Well I racked my raspberry wheat into a keg today.
But first I replaced all of the o-rings on the 6 kegs I have acquired (they have already been cleaned). Then I assembled my CO2 regulator, 2 airlines, 1 beerline with picnic tap for temporary use(will become my biermeister beergun)and 4 way manifold.
I had to quickly run into town to find a pair of nipper pliers for my o-clamps(another tool for the beer, along with my dedicated corney post wrench)
My kegerator isn't finished but it will hold everything until it is. My tower plan has been rethought. I was looking at converting a old extinguisher into a tower, but couldn't find any. Then I saw a 3 1/2" truck exhaust pipe at Canadian Tire, and thought about using that. but I thought 3 of those at $30 a piece adds up. So now I am planning on doing a coffin box tap.
I still plan on having two lids for this keezer (its huge). A permanently fixed side with a coffin box and drip tray, and a hinged side so I can get the corneys in and out.
Thanks for all the help everyone.