Keezer Tower - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Keezer Tower

Reply
 
Thread Tools
Old 04-02-2009, 01:44 AM   #1
dutch101st
 
dutch101st's Avatar
Recipes 
 
Mar 2009
Roseville, CA, California
Posts: 227
Liked 1 Times on 1 Posts



I am going to mounting a 2 tap tower on a freezer; is there any issue with this? In terms of some sort of support underneath the sheet metal of the lid?
__________________
Kegged: AIR
Primary: AIR
Secondary:
Secondary:

On Tap: NADA
Bottled: Store baught swill

Atomic Robot Brewing- Beware the Robot Uprising!!

http://robotarmageddon.com/wp-conten...t-Uprising.jpg

 
Reply With Quote
Old 04-02-2009, 01:46 AM   #2
McKBrew
 
McKBrew's Avatar
Recipes 
 
Oct 2006
Hayden, Idaho
Posts: 8,204
Liked 35 Times on 30 Posts


Most of what I've read here at HBT recommends using a piece of wood underneath to screw the tower into. A 3/4" piece of plywood or pine should work nicely.
__________________
Make Beer, Not War.

 
Reply With Quote
Old 04-02-2009, 07:38 PM   #3
MoRoToRiUm
Recipes 
 
Jun 2008
Posts: 1,389
Liked 5 Times on 4 Posts


+1 Just like a mini fridge- you don't want a wobbly tower! Bigger the piece of wood, the more stable your tower will be.
__________________
Broken Face Brewery
Est. 2008

 
Reply With Quote
Old 04-03-2009, 03:30 PM   #4
RockfordWhite
Recipes 
 
Dec 2007
Posts: 449
Liked 8 Times on 7 Posts


yeah, i just installed one, tried it w/o the wood, it was way too wobbly, so i got a 1x10 mounted it, now it's nice and sturdy... it was kinda a pita to cut away the insulation but whatever...

 
Reply With Quote
Old 04-03-2009, 04:04 PM   #5
LIVETOBREW
Recipes 
 
Dec 2008
Belmont, Ca
Posts: 29

what kind of freezer are you using? My keezer is an MC 7.2, I have 2 towers both two faucet mounted on the lid, the only thing i did was add a small 10"x10" piece of lexan over the hard plastic insulation on the inside of the lid, used long bolts with washers and nuts, then trimmed the excess bolt flush with the nut, towers dont budge at all...... plenty of clearance inside still.....
__________________
Fermenting: Squeeze my lemons blonde, Belgian wit, Lawnmower ale, Barley wine
Secondary: Chocolate porter, kolsch, lawnmower ale, Orange Honey Hefewiesen
Bottled: Rasberry wheat, Whopper Stout
Drinking: Hopzilla(wow), Gumball Hefewiesen, Blue Moon Clone, Leffe Clone

 
Reply With Quote
Old 04-05-2009, 02:20 AM   #6
NoneRequired
Recipes 
 
Dec 2007
Metro Motor-D
Posts: 19
Liked 1 Times on 1 Posts


That was one of the concerns I had prior to my keezer build. The other is wall clearance when opening the keezer. Check out my keezer build to see how I avoided both of those issues.
http://www.homebrewtalk.com/f35/show...ml#post1240730

 
Reply With Quote
Old 04-05-2009, 02:42 AM   #7
dutch101st
 
dutch101st's Avatar
Recipes 
 
Mar 2009
Roseville, CA, California
Posts: 227
Liked 1 Times on 1 Posts


Hehehee...wish I would have seen how you did yours before I did mine..oh well. Are you going to get enough cold air into the tower with your design?
__________________
Kegged: AIR
Primary: AIR
Secondary:
Secondary:

On Tap: NADA
Bottled: Store baught swill

Atomic Robot Brewing- Beware the Robot Uprising!!

http://robotarmageddon.com/wp-conten...t-Uprising.jpg

 
Reply With Quote
Old 04-05-2009, 03:05 AM   #8
NoneRequired
Recipes 
 
Dec 2007
Metro Motor-D
Posts: 19
Liked 1 Times on 1 Posts


Quote:
Originally Posted by dutch101st View Post
Hehehee...wish I would have seen how you did yours before I did mine..oh well. Are you going to get enough cold air into the tower with your design?
I just finished mine this evening and don't have anything in it yet (70 schilling Scotch Ale is in secondary) but I figure there is plenty of room inside the little shelf if I need to add a fan. The tower is fairly cold to the touch though so I'm not expecting any issue... I could definitely be wrong though, this is my first keezer build.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Converting a Single Tower to a Dual Tower?!? nunzio42 Kegerators & Keezers 5 09-12-2013 05:43 AM
Keezer Collar v. Tower Sky7 Kegerators & Keezers 16 07-09-2011 01:43 AM
Keezer with tower, suggestions for the 'bar top' ? Kelly. Kegerators & Keezers 15 08-08-2010 05:25 PM
Split Door Tower Keezer. dantodd Kegerators & Keezers 18 09-09-2009 05:10 PM
Keezer…with tower taps? LandoCalrissian Kegerators & Keezers 9 08-07-2009 06:55 AM


Forum Jump