Digital Thermometer Repair - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Digital Thermometer Repair

Thread Tools
Old 04-08-2009, 06:38 PM   #1
Apr 2009
Posts: 4

I've got a Cole-Parmer digital thermometer that I stupidly managed to flame broil at the probe/cord junction. Now it's severed and I see that it has two very thin wires inside the cord that go into the SS probe. The wires severed right at the junction as I said so there's no way reconnect. This is the model:

Cole-Parmer Mini. Digital Thermometers With Remote Probe And Waterproof Remote Probe Thermometer - Cole-Parmer Catalog

At the severed end, if I touch the two wires together it reads the maximum high temp and when the wires are left apart it reads "-----C" (or maybe it was the other way around....I can't remember at the moment). If I pinch the wires between my fingers without them touching it acts like it's trying to get a reading at close to room temperature but it fluctuates wildly.

Now the question: does anyone know if this thing can be repaired/salvaged and if so how it might be done?

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Recomend a digital thermometer chrisbarnes5000 Equipment/Sanitation 64 09-11-2012 11:19 PM
Digital thermometer Cerpintine General Beer Discussion 21 04-28-2010 05:56 PM
$3 wired digital thermometer Pivzavod General Beer Discussion 15 10-07-2008 03:54 PM
digital thermometer - Is it worth it? Monk All Grain & Partial Mash Brewing 28 01-03-2008 12:42 AM
digital thermometer mrk305 All Grain & Partial Mash Brewing 11 09-05-2007 12:53 AM

Forum Jump