fridge door - Home Brew Forums
Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators & Keezers > fridge door
Cool Brewing Giveaway - Supporting Membership Drive & Discount

Reply
 
Thread Tools
Old 04-29-2009, 04:30 PM   #1
killian
Recipes 
 
Apr 2007
western/central new york
Posts: 1,486
Liked 12 Times on 12 Posts



I just got my fridge out of storage and I'm starting to work on setting it up as a kegerator and I need to remove the old plastic from the inside of the door and I'm just wondering what everyone else has used to replace this. I'm thinking that lowes will carry some kind of hard plastic sheeting like a shower wall replacement or some thing. does anyone have a link to a kegerator build using an old freezer on top fridge?


__________________
damn I gotta brew something

 
Reply With Quote
Old 04-29-2009, 04:37 PM   #2
davebl
Recipes 
 
Nov 2007
Central Arkansas
Posts: 286
Liked 2 Times on 2 Posts


I use dry erase board from lowes.


__________________
My RIMS Brewery Build Project

Planning:

Primary: Sam Smith Oatmeal Stout

Secondary: Centennial IPA (Dry Hopping)

Kegged: Oberon Clone, Kona Fire Rock APA, Northern English Brown, Centennial Blond

 
Reply With Quote
Old 04-29-2009, 05:09 PM   #3
TheFlyingSparge
HBT_SUPPORTER.png
 
TheFlyingSparge's Avatar
Recipes 
 
Mar 2009
Rhode Island
Posts: 123
Liked 3 Times on 3 Posts


Silicone sealed a 14"x14" piece of 1/8" plexy around my 4 shanks and left the rest of the door exposed. Haven't had any issues.

If you haven't thought about it, heard it's a good idea to leave a strip of the original plastic intact under the door's rubber edge seal. Ensures proper suction when closed.

 
Reply With Quote
Old 04-29-2009, 06:35 PM   #4
Cpt_Kirks
Recipes 
 
Sep 2008
Lakeland TN
Posts: 3,709
Liked 47 Times on 41 Posts


I just cut the shelves off the door, and used a scrap piece of plexiglass to hold it together. I laid the door on a flat surface to make sure it lined up right.

This is a CL junker fridge, but it works fine so far.

 
Reply With Quote
Old 04-29-2009, 06:40 PM   #5
McKBrew
 
McKBrew's Avatar
Recipes 
 
Oct 2006
Hayden, Idaho
Posts: 8,180
Liked 35 Times on 30 Posts


I just lined it with another piece of styrofoam.
__________________
Make Beer, Not War.

 
Reply With Quote
Old 04-29-2009, 06:53 PM   #6
Boerderij_Kabouter
 
Boerderij_Kabouter's Avatar
Recipes 
 
Dec 2007
Oconomowoc, Wisconsin
Posts: 7,736
Liked 146 Times on 118 Posts


I lined mine with guilt, internal sorrow, and duck feet.









that or white board material. I forget.

 
Reply With Quote
Old 04-30-2009, 12:42 AM   #7
jbg278
Recipes 
 
Feb 2009
Topeka, KS
Posts: 1

I went to my local HVAC supply store and got a piece of galvanized sheet metal. They had a piece of scrap about the size I needed and gave it to me for nothing.

 
Reply With Quote
Old 04-30-2009, 12:54 AM   #8
ClaudiusB
Recipes 
 
Dec 2007
El Paso, Texas
Posts: 1,349
Liked 98 Times on 75 Posts


I used 1/8" ABS panel, looks original.

Cheers,
ClaudiusB

 
Reply With Quote
Old 04-30-2009, 01:04 AM   #9
RogerMcAllen
Recipes 
 
Apr 2009
Decatur, IL
Posts: 606
Liked 6 Times on 6 Posts


I went cheap and used a piece of 1/2 foam board to line the inside of my door sealed on the edges with tape.

 
Reply With Quote
Old 04-30-2009, 03:34 PM   #10
Xakk
Recipes 
 
Feb 2009
Tulsa, OK
Posts: 124
Liked 5 Times on 2 Posts


+1 for dry erase board.




 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Drilling through door of fridge... MightyCow9 Equipment/Sanitation 4 01-13-2009 03:46 AM
Plastic Inside of Fridge door bmac197 Bottling/Kegging 7 08-01-2008 02:17 PM
Drilling through Fridge door whackenstack Equipment/Sanitation 9 06-12-2008 01:53 PM
Fridge for kegs won't fit through the door :(( mrkeeg Bottling/Kegging 13 01-20-2008 10:25 PM
Removing the Door from a fridge bechbd Bottling/Kegging 3 09-22-2006 12:54 PM


Forum Jump