My first AG setup - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > My first AG setup

Reply
 
Thread Tools
Old 05-19-2009, 01:03 PM   #1
spin02
HBT_SUPPORTER.png
 
spin02's Avatar
Recipes 
 
Apr 2009
Lebanon, Virginia
Posts: 156



I am in the process of putting together my first all grain setup. My 40qt pot should be delivered today. Last night I made my mash tun and HLT decision. I found 2-10 gallons rubbermaids at Home Depot for $35 each. I had been using a friends rubbermaids and have no problems at all with them.

My plans now are to order a Kewler Kitz blukhead and False bottom, then pick up the ball valves and barbs at a hardware store. Probably just going to batch sparge for now, maybe build/buy a sparge arm at some point.

I also plan on building an immersion chiller. Seems simple enough.

Does this sound like I am on the right track?
__________________
Overmountain Brewers

On Deck: Big Hoppa v2.0, Traditional Porter, Scottish 60
Fermenting:
On Tap: Danky West Coast IPA, Dark Sky English Mild

 
Reply With Quote
Old 05-19-2009, 01:05 PM   #2
Kelsch
Recipes 
 
May 2008
Twin Cities, MN
Posts: 305
Liked 1 Times on 1 Posts


Sounds like a solid start to me.
__________________
No trees were killed in the posting of this message. However a large number of electrons were terribly inconvenienced.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Tap Setup? daveooph131 Bottling/Kegging 6 05-20-2009 01:29 AM
looking for Keg setup Kronin Bottling/Kegging 2 02-11-2009 08:11 PM
keg setup flyweed Bottling/Kegging 6 12-11-2008 05:48 PM
What was your first setup? Bandit112 Beginners Beer Brewing Forum 14 08-11-2007 03:37 AM


Forum Jump