Mistakes I made when kegging the first time - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Mistakes I made when kegging the first time

Reply
 
Thread Tools
Old 05-22-2009, 08:54 PM   #1
OrlandoHomeBrewer
Recipes 
 
Apr 2009
Posts: 51


Today has been a bit of a challenge...

I made Ed Wort's Apfelwein on 3-23 and was ready to keg it today. I also made a Strong Scottsman 2 weeks ago and was ready to transfer it from the primary. I decided to put it in a keg for the secondary (for the 1st time) instead of a carboy.

As a little background, it has been raining here for 5 days straight and I have a detached garage so I spent a lot of time going back and forth and getting drenched.

Cleaned and sanitized the two kegs without a problem...

Decided to move the beer first and that was a HUGE mistake. I realized my tubing was 1/4" and my spigot was 3/8". Like an impatient idiot I decided to just "hold them together" while transferring 5 gallons. It went well for the first 2 gallons. Then my hands started getting tired, beer started leaking and I was too committed to the transfer. While trying to hold it together, the beer was running down my hands and arms into the keg. I finally wound up putting the bucket in my lap and held the keg between my legs at an angle and turned the spigot back on, pouring the beer down the side of the keg. Needless to say, a lot of air was introduced even though I did my best to pour "quietly". I closed the keg and it is just sitting on the tile floor. Assuming it isn't ruined and as I understand it, I am supposed to just pull the relief valve once a day and it should be ok for secondary. Is that right?

Regaining my sanity, I went to the LHBS and bought more 3/8 tubing. Moving the Apfelwein was a piece of cake compared to the beer. Sealed up the keg, hit it with 35 PSI to seat the lid and then dialed it down to 12 PSI. Left the CO2 hooked up and moved it to a closet in the den. My plan is to let it continue to age at room temp for another two weeks (on the gas) and then chill it.

I don't have a fridge yet (I have a search running on Craig's List) so I can't do any better than that for right now.

Something tells me the beer is toast and the Apfelwein is fine. Thoughts? Encouraging replies welcomed.

Len

 
Reply With Quote
Old 05-22-2009, 09:12 PM   #2
Arkador
 
Arkador's Avatar
Recipes 
 
Apr 2009
Fort Worth, TX
Posts: 1,702
Liked 16 Times on 15 Posts


hit that beer with 35psi of CO2, wait a minute, and pull the purge valve for about 5 seconds. I bet it will be fine.

if it is in your budget, check out Magic Chef 7.2 Cu. Ft. Chest Freezer - MCCF7WBX at The Home Depot

Very popular keezer. Will hold 4 kegs with no mods (other than a temp controler). and 6 kegs with a colar.


 
Reply With Quote
Old 05-22-2009, 10:44 PM   #3
OrlandoHomeBrewer
Recipes 
 
Apr 2009
Posts: 51

Thanks and thanks.

I hit the beer with 35 PSI for a minute and then pulled the relief valve until it was just barely whistling.

There have been a number of working fridges on Craig's List for under $50 locally. I have just been slow moving on them since I didn't have anything in the keg. Can't use that excuse anymore...

 
Reply With Quote
Old 05-22-2009, 10:51 PM   #4
Yooper
Ale's What Cures You!
HBT_ADMIN.png
 
Yooper's Avatar
Recipes 
 
Jun 2006
UP of Michigan, Winter Texan
Posts: 69,231
Liked 7727 Times on 5425 Posts


At temperature, 12 psi won't carbonate your cider. If you want it carbed in a week or two, you need to turn it way up. I'll find a link to a carbonation chart.

CO2 doesn't dissolve easily into room temperature liquid, so you need a much higher PSI when carbonating a room temperature liquid. Around 30 psi, but I'll find the link to be sure.
__________________
Broken Leg Brewery
Giving beer a leg to stand on since 2006

 
Reply With Quote
Old 05-22-2009, 11:44 PM   #5
jezter6
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Nov 2006
DARLINGTON, MARYLAND
Posts: 4,289
Liked 14 Times on 14 Posts


Quote:
Originally Posted by YooperBrew View Post
At temperature, 12 psi won't carbonate your cider. If you want it carbed in a week or two, you need to turn it way up. I'll find a link to a carbonation chart.

CO2 doesn't dissolve easily into room temperature liquid, so you need a much higher PSI when carbonating a room temperature liquid. Around 30 psi, but I'll find the link to be sure.
It's not easy to read, but:

Force Carbonation & Carb Table
__________________
http://www.survivalsupplyhq.com

 
Reply With Quote
Old 05-23-2009, 11:42 AM   #6
OrlandoHomeBrewer
Recipes 
 
Apr 2009
Posts: 51

Thanks for the heads up. If I just want to age it in the keg at room temperature what should I do?

 
Reply With Quote


Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Various mistakes made during brew. justin22 Beginners Beer Brewing Forum 9 07-03-2009 07:11 PM
Oops! -or- Mistakes you made when you knew better. Rook Beginners Beer Brewing Forum 2 01-20-2009 03:53 AM
I made some mistakes.... Jeffro Beginners Beer Brewing Forum 4 03-09-2008 05:09 AM
I made a few mistakes Bruiz54 Beginners Beer Brewing Forum 7 01-29-2008 12:16 AM
Mistakes I made brewing yesterday...effects? Tophe All Grain & Partial Mash Brewing 8 04-08-2007 05:09 PM


Forum Jump