crazy brew day and something-gyle - Home Brew Forums
Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > crazy brew day and something-gyle

Reply
 
Thread Tools
Old 04-05-2009, 02:49 PM   #1
bendavanza
Recipes 
 
Aug 2008
Oak CLiff, TX
Posts: 2,218
Liked 18 Times on 16 Posts



My friend James and I decided to brew yesterday, and this was my first experience at stereo brewing. I made an Imperial Stout, a clone I found of Bell's Expedition. James did an Imperial Brown that's leaning to porter.
I thought that with 2 AG batches going we should do something with all this "spent" grain so he picked up 5lbs of light LME. After sparging and starting our boils, we re-sparged both MLT's and got about 5.5 gallons of 1.020 wort. We added hops from my brew, it was 1.2 oz willamette leaf, and he had a ton of hops (I don't have his recipe handy) but there was a lot of bitterness left in the hops that would have been otherwise thrown out. after it boiled about 1/2 hour, I added the LME, got it to boil again for another 15 minutes, and after tasting it, we decided to drop in an ounce of simcoe pellets at flameout.
I dunno what this beer would be classified as, but it has a nice brown ale color and smells great. We will never be able to repeat it because of the circumstance, and I thought it would be a fun experiment. It came out to 1.054, and I pitched safale-05.

My efficiency sucked at around 56%. 20.5 lbs of grain in my 10g round igloo cooler was about maxed.
I mashed with about 1qt/gallon, and wished I'd have just filled the tun to the max, it was a bit too thick. My sparge temps should have been higher, the grain bed did not get above 165. I did the double sparge. I should have collected more.
Here is the grain bill
% Weight Weight (lbs) Grain Gravity Points Color
78.7 % 16.14 American Two-row Pale 69.3 5.8
4.9 % 1.00 British Brown 3.7 14.0
3.3 % 0.67 Belgian Biscuit 2.3 3.1
1.9 % 0.38 Belgian Aromatic 1.3 1.9
1.9 % 0.38 British Chocolate 1.5 36.1
2.1 % 0.43 British Black Patent 1.3 49.5
7.3 % 1.50 Flaked Barley 5.6 0.7
20.50 85.1

Any suggestions on improving efficiency with large grain bills like this, I'm open to suggestion. I've read the sticky on efficiency but if there is high gravity methods I'm all ears.



 
Reply With Quote
Old 04-05-2009, 03:11 PM   #2
Malticulous
Recipes 
 
Aug 2008
St. George Utah
Posts: 4,143
Liked 72 Times on 57 Posts


Collect more wort and boil longer.
__________________
Everything is better with a beer.

 
Reply With Quote
Old 04-05-2009, 05:47 PM   #3
david_42
 
david_42's Avatar
Recipes 
 
Oct 2005
Willamina & Oak Grove, Oregon, USA
Posts: 25,593
Liked 151 Times on 142 Posts


Cheat. Reduce the size of your mash and use DME to boost the gravity. Packing your tun full will make getting good efficiency tough, unless you have a really good way of stirring the mash. A smaller mash will give you better efficiency and better flavor extraction from the specialty grains.

And if it looks Brown, it's a Brown.
__________________
Remember one unassailable statistic, as explained by the late, great George Carlin: "Just think of how stupid the average person is, and then realize half of them are even stupider!"

"I would like to die on Mars, just not on impact." Elon Musk

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Parti Gyle with only one brew pot. danielinva General Techniques 11 07-21-2009 09:40 PM
Crazy brew day - first lager cheezydemon All Grain & Partial Mash Brewing 5 12-02-2007 04:38 PM


Forum Jump