Kegerator Wiring Help - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators & Keezers > Kegerator Wiring Help

Thread Tools
Old 05-28-2009, 05:40 PM   #1
Ewalk02's Avatar
Mar 2008
Kansas City, Missouri
Posts: 249
Liked 4 Times on 4 Posts

Guys, I am trying to replace the current temp control relay with something a little more precise. I've attached a schematic of the wiring for my keggerator and would really appreciate some suggestions. I was thinking along the lines of a digital display for the current temp and being able to control the compressor so my temps are within about 3 degrees of what I set it to. Thanks in advance!
Click image for larger version

Name:	Snap1.jpg
Views:	370
Size:	148.5 KB
ID:	11350  

Reply With Quote
Old 05-28-2009, 07:41 PM   #2
PintOfBitter's Avatar
Feb 2007
Posts: 1,154
Liked 11 Times on 10 Posts

my advice it to just leave it all intact and switch the mains with a temp controller. turn the built in control down low. By doing it this way you'll leave all the protective features intact, it's much easier, and shouldn't be any more expensive.

Maybe you can use these Grain, Hops, Yeast Reference Charts

Reply With Quote
Old 05-28-2009, 07:43 PM   #3
Displaced MassHole
Displaced MassHole's Avatar
May 2008
San Diego
Posts: 1,134
Liked 10 Times on 8 Posts

Just run your hot lead through a Love Controller and you should be good to go.

This should help
Worthless Brewing Co.
The name says it all

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
BCS-460 and SSR wiring help! cyberbackpacker Brew Stands 8 10-24-2009 08:40 PM
Need help with wiring barnbrew Brew Stands 2 10-02-2009 02:52 AM
Convert Conventional Kegerator to Cornelius Kegerator aschafer324 Bottling/Kegging 3 07-23-2009 10:12 PM
Ease of Going from Sanke Kegerator to Homebrew Kegerator polamalu43 Bottling/Kegging 6 04-28-2008 10:52 PM
Help on wiring attitude Equipment/Sanitation 12 09-20-2007 02:26 PM

Forum Jump