Transferring Hot Wort For No-Chill - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > General Techniques > Transferring Hot Wort For No-Chill

Thread Tools
Old 06-17-2009, 03:18 AM   #1
jeffmeh's Avatar
Feb 2009
Posts: 2,160
Liked 211 Times on 181 Posts

I am considering trying to do a no-chill batch. Any recommendations regarding how best to transfer the hot wort to an hdpe container? After chilling, I either use an autosiphon or just pour through a funnel into a carboy. Obviously, pouring hot wort through a funnel will not be good due to hot-side aeration. Will the autosiphon be safe to use with the hot wort? I assume I will have to swap out the basic plastic tubing for something more heat resistant.

At some point, I will probably drill out my kettle and add a weldless fitting and spigot, but I am not really looking to do that at this time.

Any advice will be greatly appreciated.

Reply With Quote
Old 06-17-2009, 03:20 AM   #2
avaserfi's Avatar
Nov 2008
College Station, TX
Posts: 630

Don't use a siphon unless yours is stainless steel. Plastic will melt. If you don't have a spigot, I would just pour it through a funnel and not worry about hot-side aeration.

Reply With Quote
Old 06-17-2009, 03:28 AM   #3
chefchris's Avatar
Jul 2008
Gainesville, Florida
Posts: 1,713
Liked 21 Times on 21 Posts

Yeah, I wouldn't worry abou HSA. Like he said, don't use your autosiphon. No chill brewing is what made me finally put a weldless spigot on my kettle. is a great place and he's a member of this board.

I think you are confuisng circle k with a reach around. - Denny's Evil Concoctions

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Transferring the Wort Into the Carboy piernas Beginners Beer Brewing Forum 6 10-11-2009 08:30 PM
Transferring wort to fermenter brewnscooter Beginners Beer Brewing Forum 12 05-26-2009 01:57 AM
Transferring wort from MLT to kettle? kornbread General Techniques 10 02-07-2009 03:07 PM
Using a wind chill of -5 to chill wort BierMuncher All Grain & Partial Mash Brewing 23 02-08-2007 01:54 AM
Transferring wort to glass carboys. AHammer16 Equipment/Sanitation 12 10-31-2005 10:17 PM

Forum Jump