Conical Fermenter ... Which One? - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Conical Fermenter ... Which One?
Cool Brewing Giveaway - Supporting Membership Drive & Discount

Reply
 
Thread Tools
Old 04-09-2009, 12:36 AM   #1
JrZyBud
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Sep 2008
Williamstown, NJ
Posts: 50


Okay, so Im in the market for a brand new conical fermenter. I generally do 10 gallon batches ... so the question is ... which one do I get? Plastic? Stainless? What is everyones opinion of the minibrew? I think I'd rather go stainless unless someone can convince me otherwise. I don't mind the added cost so much. I was also looking at MoreBeer, but they have three different grades. Economy, Standard and Pro. Once you step into the Pro range you are talking Fermenator type pricing. Which leads me to my next question, should I go with Blichmann? Then standard or sanitary fittings? Also, Im guessing its better to have welded fittings? I need some help here ...



 
Reply With Quote
Old 04-09-2009, 12:40 AM   #2
truckmann
Mann Cave Brewer
HBT_LIFETIMESUPPORTER.png
 
truckmann's Avatar
Recipes 
 
Aug 2007
Mannford, OK
Posts: 492
Liked 11 Times on 10 Posts


If money isn't an issue I would definitely get a stainless one. I will last forever unlike a plastic one that you will have to be careful not to scratch when cleaning. I can't give much help or insight on the various options though.



 
Reply With Quote
Old 04-09-2009, 12:45 AM   #3
Aleforge
Recipes 
 
May 2007
Wentzville, Missouri
Posts: 1,231
Liked 4 Times on 4 Posts


I have a stainless one but I built it out of scrap, we have conicals laying all over at work that we don't need luckily. However if I had to actually buy one I might look into one of the plastic ones and just be super careful when cleaning. It shouldn't scratch with a soft sponge and cleaner solution and will last forever if taken care of.
__________________
PRIMARY - Irish Red
PRIMARY - Apple Bee Cider
PRIMARY - Dunkelweizen
PRIMARY - Orange Blossom Mead

"A man is but the product of his thoughts. What he thinks, he becomes." -- Mahatma Gandhi

 
Reply With Quote
Old 04-09-2009, 12:59 AM   #4
samc
Recipes 
 
Aug 2008
Portland OR
Posts: 5,373
Liked 62 Times on 58 Posts


I have tried the V-Vessel (lightbulb shaped plastic thing) and it works as long as you filter out the break material. If you don't it gets clogged. With 10 gallon batches forget I mentioned it.

I just started using a 15 gallon inductor tank, plastic and there are several threads discussing it. Other than a minor drip from the bottom fitting (grrh!), need more teflon and 7 gallons of wort say no at this point. Some complaints about the sealing of the lid from others, I think I managed to get it done by using a cut up kids giant bouncing ball as a rubber gasket. The silicone sealant I had used never fully cured and smelled like crap (vinegar). I made a stand out of a golf practice net steel cage (golf is harder to do right than beer) and amazingly I made it work. 10 gallons will easily fit, 16+ gallons is doable . Very large cover so cleaning is simple - just put it into the shower or bathtub and have at it.

After all that I can see myself eventually moving to stainless and using the inductor for a backup. The V-Vessel will eventually wind up on Craigslist. I would go Blichmann as I don't really like Morebeer. Minibrew is pointless to me if you can do the inductor tank.

 
Reply With Quote
Old 04-09-2009, 01:04 AM   #5
Boar Beer
HBT_LIFETIMESUPPORTER.png
 
Boar Beer's Avatar
Recipes 
 
Mar 2008
Central NH, NH
Posts: 531
Liked 17 Times on 14 Posts


We went with ss. Part of the thinking was that it will last forever and you can sell it for at least what you paid for it. Would you buy a used plastic one?

The Blichmann is the one we got. You need the 15 gallons on to make a 10 gallon batch
Its great and you will love the ease of making beer with it

good luck
__________________
I was married for 10 years before my wife knew I drank.
Then one day I made a mistake and came home from work sober


Minus33.com

 
Reply With Quote
Old 04-09-2009, 01:47 AM   #6
Brewers Hardware
Sponsor
HBT_SPONSOR.png
Recipes 
 
Dec 2008
Huntington Beach, CA, 92649
Posts: 454
Liked 7 Times on 6 Posts


I have 2 B3 Pro-Series 12.2G conicals. I love them from the lid down. They are well made and nicely welded. I like the large 1.5" dump valve. After using it I'm not sure how people are really using a 1/2" bottom dump as even my 1.5" gets clogged.

The lid kinda sucks though and it cannot be pressurized. If you could put the Blichmann type lid on the B3 bottom you'd have one great conical.


Reason: Added image

 
Reply With Quote
Old 04-09-2009, 07:01 AM   #7
JrZyBud
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Sep 2008
Williamstown, NJ
Posts: 50

Quote:
Originally Posted by Derrin View Post
I have 2 B3 Pro-Series 12.2G conicals. I love them from the lid down. They are well made and nicely welded. I like the large 1.5" dump valve. After using it I'm not sure how people are really using a 1/2" bottom dump as even my 1.5" gets clogged.

The lid kinda sucks though and it cannot be pressurized. If you could put the Blichmann type lid on the B3 bottom you'd have one great conical.

Very nice ... what is the copper for? To chill your fermenter? Are you using glycol?

So from what Im reading the Blichmann would be a good way to go because Im going to be paying about the same for a Pro grade MoreBeer and it can be pressurized? Can anyone help me clear up the difference between regular and sanitary tri-clamp fittings? There is a substantial price difference. Is it really worth it?

 
Reply With Quote
Old 04-09-2009, 12:27 PM   #8
Anthony_Lopez
Recipes 
 
Mar 2008
Groton, MA
Posts: 1,534
Liked 24 Times on 10 Posts


I have the 14.5 gallon blichmann. I've done 12 gallon batches in it without a problem. I got the deal of a lifetime off craigslist, so I can't really comment on pricing. The only thing I dislike about my Blichmann is how close it sits to the ground. They do have the option for leg extensions, but to me its just more $$. I have the Minibrew MLT (part of the same CL deal) and it is pretty scratched up. Its about 5 years old. Obviously that doesn't give you a review of their conicals, but it does provide some insight regarding the materials they are made from. The previous owner of my new gear took excellent care of everything, and was VERY careful when cleaning. Just my 2 cents...
__________________
I'd rather have a bottle in front of me, than a frontal lobotomy.
--Tom Waits

You can't be a real country unless you have a beer and an airline - it helps if you have some kind of a football team, or some nuclear weapons, but at the very least you need a beer.
--Frank Zappa

My Cheap and Easy Stirplate

 
Reply With Quote
Old 04-09-2009, 12:36 PM   #9
drez77
Recipes 
 
Jan 2007
Palmer MA
Posts: 400
Liked 16 Times on 14 Posts


[QUOTE=Derrin;1249682] I like the large 1.5" dump valve. After using it I'm not sure how people are really using a 1/2" bottom dump as even my 1.5" gets clogged.
QUOTE]

I wish I had a 1.5 dump valve on my 14.5 Blichman. I am going to try and removal the elbow and have the dump valve straight down to see if that helps with yeast removal. Other than that, I really like it. Before this I had a plastic 15 gallon one. I never could get a comfortable feeling with the plastic and did not like the lid and the lack of a 100% seal.

Mike

Reason: remove picture

 
Reply With Quote
Old 04-09-2009, 03:35 PM   #10
Ewalk02
Recipes 
 
Mar 2008
Kansas City, Missouri
Posts: 248
Liked 4 Times on 4 Posts


From my experience with fittings I don't see the need for the sanitary tri clamp style but I'm sure others will tell you they are amazing. I've never had a problem with my regular fittings and if I did find that I had something inside there infecting my beer I'd either replace the valve (fairly cheap) or rig up a way to have it sitting in boiling water for about 20 min to ensure I killed the little SOB's that are messing with my beer. I would think that a good soak in Oxyclean would clean them up very well after each use....just my $0.02 though.



 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
DIY Conical Fermenter Yuri_Rage Fermenters 207 11-07-2014 02:46 AM
1/2 BBL Conical Fermenter? Niederhofer Equipment/Sanitation 12 09-02-2010 04:50 AM
Conical Fermenter..... How to use? Photopilot Equipment/Sanitation 13 03-24-2010 05:28 AM
conical fermenter isac777 Equipment/Sanitation 6 06-26-2008 06:09 AM
Conical Fermenter Chris_Dog General Beer Discussion 2 01-20-2008 04:57 PM


Forum Jump