Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Bitter Bitter Bitter
Reply
 
Thread Tools
Old 05-22-2009, 04:49 PM   #1
1GR8DA
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2009
Location: Bristow, Va
Posts: 149
Liked 9 Times on 7 Posts

Default Bitter Bitter Bitter

I have brewed two pale ale kits. One was extract and the other all grain. Both have turned out okay but exceptionally bitter. The extract kit had steeping grains. I never exceeded 170 degrees with the water (no notes in front of me) but the gravities were on point both times (starting and final). They were left for two weeks in the primary and two additional weeks in the secondary. Bottled and conditioned for three to four weeks. They are good but.... WAY Bitter.
Brewers Best extract w/grains
Midwest Sierra Nevada Clone.

What else could be causing the off taste? Any ideas or suggestions would be helpful. I'm brewing the Midwest Simcoe IPA this weekend and would like to have a better result.
Thanks everybody!


1GR8DA is offline
 
Reply With Quote
Old 05-22-2009, 04:58 PM   #2
Boondoggie
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2008
Location: Manchvegas, NH
Posts: 230
Liked 3 Times on 2 Posts

Default

Did you do full boils?
If you did, did you reduce the amount of bittering hops?


Boondoggie is offline
 
Reply With Quote
Old 05-22-2009, 05:04 PM   #3
1GR8DA
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2009
Location: Bristow, Va
Posts: 149
Liked 9 Times on 7 Posts

Default

The extract was a partial boil (This was one of my first kits and I thought I was doing good by "sqeezing" the juices from the bag). The all grain was a full boil. Was I foolish to assume that an all grain kit with full boil water measurements would calculate the necessary hop additions/subtractions?
1GR8DA is offline
 
Reply With Quote
Old 05-22-2009, 05:07 PM   #4
GilaMinumBeer
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
GilaMinumBeer's Avatar
Recipes 
 
Join Date: Jan 2008
Posts: 52,942
Liked 6056 Times on 5221 Posts
Likes Given: 81

Default

Do you know the Sulfate levels of the water you are using?

SO4 can accentuate bitterness if in high levels (400 ppm or greater, IIRC) I ask that becuase I used to have that problem specifically with Chinook (and I love that hop, only I realize that SNPA uses Cascade).
GilaMinumBeer is offline
 
Reply With Quote
Old 05-22-2009, 05:14 PM   #5
1GR8DA
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2009
Location: Bristow, Va
Posts: 149
Liked 9 Times on 7 Posts

Default

I haven't checked the water ph however (I know I'm a rookie) I used the BeerSmith water profiles for my area (DC suburbs). With that and the water filter from my fridge I figured I was alright but no I don't know the exact ph or sulfer levels of my water.


1GR8DA is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Too Bitter AndrewKemendo General Techniques 9 07-05-2011 03:40 PM
Bitter APA Lando All Grain & Partial Mash Brewing 4 07-17-2009 10:25 PM
Bitter Beer Face or Why the Bitter Beer Matt Up North General Beer Discussion 19 03-05-2009 05:06 AM
Just a Little Bitter TSH_Lance Extract Brewing 4 02-26-2009 04:59 PM
Bitter or Best Bitter B-rad General Beer Discussion 2 09-11-2008 01:21 AM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS