Is an airlock really necessary? - Page 2 - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > General Techniques > Is an airlock really necessary?

Reply
 
Thread Tools
Old 04-18-2009, 01:36 AM   #11
llazy_llama
 
llazy_llama's Avatar
Recipes 
 
Jan 2009
Rapid City, South Dakota
Posts: 2,839
Liked 90 Times on 28 Posts


Quote:
Originally Posted by GoBrewers View Post
There is a layer of CO2 protecting your beer, but its not going to stay there without an airlock. If you only use foil, you're allowing the headspace to reach equilibrium with the surrounding atmosphere, meaning CO2 out, room air in. And oxidized beer.

An airlock is like 2 bucks. Why not use one?
Yeah, that's just incorrect. How exactly does O2 get in there, when CO2 is heavier? Perhaps the O2 just wants it more? CO2 is heavier than O2, which is why our beer has that lovely protective cushion.

I suppose my last ~20 batches of beer have all been oxidized? They've all been made using tinfoil in place of airlocks, so they must all taste like soggy cardboard. Crap, I guess I'd better dump this glass of Oatmeal Stout that I'm drinking!
__________________
Quote:
Originally Posted by Catt22 View Post
I would never use a dead mouse in my beer. It's much better to use live ones. You could probably just steep a dead one, but live ones must be mashed. Actually, smashed and mashed would be best.

 
Reply With Quote
Old 04-18-2009, 01:48 AM   #12

I regularly use, in order of frequency:

- tinfoil
- inverted half-pint jars
- a sheet of plexiglass (for bucket fermenters); get rid of those blasted lids.
- 3 piece airlocks

 
Reply With Quote
Old 04-18-2009, 01:49 AM   #13
wilserbrewer
BIAB Expert Tailor
HBT_SPONSOR.png
 
wilserbrewer's Avatar
Recipes 
 
May 2007
Jersey Shore, Jersey
Posts: 9,434
Liked 1319 Times on 1011 Posts


My airlock collection is collecting dust in my cabinet. I use alum foil or just a lid that is not absolutely airtight. I think airlocks are a nice idea for a beer or wine that will spend a long time in secondary. For a typical beer that's out and done in a fortnight, I think the risk is minimal to nonexistent. I don't see many fruit flys around here, but i'll admit, they make me nervous.

Now having the solution in the airlock go back into the fermenter...that really sucks...hah...badumbump.

 
Reply With Quote
Old 04-18-2009, 01:50 AM   #14
llazy_llama
 
llazy_llama's Avatar
Recipes 
 
Jan 2009
Rapid City, South Dakota
Posts: 2,839
Liked 90 Times on 28 Posts


Quote:
Originally Posted by flyangler18 View Post
I regularly use, in order of frequency:

- tinfoil
- inverted half-pint jars
- a sheet of plexiglass (for bucket fermenters); get rid of those blasted lids.
- 3 piece airlocks
That is an exact depiction of my regular hat rotation.
__________________
Quote:
Originally Posted by Catt22 View Post
I would never use a dead mouse in my beer. It's much better to use live ones. You could probably just steep a dead one, but live ones must be mashed. Actually, smashed and mashed would be best.

Franc103 Likes This 
Reply With Quote
Old 04-18-2009, 01:56 AM   #15
ChshreCat
 
ChshreCat's Avatar
Recipes 
 
Aug 2008
Camano Island, Washington
Posts: 11,538
Liked 539 Times on 431 Posts


Long secondaries... yeah, I'd call an airlock at least close to necessary. But outside of that and fruit fly season, a bit of sanitized foil works just great.
__________________
"Science + beer = good!"
-Adam Savage

 
Reply With Quote
Old 04-18-2009, 02:01 AM   #16
wilserbrewer
BIAB Expert Tailor
HBT_SPONSOR.png
 
wilserbrewer's Avatar
Recipes 
 
May 2007
Jersey Shore, Jersey
Posts: 9,434
Liked 1319 Times on 1011 Posts


Ok...I'll go one further, sanitized tin foil?? I just assume fresh off the roll is pretty sanitary...no?

 
Reply With Quote
Old 04-18-2009, 02:03 AM   #17

Quote:
Originally Posted by wilserbrewer View Post
Ok...I'll go one further, sanitized tin foil?? I just assume fresh off the roll is pretty sanitary...no?
In theory, yes. But kitchens aren't. Sanitize.

 
Reply With Quote
Old 04-18-2009, 02:04 AM   #18
llazy_llama
 
llazy_llama's Avatar
Recipes 
 
Jan 2009
Rapid City, South Dakota
Posts: 2,839
Liked 90 Times on 28 Posts


Quote:
Originally Posted by wilserbrewer View Post
Ok...I'll go one further, sanitized tin foil?? I just assume fresh off the roll is pretty sanitary...no?
Pretty sanitary? Probably.

Worth risking 5 gallons of beer on? No way. Spray that sheet with some Star San, and set your mind at ease.

ChshreCat: You are exactly right. I'll do tinfoil for extended primaries (successfully up to and including 10 weeks) but I don't for secondaries. Maybe I'm just paranoid, and granted I don't secondary often, but for secondary I'll use an airlock. Good catch.
__________________
Quote:
Originally Posted by Catt22 View Post
I would never use a dead mouse in my beer. It's much better to use live ones. You could probably just steep a dead one, but live ones must be mashed. Actually, smashed and mashed would be best.

 
Reply With Quote
Old 04-18-2009, 02:34 AM   #19
GoBrewers
Recipes 
 
Mar 2007
Minneapolis, MN
Posts: 72

I see your point - beer doesn't spend enought time in the carboy for oxidation to be much of an issue. I did, however, lose a batch of wine to oxidization after I'd let the airlock dry out.

I know that CO2 is heavier than air, but I would argue that it doesn't take much to create enough of a disturbance to "splash" CO2 out of a carboy once fermentation has stopped - opening a nearby door, walking past, whatever. CO2 is heavy but it's not that heavy.

Like you said - I'm sure your beer turns out fine but after dumping that 6 gallons of wine I'm an airlock fan.
__________________
GoBrewers

 
Reply With Quote
Old 04-18-2009, 02:37 AM   #20
llazy_llama
 
llazy_llama's Avatar
Recipes 
 
Jan 2009
Rapid City, South Dakota
Posts: 2,839
Liked 90 Times on 28 Posts


Wine = ~6 months in fermentation.


Beer = ~6 weeks from kettle to glass.


Are we seeing a slight discrepancy here?
__________________
Quote:
Originally Posted by Catt22 View Post
I would never use a dead mouse in my beer. It's much better to use live ones. You could probably just steep a dead one, but live ones must be mashed. Actually, smashed and mashed would be best.

 
Reply With Quote


Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Secondary in the Keg - Airlock or No Airlock? Chello Bottling/Kegging 12 03-26-2012 11:41 AM
Noob: To airlock or not to airlock the primary? Gabrew Beginners Beer Brewing Forum 14 03-29-2011 06:28 PM
S airlock woopig Beginners Beer Brewing Forum 7 08-24-2009 12:38 AM
airlock galaxyglass Equipment/Sanitation 16 09-30-2008 03:22 PM
No Airlock Dark_Ale Winemaking Forum 7 07-24-2007 03:45 PM


Forum Jump