no airlock bubbles, but krausen - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Extract Brewing > no airlock bubbles, but krausen

Reply
 
Thread Tools
Old 07-17-2006, 03:25 PM   #1
philipc
Recipes 
 
Mar 2006
Posts: 5
Liked 1 Times on 1 Posts



I started a batch about 4 days ago. I have not seen any bubbles coming from the air lock, but I have peered in through the air lock hole and noticed a healthy looking krausen. The air lock appears to be filled properly with vodka, and I have pressed down on the lid of our pvc brewing bucket incase it did not get sealed. Any ideas about what could casuse this? Should I be concerned? I think I am going to rack to a secondary after a week and will check the gravity then to see if it has fermented fully.

Thanks,
Philip

ruination Likes This 
Reply With Quote
Old 07-17-2006, 03:29 PM   #2
cweston
 
cweston's Avatar
Recipes 
 
Feb 2006
Manhattan, KS
Posts: 2,014
Liked 18 Times on 11 Posts


It's almost surely fine: I'm guessing that the bucket or airlock has a small leak somewhere and therefore the system isn't airtight enough for the airlock to be bubbling.

I'd take a gravity reading and look to rack fairly quickly (assuming the gravity reading confirms fermentation) into a more sealed container.
__________________

Primary: none
Secondary:
Bottle conditioning: Robust Porter
Drinking: Saison Dupont clone, tripel
Coming soon: Columbus APA, Rich Red ale

 
Reply With Quote
Old 07-17-2006, 03:53 PM   #3
david_42
 
david_42's Avatar
Recipes 
 
Oct 2005
Oak Grove, Oregon, USA
Posts: 25,595
Liked 152 Times on 143 Posts


If you press lightly on the lid, does the vodka move? It doesn't take much of a leak to prevent airlock action. If you have a krausen, you have fermentation. Your plan for racking sounds fine.
__________________
Remember one unassailable statistic, as explained by the late, great George Carlin: "Just think of how stupid the average person is, and then realize half of them are even stupider!"

"I would like to die on Mars, just not on impact." Elon Musk

 
Reply With Quote
Old 07-17-2006, 03:58 PM   #4
philipc
Recipes 
 
Mar 2006
Posts: 5
Liked 1 Times on 1 Posts


Yes, If I press on the lid I can get the air lock to bubble. I think I'll just rack fairly soon after the krausen falls. This Imperial IPA smells really good. I'll let yall know how it goes.

Thanks,
Philip

 
Reply With Quote
Old 07-17-2006, 04:44 PM   #5
SteveM
Recipes 
 
Aug 2005
Philadelphia area
Posts: 1,573
Liked 13 Times on 13 Posts


You may have gotten the real active bubbling overnight after you pitched the yeast. You are almost certainly in good shape.

 
Reply With Quote
Old 07-18-2006, 06:42 AM   #6
2pugbrews
Recipes 
 
Sep 2005
Loveland, CO
Posts: 100

Quote:
Originally Posted by cweston
It's almost surely fine: I'm guessing that the bucket or airlock has a small leak somewhere and therefore the system isn't airtight enough for the airlock to be bubbling.

I'd take a gravity reading and look to rack fairly quickly (assuming the gravity reading confirms fermentation) into a more sealed container.
This pretty much mirrors my experience last week when I had an American Pale Ale in the secondary. I used Fermentis US56 yeast which when I use it blasts right off big time. This time after 2 days still no bubbles in airlock but krausen. I decided to take a SG reading and saw it had dropped from OG .047 to .040. I'm using a SSIndustries 6 gal plastic fermenter with a screw top and have for 3 or 4 of my 10 brews. Tried to tighten it by hand thinking it was leaking. Still no bubbles. Very puzzling. A day later took another SG - down to .022. Light went on. I poured some sanitizer around the edge of the cap - tiny bubbles all the way around. This time tightened cap with a big pipe wrench! Bubbles started in airlock at a rate of 80 per minute. Racked to secondary at the end of a week with a SG of .011. Lesson - relax, don't worry, have a home brew and get a new o-ring for the fermenter cap.
__________________
Primary: MT
Secondary: Belgian Wheat
Consuming: EdWort's Apfelwein,

 
Reply With Quote
Old 07-31-2006, 10:02 AM   #7
joker_x
Recipes 
 
Jul 2006
Posts: 23

I had a similar thing happen to me. It just turned out to be a leaky seal on my bucket, and when i racked to a 5 gal. glass carboy, I had the normal air lock activity. So, after that, I went and bought a 6.5 gal. glass carboy for primary, and haven't had any troubles. My leaky bucket brew isn't quite ready yet, so I don't know about contimination, but my guess is that the CO2 was escaping so there wasn't any chance for anything bad to get in.

Cheers!
-Rick

Primary: Honey Amber Ale
Secondary #1: Octane IPA
Secondary #2: Oatmeal Stout
Bottled/drinking: American Amber Ale

 
Reply With Quote
Old 08-01-2006, 01:23 AM   #8
pariah
Recipes 
 
May 2006
OKC
Posts: 97

I've done five brews, only two have bubbled. They have all turned out excellent (except one, but that is a different story). Don't worry about it, your beer will be fine!

 
Reply With Quote
Old 08-01-2006, 04:39 AM   #9
ga1ba2
Recipes 
 
Jun 2006
Posts: 25

My name is Gary and this is my first post. I have brewed in the past but havn't in about 12 years. I won't say how old I am but I used to brew with Blue Ribbon Extract and bakers yeast I started brewing again and my first has been in the bottles almost a week (NB Irish Ale) and a Nukey Brown in the primary 3 days old. This forum is really great. I maybe should have posted this some place else but it is in reference to sealing the top on a bucket type primary fermenter. I have found if you use several pieces of plastic wrap folded several times into strips and placed around the top edge and then bang the lid on you get a very good seal. The plastic wrap can be sanitized first


 
Reply With Quote
Old 08-01-2006, 05:43 AM   #10
pariah
Recipes 
 
May 2006
OKC
Posts: 97

Quote:
Originally Posted by ga1ba2
My name is Gary and this is my first post. I have brewed in the past but havn't in about 12 years. I won't say how old I am but I used to brew with Blue Ribbon Extract and bakers yeast I started brewing again and my first has been in the bottles almost a week (NB Irish Ale) and a Nukey Brown in the primary 3 days old. This forum is really great. I maybe should have posted this some place else but it is in reference to sealing the top on a bucket type primary fermenter. I have found if you use several pieces of plastic wrap folded several times into strips and placed around the top edge and then bang the lid on you get a very good seal. The plastic wrap can be sanitized first
Meh, I just consider it an open fermentation. Fancy!

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Bubbles but no Krausen eschatz All Grain & Partial Mash Brewing 16 11-17-2015 07:27 PM
No bubbles for 3 days... should i take the lid off and check for krausen? GinAndCoffee Beginners Beer Brewing Forum 9 11-02-2009 07:46 PM
No bubbles in overflow - plenty of krausen Zorbarose Beginners Beer Brewing Forum 5 02-17-2009 02:19 PM
Plenty of Krausen but no bubbles. PavlovsCat Beginners Beer Brewing Forum 2 02-16-2009 12:20 AM
No bubbles or Krausen in the secondary? hwangnyc General Techniques 7 01-02-2007 03:11 PM


Forum Jump