Kegging - How much gas should it use? - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Kegging - How much gas should it use?
Cool Brewing Giveaway - Supporting Membership Drive & Discount

Reply
 
Thread Tools
Old 07-13-2009, 05:08 PM   #1
jett78
Recipes 
 
Feb 2009
Colton, CA
Posts: 69
Liked 1 Times on 1 Posts



I kegged for my first time yesterday and followed the directions from the beer supplier. I had a full CO2 tank, just below the end of the green on the dial. I carbonated, released, repressurized at 8 PSI, sit overnight, now my gas shows at the bottom of the green area, (I'm able to look at it right now to get the number). I thought there may be a leak, so I started pouring some sanitized water around seal locations and saw no bubbles.

Is this normal? Seems like a lot of gas was used. (5 gal tank, 5 gal corny keg).

Also, after the "tapping" pressure is done, does the valve need to remain on?


__________________
I'm not as think as you drunk I am.

 
Reply With Quote
Old 07-13-2009, 05:09 PM   #2
Big10Seaner
Recipes 
 
Feb 2008
Schaumburg
Posts: 670
Liked 7 Times on 7 Posts


The "full" meter will go down once it gets colder, I assume it's in your kegerator. Leave the pressure sit at 8psi for serving.


__________________
End of the Line Brewing
Primary: Caramel Cider
Secondary: Bourbon Vanilla Porter
On tap: Some Sort of IPA, Cherry Cider
Bottled: Belgian Sour (1st place winner Binny's Chicago Comp)

 
Reply With Quote
Old 07-13-2009, 05:22 PM   #3
jett78
Recipes 
 
Feb 2009
Colton, CA
Posts: 69
Liked 1 Times on 1 Posts


Quote:
Originally Posted by Big10Seaner View Post
The "full" meter will go down once it gets colder, I assume it's in your kegerator. Leave the pressure sit at 8psi for serving.
You rock!
Thanks
__________________
I'm not as think as you drunk I am.

 
Reply With Quote
Old 07-13-2009, 05:46 PM   #4
ifishsum
Recipes 
 
Aug 2008
Portland OR
Posts: 1,447
Liked 9 Times on 8 Posts


You can't tell how much gas is in the tank by the high pressure gauge. It will drop in pressure when refrigerated, but by the time it really starts dropping you're basically out of gas. CO2 liquefies under pressure - and as long as there is some liquid left in the tank it will have a certain amount of pressure at a certain temperature. Once the liquid is gone you're just using up the remaining pressure in the tank (which on a small tank won't last long).

Next time you get the tank filled, weigh it before hooking it up. Then if you want to know how much is left, weigh it again. Once it's lost almost 5 lbs you need a refill. It's really the only way to know how much CO2 you have in the tank.
__________________
"If you're gonna be an ape, be a hairy one" - Spyder

Primary 2: Edwort's Robust Porter
Secondary 1: LW Pale Ale
Secondary 1: Blackened Soul RIS
Kegged: Dead Guy Ale
Kegged: Rye Pale Ale
Kegged: Haus Pale Ale
Kegged: Nut Brown Ale
Kegged: Afrikan Amber
Kegged: Jock Scott Ale
Kegged: Afrikan Amber

 
Reply With Quote
Old 07-13-2009, 06:12 PM   #5
Pangea
Recipes 
 
Apr 2009
Lafayette, LA
Posts: 312
Liked 4 Times on 4 Posts


Quote:
Originally Posted by ifishsum View Post
You can't tell how much gas is in the tank by the high pressure gauge. It will drop in pressure when refrigerated, but by the time it really starts dropping you're basically out of gas. CO2 liquefies under pressure - and as long as there is some liquid left in the tank it will have a certain amount of pressure at a certain temperature. Once the liquid is gone you're just using up the remaining pressure in the tank (which on a small tank won't last long).

Next time you get the tank filled, weigh it before hooking it up. Then if you want to know how much is left, weigh it again. Once it's lost almost 5 lbs you need a refill. It's really the only way to know how much CO2 you have in the tank.

+1 Ditto to everything.

 
Reply With Quote
Old 07-13-2009, 07:13 PM   #6
Arkador
Recipes 
 
Apr 2009
Fort Worth, TX
Posts: 1,702
Liked 16 Times on 15 Posts


I think your tank is 5# not gal...

a 5lb tank should force carb and serve 6-8 5gal kegs.

 
Reply With Quote
Old 07-13-2009, 10:53 PM   #7
jett78
Recipes 
 
Feb 2009
Colton, CA
Posts: 69
Liked 1 Times on 1 Posts


Quote:
Originally Posted by Arkador View Post
I think your tank is 5# not gal...

a 5lb tank should force carb and serve 6-8 5gal kegs.
Yeah, 5#, I'm crazy
__________________
I'm not as think as you drunk I am.

 
Reply With Quote
Old 07-14-2009, 01:59 PM   #8
yermej
Recipes 
 
Jul 2008
Cape Girardeau, MO
Posts: 301
Liked 1 Times on 1 Posts


Quote:
Originally Posted by ifishsum View Post
Next time you get the tank filled, weigh it before hooking it up. Then if you want to know how much is left, weigh it again. Once it's lost almost 5 lbs you need a refill. It's really the only way to know how much CO2 you have in the tank.
There should be a tare weight stamped on the tank (TW followed by a number, I think). Then you can keep track without having to wait for your next fill up.



 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
kegging question from a kegging noob RootvonRoot Bottling/Kegging 8 05-22-2009 02:03 PM
Kegging batfishdog37 General Techniques 2 01-25-2009 05:12 PM
kegging docmoran Bottling/Kegging 7 12-18-2008 10:03 AM
New to kegging bigbellybrewery Bottling/Kegging 5 05-15-2008 03:37 PM
Kegging Q MidRex Bottling/Kegging 4 01-08-2007 02:17 PM


Forum Jump