Spike Brewing Giveaway - New v3 Kettle

Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > water volume and s.g. question
Thread Tools
Old 04-18-2009, 01:50 AM   #1
Feedback Score: 0 reviews
Join Date: Mar 2009
Posts: 8
Default water volume and s.g. question

I'm fairly new to all grain having only completed 10 batches using prepared kits and recipe's. In the beginning my volume and s.g. reading were all over the board when compared to the recipe guidelines. After the first two batches, I started using my refractometer to guide my brewing and recorded everything. Thankfully, I'm starting to zero in on water additions, loss to grain and boil, yields...etc.

Today I started wondering why I can't just use the refractometer and ignore some of the other calculations. For instance, I flysparge and collect until my Brix gets down to about 2 which is about 1.01 s.g. I figure if my volume is less than what I expected my yield is not good. If it is better, then I did well. Since I started this, my yields have improved above 85%. Am I collecting more fermentable sugars because my sparge is not preplanned, but based on real sugar extraction?

When I boil I not only shoot for the boil time and volume, but for the beginning gravity defined in the recipe. Today, my starting gravity should have been 1.04 on a 5 gallon batch of Irish Red Ale. I ended up with close to 6 gallons at the same s.g. but I had to add water.

With the data I have gained through my prior batches, I feel comfortable I have a pretty good handle on the assumptions needed for Promash and some of the simple calculators on the web. My question is should I keep the training wheels on or stop shooting for numbers? Would someone please comment on this process. Am I moving the wrong direction? If so, how.

whackfol is offline
Reply With Quote
Old 04-18-2009, 04:07 AM   #2
Feedback Score: 0 reviews
WBC's Avatar
Join Date: Jun 2007
Location: La Puente, CA, California
Posts: 2,165
Liked 8 Times on 8 Posts


You are learning a lot and keep it up if you like to do so because you will find that in the long run you will know a lot more about this than people who are just to lazy to learn anything and therefore you will be able to brew better beer.

Fermentor 1: Bill's House Ale II, Fermentor 2: German Helles, Fermentor 3: Bill's Schworzbier (Black Bier)
Tap 1: Bill's House Ale II, Tap 2: German Hefewizen, Tap 3: Nut Brown Ale
Future Brews: Stone IPA Clone, Blonde Ale, Budvar Clone, Newcastle Clone
New toy: Blichmann 27 gallon fermentor

“If you find yourself in a hole, the first thing to do is stop digging”

“Good judgment comes from experience, and a lotta that comes from bad judgment”
WBC is offline
Reply With Quote

Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
AG water volume question.... mullimat All Grain & Partial Mash Brewing 4 10-31-2008 01:08 PM
water volume question re: PM riored4v All Grain & Partial Mash Brewing 9 04-11-2008 06:34 PM
Volume of Water jimg Beginners Beer Brewing Forum 4 12-07-2007 03:05 PM
Water volume question ayrton All Grain & Partial Mash Brewing 6 01-30-2007 12:09 PM
Boil Water Volume Question NCastle Beginners Beer Brewing Forum 6 01-11-2007 07:20 PM

Forum Jump