Posts


grab a spray bottle with sanitized water and spray around possible leak points
__________________
I'm not as think as you drunk I am.

 
Reply With Quote
Old 07-23-2009, 09:13 PM   #5
BrothersBrewing
 
BrothersBrewing's Avatar
Recipes 
 
May 2009
concord,NH
Posts: 157

yah...what they said

 
Reply With Quote
Old 07-24-2009, 12:42 AM   #6
petep1980
HBT_LIFETIMESUPPORTER.png
 
petep1980's Avatar
Recipes 
 
Nov 2008
Posts: 1,905
Liked 15 Times on 15 Posts


Ugh, I simply cannot find a leak....Argh!!

 
Reply With Quote
Old 07-24-2009, 12:51 AM   #7
beerthirty
big beers turn my gears
HBT_LIFETIMESUPPORTER.png
 
beerthirty's Avatar
Recipes 
 
May 2008
Podunk, VA. Not far from the NC line.
Posts: 2,589
Liked 32 Times on 14 Posts


If you have the regulator set at a certain pressure and the gauge drops after a while then you have several possibles.
1. out of gas, regulators maintain pressure with adequate gas flow.
2. poor quality gauge, (most likely problem) Even though the gauge will read in 1 lb increments, slow drops or rises are not recorded very well.
3. poor regulator, cant maintain a precise pressure resulting in readings that are a few lbs off.
4. any combination of the above.
Since a regulator is designed to maintain a set pressure, a leak will not cause a lack of pressure until the tank is empty and cant deliver the required pressure.
A couple lbs is not that much to worry about. It happens to me but after a couple days of fine tuning the pressure it normally stabilizes. RDWHAHB
__________________
Quote:
Originally Posted by the_bird View Post
"I've got a fever... and the only prescription is, MORE CARBOYS!"
primary- Tangerine Dream, SWMBO slayer,
serving- amber ale hop experiment #6, Roggenbier, apfelwine
planning- Cru?
conditioning- 9/9/09 barleywine
Drink water?... Never, fish fornicate in it.--- W.C. Fields
Most problems can be solved with the proper application of force.

 
Reply With Quote
Old 07-24-2009, 01:51 AM   #8
petep1980
HBT_LIFETIMESUPPORTER.png
 
petep1980's Avatar
Recipes 
 
Nov 2008
Posts: 1,905
Liked 15 Times on 15 Posts


Well I check for leaks, and unless it's in the thing that connects to the keg, then I'm lost. I'll set it at 17 tonight and I'll let you know where I stand come morning.

I just don't want a leak and find an empty tank. If there was a leak though I would probably hear the tank supplying co2 for it though wouldn't it?

 
Reply With Quote
Old 07-24-2009, 01:55 AM   #9
Parva
Recipes 
 
Jul 2008
Leeds, UK
Posts: 126

Hang on, did you set the pressure and then turn the gas off? C02 disolves into the beer and the pressure will drop over time if this is the case.

 
Reply With Quote
Old 07-24-2009, 01:57 AM   #10
petep1980
HBT_LIFETIMESUPPORTER.png
 
petep1980's Avatar
Recipes 
 
Nov 2008
Posts: 1,905
Liked 15 Times on 15 Posts


I kept gas on. Beerthirty is prob right about the inaccurate gauges. I do feel though as if my previous tank emptied pre-maturely though.

If beer was soaking in CO2 wouldn't the pressure then drop if gas was on or off?


 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Corney Keg not holding pressure, how do I test? Dukester Bottling/Kegging 2 06-05-2009 04:06 AM
Keg not holding pressure over time aekdbbop Bottling/Kegging 10 01-13-2009 07:47 PM
For those who don't like holding their hose EdWort DIY Projects 18 06-30-2008 03:14 PM
losing co2 but holding pressure neo82087 Bottling/Kegging 3 01-08-2008 02:58 AM
Holding Carbonation Alamo_Beer Cider Forum 0 02-10-2007 04:50 AM


Forum Jump