Garage home brewery - Page 14 - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > Garage home brewery

Reply
 
Thread Tools
Old 05-24-2010, 07:31 PM   #131
blackheart
Recipes 
 
May 2008
Binghamton, NY
Posts: 315
Liked 11 Times on 7 Posts


Quote:
Originally Posted by lschiavo View Post
Nice. I had no idea they were rated for ac or such current. Where did you get the ones you used? It makes a nice clean controller and moving it around for another application as you mentioned would be great.

I am just setting up a chest freezer ferm chamber and have to put together my controller yet. I may steal a few of your ideas. The magnets are sweet also.
Dont recall the brand, but here is a link to another XLR connector which shows the voltage rating. Picked them up at the local electronics store. http://mouser.com/ProductDetail/Amph...lBMux1bOAuZsIP
__________________
Black Heart Brewery


 
Reply With Quote
Old 05-26-2010, 02:56 AM   #132
Drunkenfool
Recipes 
 
Apr 2009
Bloomington il
Posts: 61

Dude, you will be friggin jacked when you have a designated space. I have a good corner of a heated garage and couldn't be happier than if I was greased up and sliding down a mountain of titties.. The best thing I ever saw and grabbed the first chance I could was a commercial 8 ft double sink with the drainboards and the sprayer i can clean all my ag stuff and just leave it to Drain- You definitely need to finagle hot water to your space. I ran pex hot and cold inside a larger plastic pipe to keep them thawed in -15.. The drain just runs to the mulch. I see you may have the same issue with the h2o but you have to have it somehow... The sink isthe **** though, craigslist for closing restaurants etc. Paid like $300 total

 
Reply With Quote
Old 07-29-2010, 05:42 PM   #133
blackheart
Recipes 
 
May 2008
Binghamton, NY
Posts: 315
Liked 11 Times on 7 Posts


The hops are up and starting to climb...




__________________
Black Heart Brewery

 
Reply With Quote
Old 07-29-2010, 05:50 PM   #134
Randar
All your Ninkasi are belong to us
HBT_LIFETIMESUPPORTER.png
 
Randar's Avatar
Recipes 
 
Sep 2008
Wheeling, IL
Posts: 40,885
Liked 5409 Times on 5215 Posts


Quote:
Originally Posted by blackheart View Post
We spent about 5,000 on the garage remodeling, the doors were about $1,200 and the ceiling was somewhere close to $1,000 with all of the tiles, lights, and insulation etc. Already spent over $600 on strippers and epoxy paint on the floors which will now have to be removed.... so we are already -$600... lets see if we can find some investors..... If we can afford it it would be a great idea.... I am liking the Coin style best as I think it could create better channels to mop up spills etc. Thanks for the link!
Use a high quality epoxy if you want to be able to clean it. It isn't cheap, but it is permanent and relatively indestructible if you install it properly. I installed Wolverine Coatings on my floor (a badly stained/pitted floor that had cracks needing repair and shot-blasting for prep) for roughly that price for a similar sq footage. I know it is in use in processing facilities that have to pass USDA and FDA inspections.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
New Garage and the Phoenix Brewery Warrior Brew Stands 132 08-27-2015 12:58 PM
I've got a ghost in my brewery/garage Sea General Chit Chat 11 08-26-2010 03:31 PM
New Home for the Brewery thorongil Equipment/Sanitation 5 05-30-2009 01:58 AM
Cleaned the garage and found a brewery Brewpastor Equipment/Sanitation 4 01-28-2008 11:40 PM
Home Brewery Skrimpy All Grain & Partial Mash Brewing 14 06-29-2007 12:03 AM


Forum Jump