Coldbreak Brewing HERMS Giveaway!

HomeBrewSupply AMCYL Brew Kettle Giveaway!


Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Sources and Methods
Reply
 
Thread Tools
Old 07-19-2006, 05:35 PM   #1
BeerSlinger
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2006
Location: South West Michigan
Posts: 137
Default Sources and Methods

Hi,

My kit should arrive today and Iím looking toward getting a Kegging system in the next couple of weeks. I have been thinking about setting up a system but there is one question that still seems outstanding that I just donít have the answer. For those of you that have setup a Kegging system already, this should be an easy one. But for me, the question is a little illusive.

When you setup, I would imagine that the water, wert, and/or extract can be poured through the top and then just close and compress with the CO2. What if you want to just fill the keg with a water source, what would all of you use? Ok, Iíll be a little more specific, letís take an example:

Example #1: Beer

Letís say that you have 2 Ĺ gallons of wert and then you want to add 2 Ĺ gallons of water to even out the mix to compress. What would the water line be hooked to?




BeerSlinger is offline
 
Reply With Quote
Old 07-19-2006, 06:14 PM   #2
Todd
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2006
Location: Mechanicsburg PA
Posts: 593
Liked 1 Times on 1 Posts

Default

Quote:
Originally Posted by BeerSlinger
Hi,

My kit should arrive today and Iím looking toward getting a Kegging system in the next couple of weeks. I have been thinking about setting up a system but there is one question that still seems outstanding that I just donít have the answer. For those of you that have setup a Kegging system already, this should be an easy one. But for me, the question is a little illusive.

When you setup, I would imagine that the water, wert, and/or extract can be poured through the top and then just close and compress with the CO2. What if you want to just fill the keg with a water source, what would all of you use? Ok, Iíll be a little more specific, letís take an example:

Example #1: Beer

Letís say that you have 2 Ĺ gallons of wert and then you want to add 2 Ĺ gallons of water to even out the mix to compress. What would the water line be hooked to?


Your saying to add water to reach the 5 gallon mark right? You would just poor the water in after the wort, no lines would be hooked up. Or are you trying to dispense water from a tap?


Todd is offline
 
Reply With Quote
Old 07-19-2006, 06:27 PM   #3
olllllo
[]-O-[]
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
olllllo's Avatar
Recipes 
 
Join Date: Apr 2006
Location: Phoenix, Arizona
Posts: 13,513
Liked 134 Times on 110 Posts
Likes Given: 13

Default

Methinks he might be confusing the way soda is dispensed from concentrate with how it is used in dispensing beer.

The Corny keg is not unlike your bottle in that all of the ingredients (including water) are in the corny before natural or forced carbonation can occur.

If you are force carbing (FC), you are adding CO2 to the environment for the beer to absorb.

Once beer is carbed via natural or FC, CO2 is used to push the beer out of Corny and into your mug.
__________________
Rabbit And Coyote Schwag
Rob - Phoenix Ambassador to Milwaukee
Where did your avatar go?
Ginger Beer for Moscow Mules Bacon Vodka
Twitter

olllllo is offline
 
Reply With Quote
Old 07-19-2006, 06:34 PM   #4
BeerSlinger
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2006
Location: South West Michigan
Posts: 137
Default

Quote:
Originally Posted by Todd
Your saying to add water to reach the 5 gallon mark right? You would just poor the water in after the wort, no lines would be hooked up. Or are you trying to dispense water from a tap?
Yeah.....that's right, just make half and then mix half resulting with 5 gallons or mixing a little more in to compensate for the evaporated.....

Well, I was trying to get a feel for what others do, I was thinking about going to a tap or a tank to dispense.......with a tank, I could measure it and then just use a water purifyer to get the water.......
BeerSlinger is offline
 
Reply With Quote
Old 07-19-2006, 06:42 PM   #5
BeerSlinger
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2006
Location: South West Michigan
Posts: 137
Default

Quote:
Originally Posted by olllllo
Methinks he might be confusing the way soda is dispensed from concentrate with how it is used in dispensing beer.

The Corny keg is not unlike your bottle in that all of the ingredients (including water) are in the corny before natural or forced carbonation can occur.

If you are force carbing (FC), you are adding CO2 to the environment for the beer to absorb.

Once beer is carbed via natural or FC, CO2 is used to push the beer out of Corny and into your mug.
Confusing, no....Gearing up to do both, yes....

I would like to become almost self-sufficient.....not only would I like a better beer (or more variety) but I'm darn sick of buying this crap......I plan to get a kegging system with two liquid tanks to start and one gas with both tapsÖbut I can see myself expanding far beyond that. Iím glad all I do in my basement is laundry; because I have a feeling Iím going to need the spaceÖ

Now if I could figure out how to plant tobacco, dry it grind it and roll it, I would be all set. But I would need a lot of land for that kind of volumeÖ



BeerSlinger is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Oat ale and a couple of sources santosvega Recipes/Ingredients 6 09-18-2012 11:23 AM
heat sources? brewhymn Beginners Beer Brewing Forum 10 08-26-2009 04:30 PM
Sources in BC Canada nmcvicar Recipes/Ingredients 5 03-07-2008 04:02 AM
Hops Sources?? redneckbeagle Recipes/Ingredients 5 12-17-2007 04:17 PM
Non-HBS sources for gear? cweston Equipment/Sanitation 5 03-03-2006 10:41 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS