Force Carbing w/ diffusion stone - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Force Carbing w/ diffusion stone

Reply
 
Thread Tools
Old 04-29-2009, 08:43 PM   #1
briewer2
Recipes 
 
Feb 2009
Posts: 64


So this is my first time kegging and I'm obviously excitied and very impatient. I recently got an oxygenation kit so I have a 2 micron diffusion stone. I was wondering if anyone knows a place to find good instructions on how to carb with a stone. Can I do it with a 2micron or do i need a finer one? I did search for a thread and was unable to find a good one. Im going to start the "set n forget" method after this, but as I said, this is my first and I'm antsy.

Thanks all.

 
Reply With Quote
Old 04-29-2009, 09:05 PM   #2
hayabusa
Recipes 
 
Jan 2009
Posts: 326

you really don't need it. Pressurize the keg and roll it around for 30 mins under pressure until you reach your desired carb levels.... the stone isn't necessary at all and would "keep the stone" useless when you may need it for aeration on another batch since once its in the keg on the dip tube, its in the keg until you drain it.
__________________
shocker brewing - two in the pale, one in the ale.

 
Reply With Quote
Old 04-29-2009, 10:00 PM   #3
david_42
 
david_42's Avatar
Recipes 
 
Oct 2005
Oak Grove, Oregon, USA
Posts: 25,597
Liked 155 Times on 145 Posts


To carbonate with a stone, you have to connect the stone to the gas-in. There are carbonating tubes/stones available, but you'd have to have one for each keg.

A week is plenty of time to set'n'forget.
__________________
Remember one unassailable statistic, as explained by the late, great George Carlin: "Just think of how stupid the average person is, and then realize half of them are even stupider!"

"I would like to die on Mars, just not on impact." Elon Musk

 
Reply With Quote
Old 04-29-2009, 11:14 PM   #4
hayabusa
Recipes 
 
Jan 2009
Posts: 326

Quote:
Originally Posted by david_42 View Post
To carbonate with a stone, you have to connect the stone to the gas-in. There are carbonating tubes/stones available, but you'd have to have one for each keg.

A week is plenty of time to set'n'forget.
The Gas-in post isn't sufficient since the stone won't be in the beer - you need to have an alternate gas-in line w/ a dip tube putting the stone at the bottom of the keg - it's hardly worth it when you can pressurize and shake...
__________________
shocker brewing - two in the pale, one in the ale.

 
Reply With Quote
Old 04-30-2009, 01:29 AM   #5
impetus19
Recipes 
 
Sep 2008
NJ
Posts: 39
Liked 1 Times on 1 Posts


I am not the expert on this by any means but i have tried the diffusion stones attached to a gas in line via a 2' hose and i wasnt impressed in fact i stopped using it.
They have to be cleaned (and i mean boiled) after every batch other wise they will clog
and the couple times i did use it, the beer did not carb any faster.

To answer your question 2 micron would be fine. It probably wont clog as easy.

 
Reply With Quote
Old 05-12-2009, 04:37 PM   #6
TAD
Recipes 
 
Jan 2009
Posts: 11

Everywhere that I've read about diffusion stones it says to only use 2 psi when carbonating. Has anyone tried/ know what happens if you go higher?

 
Reply With Quote
Old 05-14-2009, 11:56 PM   #7
greencon
Recipes 
 
Sep 2008
Farmington, MI
Posts: 57
Liked 2 Times on 2 Posts


I made this as an experiment:



It's a carbonating lid with a 2 micron stone, so I can swap to different kegs. I set the pressure to proper psi for desired volumes of co2 and it's fully carbonated in about 2 days. The stone has never clogged for me. It's not necessary but it was a fun project an I am happy with the results.
__________________
Michigan Mashers HBT
Motor city Mashers
Primary:
Denny's Rye IPA
Northern Brewer IPA
Honkers Ale Clone
On Tap:
Auby American Wheat
Citra Plale Ale
Centennial Blonde

LoloMT7 Likes This 
Reply With Quote
Old 05-16-2009, 04:39 PM   #8
greencon
Recipes 
 
Sep 2008
Farmington, MI
Posts: 57
Liked 2 Times on 2 Posts


Here's a couple of articles related to the topic.
BYO 3-ways to carb you keg

BYO Mr.Wizard Force Carbonation
__________________
Michigan Mashers HBT
Motor city Mashers
Primary:
Denny's Rye IPA
Northern Brewer IPA
Honkers Ale Clone
On Tap:
Auby American Wheat
Citra Plale Ale
Centennial Blonde

 
Reply With Quote
Old 05-17-2009, 01:15 AM   #9
78kombi
Recipes 
 
Jan 2009
North Central Mass
Posts: 205
Liked 1 Times on 1 Posts


Greencon = smart, though i will not use a stone.but still smart.

 
Reply With Quote
Old 05-17-2009, 02:15 AM   #10
greencon
Recipes 
 
Sep 2008
Farmington, MI
Posts: 57
Liked 2 Times on 2 Posts


Quote:
Originally Posted by 78kombi View Post
Greencon = smart, though i will not use a stone.but still smart.
Thanks, Just another tool in the tool box.
__________________
Michigan Mashers HBT
Motor city Mashers
Primary:
Denny's Rye IPA
Northern Brewer IPA
Honkers Ale Clone
On Tap:
Auby American Wheat
Citra Plale Ale
Centennial Blonde

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
The oxynater diffusion stone luv2brw General Beer Discussion 1 08-15-2009 05:25 AM
Oxygen regulator and Diffusion Stone avaserfi For Sale 2 06-16-2009 02:26 AM
Diffusion Stone Clogged? Gord-o Equipment/Sanitation 10 04-26-2009 03:54 PM
Aerating w/ diffusion Stone jeff_2506 General Beer Discussion 6 08-30-2008 05:54 AM
Any problem with using a ceramic diffusion stone? newB_newyorker Equipment/Sanitation 1 12-22-2007 07:54 PM


Forum Jump