Mash tun slots - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Mash tun slots

Thread Tools
Old 05-05-2009, 05:43 PM   #1
Apr 2009
Birmingham UK
Posts: 169
Liked 1 Times on 1 Posts

When comparing large brewey mash tun slots with the false bottoms we use there seems to be a much bigger percentage of holes in our false bottoms. I have seen the clever punched sheet system that Blichmann engineering use and it seems to me that it mimics the larger brewerys equipment much more accurately, and will be less likely to clog. So as it looks such an elegant solution, I want to make one!

Has anyone got one of these Blichmann bottoms to hand, and can they tell me how far the punched disks have been pushed through the sheet, IE how big is the slot vertically? I can then make a punch up for the fly press at work and get to work.............
Blessed are the "cracked", for it is they who let in the light.

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
How much mash can a mash tun mash? Need Help for Tomorrow's Brew! ryan_pants Equipment/Sanitation 8 09-19-2014 05:39 PM
partial mash.OG,break material,mash tun efficiancy questions dzlater All Grain & Partial Mash Brewing 9 07-07-2008 12:15 AM
Grinding Slots in Copper Tube for Collection Manifold Moonpile Kettles, Mash Tuns & Hot Liquor Tanks 23 03-19-2008 06:31 PM
Lauter tun manifold slots / even flow. DyerNeedOfBeer Equipment/Sanitation 0 09-05-2005 05:28 PM

Forum Jump