Sanke Fermenter Conversion - Page 12 - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Sanke Fermenter Conversion

Reply
 
Thread Tools
Old 01-21-2010, 07:15 PM   #111
caspio
 
caspio's Avatar
Recipes 
 
Jun 2008
Chico, CA
Posts: 281
Liked 4 Times on 4 Posts


It's a pretty simple setup - just a pond pump and some PVC. I cross posted to HBT so people don't need to register for our dinky little forum. (although just the folks clicking through from this thread would probably quadruple our normal daily visitor count)

 
Reply With Quote
Old 01-21-2010, 07:24 PM   #112
mmb
Jazz Hands!
HBT_LIFETIMESUPPORTER.png
 
mmb's Avatar
Recipes 
 
Feb 2008
WBMI
Posts: 30,306
Liked 4057 Times on 3807 Posts


If you used a reducer at the top and then a nozzle you might get a little more pressure from the system.

Very nice. Going to have to do something of the sort to place in the brewery tub sink.
__________________
Black Phantom Brewing Company

 
Reply With Quote
Old 01-21-2010, 07:32 PM   #113
caspio
 
caspio's Avatar
Recipes 
 
Jun 2008
Chico, CA
Posts: 281
Liked 4 Times on 4 Posts


I thought about looking at pond sprayer parts and finding some sort of cool nozzle, but I decided not to. The biggest reason was pressure - most of the guides I found were people using powerful sump pumps with twice the output of my little pond pump. I wasn't sure if I'd get adequate coverage.

The other thing is ease of cleaning - I can pop the top off and rinse it out with no problem, and if it ever gets too crusty a replacement is only 50 cents. Some spray nozzles looked like they might be hard to unclog. Really though, do whatever works best for your setup.

 
Reply With Quote
Old 01-24-2010, 08:53 PM   #114
bhatchable
 
bhatchable's Avatar
Recipes 
 
Aug 2009
San Diego
Posts: 390
Liked 1 Times on 1 Posts


So Derrin, would this nifty contraption work for a 30L "S" type sanke keg that I have?
__________________
Nunc Est Bibendum

 
Reply With Quote
Old 01-25-2010, 05:24 PM   #115
Brewers Hardware
Sponsor
HBT_SPONSOR.png
Recipes 
 
Dec 2008
Huntington Beach, CA, 92649
Posts: 454
Liked 7 Times on 6 Posts


Quote:
Originally Posted by Spoodbrews View Post
So Derrin, would this nifty contraption work for a 30L "S" type sanke keg that I have?
I'm not sure. If you can email (or post) a picture of the connector I can tell you. The tri clover clamp connects around and over the Sanke connector. The only ones i know for sure work are the "American Type Sanke Connector" Our local brewery has some kegs that take a regular Sanke coupler, but the connector on the keg is a very large block, only the insides are the same and this clamps to the outside.

 
Reply With Quote
Old 01-25-2010, 05:54 PM   #116
flananuts
HBT_LIFETIMESUPPORTER.png
 
flananuts's Avatar
Recipes 
 
Dec 2008
Monmouth County, NJ
Posts: 506
Liked 1 Times on 1 Posts


Sppdbrews, are you taking about "sixtals"? If so it will work. I had a sixtal of a local brew pale ale for a party a while back. It's tall enough for Derrin's fermenter conversion and the tap connection is identical to the 15.5 gal sanke I use for fermenting.

 
Reply With Quote
Old 01-26-2010, 09:19 AM   #117
bhatchable
 
bhatchable's Avatar
Recipes 
 
Aug 2009
San Diego
Posts: 390
Liked 1 Times on 1 Posts


I'm not to concerned with it fitting so much. with the adjustable height racking cane it doesn't matter the height really. the main difference between the american sanke and the european sanke (heineken pony keg) is that instead of the slinky style retainer clip, it has a threaded inside. as far as i know and can tell the threads on the inside of the extension from the top won't affect the installation of this part.

EDIT: when I think I have the money i'm going to order one of these. from what i can tell, the outer diameter of the protuberance at the top is the same as an American sanke, except with a threaded inside, which should be of no consequence with the tri-clover type of seal.

EDIT TIMES TWO:
here is a pic of the spear that came out. you can imagine the threaded inside of the neck. it doesn't seem as though threads on the inside of the neck would stop me from using this. Low pressure transfers here I come!!!!


__________________
Nunc Est Bibendum


 
Reply With Quote
Old 01-26-2010, 08:56 PM   #118
thesanch
Recipes 
 
Jan 2009
Tucson
Posts: 252
Liked 4 Times on 3 Posts


I'm thinking of going with this setup, but I'm having some difficulty thinking up a simple way of attaching my gas line to the blow off port to push the beer out when racking. I would really like to keep my gas lines they way they are (ball lock quick disconnects attached on the end).

I have the 2 keg basic kit from kegconnection. They use some sort of worm clamps that prevent them from being loosened.

Any ideas are welcome.

 
Reply With Quote
Old 01-26-2010, 09:16 PM   #119
flananuts
HBT_LIFETIMESUPPORTER.png
 
flananuts's Avatar
Recipes 
 
Dec 2008
Monmouth County, NJ
Posts: 506
Liked 1 Times on 1 Posts


Hi there

I would recommend you use a dual gauge primary regulator with dual ports. Run one port to a secondary or a set of secondary regulators. The secondaries will control co2 pressure to the kegs, while the second port on the primary will allow you to attach a gas line to run to Derrin's fermenter for pressure transfer. I found that if you map out what you want for your kegerator and for your co2 needs, you can do better than buying a kit. The kit is of course still a good way to go. Here's pictures of the the secondary reg's. I recently added a splitter on one secondary so I can use one regulator to power two kegs at 12lb psi while the other one gets used for force carbing.


Here's the regulator


 
Reply With Quote
Old 01-26-2010, 09:16 PM   #120
lamarguy
 
lamarguy's Avatar
Recipes 
 
Aug 2008
Austin, TX
Posts: 1,653
Liked 25 Times on 24 Posts


Quote:
Originally Posted by thesanch View Post
I'm having some difficulty thinking up a simple way of attaching my gas line to the blow off port to push the beer out when racking.
You can connect the gas line using a 1/4" male flare fitting and 3/8" push-connect tube adapter (1/2" for the newer design). Just unhook and attach the existing MFL connector from your gas line.

If it helps, here is a parts diagram (click to enlarge) for my liquid/gas setup:

Click image for larger version

Name:	Sanke Adapter.jpg
Views:	980
Size:	29.1 KB
ID:	14471
__________________
Doggfather Brewery

Planned: Lambic, American IPA
Fermenting: 6 gals of 1.090 stout (Belgian) & 6 gals of 1.090 stout (English)
Tapped: Berliner Weisse, Black English IPA, German Pils, & Live Oak Primus

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
15.5 gallon Sanke conversion to fermenter keelanfish Fermenters 22 02-25-2016 09:32 PM
1/6th sanke as fermenter kcinpdx Equipment/Sanitation 6 10-11-2014 07:11 PM
Sanke keg conversion to fermenter??? sleepystevenson Equipment/Sanitation 26 10-08-2011 03:27 PM
Sanke keg as apfelwein fermenter? jmp138 Fermenters 8 04-08-2009 12:24 AM
Sanke keg as a 10 gallon fermenter?? givemaboot Fermenters 4 02-02-2009 09:47 PM


Forum Jump