Cheapest place to get secondary regulators - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Cheapest place to get secondary regulators

Reply
 
Thread Tools
Old 04-09-2009, 03:21 PM   #1
GreenMan
Recipes 
 
Sep 2008
Wheat Ridge, CO
Posts: 81
Liked 2 Times on 2 Posts



Anyone know of the cheapest place to get secondary regulators?

 
Reply With Quote
Old 04-09-2009, 03:42 PM   #2
camiller
Recipes 
 
Apr 2007
Omaha, NE
Posts: 1,901
Liked 32 Times on 32 Posts


Sometimes American science and surplus has them. Otherwise Ebay, craigslist, etc.

 
Reply With Quote
Old 04-09-2009, 04:11 PM   #3
Azrack
Recipes 
 
Feb 2009
Mobile, Al
Posts: 26

An option you might try is Harbor Freight - Harbor Freight Tools - Quality Tools at the Lowest Prices
they also have small regulators you can put inline - Harbor Freight Tools - Quality Tools at the Lowest Prices

I use these for 3 different keg setups and never had a problem

Az~

 
Reply With Quote
Old 04-09-2009, 04:44 PM   #4
GreenMan
Recipes 
 
Sep 2008
Wheat Ridge, CO
Posts: 81
Liked 2 Times on 2 Posts


Quote:
Originally Posted by Azrack View Post
An option you might try is Harbor Freight - Harbor Freight Tools - Quality Tools at the Lowest Prices
they also have small regulators you can put inline - Harbor Freight Tools - Quality Tools at the Lowest Prices

I use these for 3 different keg setups and never had a problem

Az~
These look perfect. Thanks. Did you mount these? If so mind posting a picture of how?

Would this one be any different? Better or worse? 160 PSI HVLP Air Regulator
I like the larger dial is all and that I can see it has a female and male connection. Does the one you sent have two males or one of each also. I can only see one connection in the photo and the description only talks about the outlet. Thanks again.

 
Reply With Quote
Old 04-09-2009, 06:52 PM   #5
Damonic
Recipes 
 
May 2008
Chicagoland
Posts: 434
Liked 2 Times on 2 Posts


Hmmm... there's a HF store about 45 minutes away...

EDIT: I meant HF as in Harbor Freight. Must have had HB on the brain... go figure.


 
Reply With Quote
Old 04-10-2009, 12:00 AM   #6
Azrack
Recipes 
 
Feb 2009
Mobile, Al
Posts: 26

They can be mounted mine are not I have to change setups a lot. They have a 1/4" fpt on the back center you can use to mount. And the little one is 1/4 mpt on both sides its a 90deg angle. I cant imagine why the other wouldnt work as well.

Az~

 
Reply With Quote


Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cheapest place for light DME? Irrenarzt Recipes/Ingredients 4 12-10-2012 11:50 AM
Cheapest place to buy DME Raffie General Techniques 11 10-05-2011 04:15 AM
Cheapest place to buy 5 gal kegs chrishart7 Bottling/Kegging 8 06-14-2009 11:33 AM
Anyone know of a good place to get 4/5 way secondary regulators? Stevorino Equipment/Sanitation 5 10-31-2008 02:57 PM
best/cheapest place to get a burner? bkov Equipment/Sanitation 21 08-24-2008 10:14 PM


Forum Jump