Broken Thermometer Question - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Broken Thermometer Question

Reply
 
Thread Tools
Old 08-21-2006, 12:33 AM   #1
Johnny5
Recipes 
 
Aug 2006
Posts: 27


Greetings all. New poster here so thanks for any input you might give.

If a floating thermometer bottom breaks off into the wort as it's chilling down, is the batch ever OK? Yesterday, we were using a typical floating thermometer (10" with the orange, plasic top to tie strings on) and the bottom inch or so broke off into the wort along with the metallic balls (the red, inner part remained intact).

We siphoned the wort into the primary very carefully by pouring through not only a fine, mesh hops bag, but also another fine strainer. Also, we left the metallic balls in the bottom and the kettle and the glass broke off in mainly one chunk, so we're not concerned about ingesting the balls or glass.

Any idea if this brew is at all still drinkable? I can't find any difinitive answers about the thermometer's contents online except it doesn't seem like those types contain mercury. If there's any doubt, we'll ditch it to be on the side of safety, but if there's any way we can save this otherwise very delicious sounding Chimay clone, we'd love to hear about it.

Thanks!

John Couture

 
Reply With Quote
Old 08-21-2006, 01:26 AM   #2
Yuri_Rage
Gritty.
HBT_MODERATOR.png
 
Yuri_Rage's Avatar
Recipes 
 
Jul 2006
Southwest
Posts: 14,285
Liked 804 Times on 510 Posts


Not sure what the metallic balls were - if they were solid or if the liquid inside the thermometer was a color other than silver, then it probably wasn't a mercury thermometer. Most bulb thermometers these days use colored alcohol (not sure what kind). As long as you can be sure it wasn't mercury, you're probably OK.
__________________
Homebrewed Blog..........YouTube Channel .......... Shirts, posters, etc

 
Reply With Quote
Old 08-21-2006, 01:35 PM   #3
Johnny5
Recipes 
 
Aug 2006
Posts: 27

Yuri,

Thanks so much for your answer about the thermometer. I'll do a bit more checking to try to ensure the batch's safety before proceeding with it. Any more input is welcome.

John

 
Reply With Quote
Old 08-21-2006, 02:21 PM   #4
david_42
 
david_42's Avatar
Recipes 
 
Oct 2005
Willamina & Oak Grove, Oregon, USA
Posts: 25,593
Liked 151 Times on 142 Posts


The balls are probably steel shot, just because it's cheap and totally safe. Since the inner part didn't break, no worries there, regardless of what the red stuff is.
__________________
Remember one unassailable statistic, as explained by the late, great George Carlin: "Just think of how stupid the average person is, and then realize half of them are even stupider!"

"I would like to die on Mars, just not on impact." Elon Musk

 
Reply With Quote
Old 08-21-2006, 06:55 PM   #5
johnsma22
HBT_SUPPORTER.png
 
johnsma22's Avatar
Recipes 
 
Jun 2006
Taunton, MA
Posts: 1,963
Liked 78 Times on 59 Posts


Like David said, the balls used to keep the thermometer floating upright may be steel shot. On the other hand, they may be lead, in which case I would not drink it. See if you can check with the manufacturer of the thermometer to find out what the balls are made of.

John
__________________
Cheers,
John

 
Reply With Quote
Old 08-21-2006, 07:51 PM   #6
Trappist Artist
Recipes 
 
Jul 2006
Posts: 113

Was the thermometer a candy thermometer? If so I would be willing to bet that they wouldn't put anything too harmful in it. And, a mercury thermometer will not have red inside, it will be silver. If the little line that you read is red, it is alcohol.

Cheers

 
Reply With Quote
Old 08-21-2006, 11:24 PM   #7
Johnny5
Recipes 
 
Aug 2006
Posts: 27

Thanks to everyone for the responses. Not sure what a candy thermometer is, but this looks pretty darn close to the one we were using:

http://www.homebrewhq.com/ProductDet...productID=1082

 
Reply With Quote
Old 08-21-2006, 11:35 PM   #8
Johnny5
Recipes 
 
Aug 2006
Posts: 27

I just checked with a local brew store and it looks like the balls are most likely lead -- so unless I find out that siphoning them out will alleviate the danger, I'm not chancing it.

Rats! I'm going to cry as I pour out an otherwise perfect Chimay clone...

Thanks again for the input.

John

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Broken thermometer OldManK General Techniques 15 11-09-2011 09:46 PM
Damn broken thermometer jacksonbrown General Beer Discussion 2 06-17-2009 09:30 PM
Question about broken thermometer. -Rufus- Equipment/Sanitation 4 10-21-2008 02:03 AM
Serious Question (Broken Thermometer in Beer) Waylit Beginners Beer Brewing Forum 30 07-29-2008 01:54 AM
broken thermometer Hercules Rockefeller Equipment/Sanitation 3 05-11-2006 02:59 AM


Forum Jump