Beersmith- How do I Set it Up for a Batch Sparge? - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Brewing Software > Beersmith- How do I Set it Up for a Batch Sparge?

Reply
 
Thread Tools
Old 07-12-2009, 12:05 AM   #1
RonRock
Always Ready
HBT_LIFETIMESUPPORTER.png
 
RonRock's Avatar
Recipes 
 
Jul 2008
Underwood, Iowa
Posts: 1,263
Liked 8 Times on 8 Posts



I have my equipment set up with as this "Brew Pot (15 Gal) and Igloo/Gott Cooler (10 Gal)"

Mash Profile as "Single Infusion, Light Body, Batch Sparge"


When I do a 11 gallon batch the Brewsheet shows the Mash, then 3 rounds of Batch Sparge.

How do I get it to show Mash and 2 equal Sparges?

 
Reply With Quote
Old 07-12-2009, 01:31 AM   #2
stevea1210
Recipes 
 
Mar 2008
Lancaster, PA
Posts: 747
Liked 2 Times on 2 Posts


There have batches i've done where volume prohibited 2 sparges, and i had to do 3.

That being said, To see if you can do it in only 2, click details in the mash profile.

then in the batch spage section, adjust those settings. I have all 3 boxes checked, and the percent set to 100.
__________________
You'll have to speak up, I'm wearing a towel. - Homer Jay Simpson

 
Reply With Quote
Old 07-12-2009, 01:50 AM   #3
RonRock
Always Ready
HBT_LIFETIMESUPPORTER.png
 
RonRock's Avatar
Recipes 
 
Jul 2008
Underwood, Iowa
Posts: 1,263
Liked 8 Times on 8 Posts


Thanks Stevea1210, I had to set the percent from 90 to 100. And also check the box to drain the tun before starting to Batch Sparge. That fixed it.

Thanks for the help.

Ron

 
Reply With Quote
Old 08-17-2009, 07:57 PM   #4

I'm having a helluva time trying to do this. Just can't seem to get it to show me any info about batch sparges. I setup a medium body single infusion mash with batch sparging. In the main view of the recipe, it just listed the FULL amount of water for sparging, not divided at all. I tried clicking all 3 boxes in the batch sparge options under the detail view for the mash profile and setting it to 100%. Still, it only shows the full volume of sparge water, not divided into equal parts, even though I have that checked.

Am I missing something here? Where are you guys seeing these batch sparge volumes divided into equal volumes? I simply don't see it.
__________________
HOMEBREWING SINCE 1997

 
Reply With Quote
Old 08-17-2009, 08:32 PM   #5
Bokonon
Recipes 
 
Mar 2007
Tri-Cities, WA
Posts: 1,283
Liked 14 Times on 14 Posts


Quote:
Originally Posted by MattHollingsworth View Post
I'm having a helluva time trying to do this. Just can't seem to get it to show me any info about batch sparges. I setup a medium body single infusion mash with batch sparging. In the main view of the recipe, it just listed the FULL amount of water for sparging, not divided at all. I tried clicking all 3 boxes in the batch sparge options under the detail view for the mash profile and setting it to 100%. Still, it only shows the full volume of sparge water, not divided into equal parts, even though I have that checked.

Am I missing something here? Where are you guys seeing these batch sparge volumes divided into equal volumes? I simply don't see it.
The only place you will see those numbers is on the BrewSheet. At the top there is a button for "Preview BrewSheet" Click that and they will be listed on there

 
Reply With Quote
Old 08-17-2009, 08:37 PM   #6

Quote:
Originally Posted by Bokonon View Post
The only place you will see those numbers is on the BrewSheet. At the top there is a button for "Preview BrewSheet" Click that and they will be listed on there
That's it! You rock! Thanks. I was using the print preview button on the upper left.
__________________
HOMEBREWING SINCE 1997

 
Reply With Quote
Old 10-08-2009, 01:46 AM   #7
Rottnme
Recipes 
 
Jan 2007
Wiscownsin
Posts: 124
Liked 3 Times on 3 Posts


Sorry for diggin up an old thread but is there any risk of having too small of a sparge? What is the ideal water to grist ratio for batch sparging? Is there an ideal? Does it/would it change wiht each additional sparge?

My worry is that if you sparge too stiff you would not be able to stir in well enough and not get the efficiency out of the process that you are shooting for. If that's the case, why even bother with a second sparge?

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fly Sparge with Beersmith shoebag22 Brewing Software 5 02-22-2010 08:38 PM
Help with batch sparge settings on beersmith. emgesp1 Beginners Beer Brewing Forum 20 10-22-2009 05:01 AM
Beersmith batch sparge question??? Schnitzengiggle Brewing Software 2 08-20-2009 04:49 PM
Calculating Batch Sparge Temps in Beersmith KingBrianI Brewing Software 5 09-23-2008 12:26 PM
Beersmith sparge question... non-equal batch sizes? Tankard All Grain & Partial Mash Brewing 4 06-05-2008 05:16 AM


Forum Jump