MLT Decision - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > MLT Decision

Reply
 
Thread Tools
Old 04-01-2009, 07:07 AM   #1
Myrdhyn
Recipes 
 
Feb 2009
North Alabama
Posts: 303
Liked 1 Times on 1 Posts



Well, it seems I've been bitten by the AG bug. I'm starting to gather my equipment now. I plan on picking up a turkey fryer/propane burner for boiling, building an immersion chiller for cooling, and building a MLT out of a cooler. The problem is I can't decide which cooler to go with.

I've got it narrowed down to two, possibly three, options. The main two considerations are:

5 gallon Igloo round beverage cooler - Available for $20

-OR-

12 gallon Cube type cooler - Available for $25

-OR-

The third potential option is that I've heard rumors of a 7gallon round beverage cooler (haven't checked all the Walmarts in town yet) that also has my interest piqued and might shoot for a happy medium between the two if I can find it.

I'm not forseeing going to 10g batches any time soon, but I would like flexibility to brew a wide range of styles/wide range of SGs. I'd say I'll probably average in the 1.050-1.070 range, but could go lower for some session beers or higher for some barleywines and the like. I would just go with the 12gallon cooler, but grain bed-depth has me concerned on <=1.050 batches. So I guess what it boils down to is, if I buy the 12g cooler, am I going to screw myself if I try to brew a 60/- or something like that? Or should I just quit stressing, buy the 12g I'm leaning towards, and attack it with tools/hardware/beer?

And before someone asks, yes I've done many searches, and I've spent hours upon hours reading here and elsewhere (including both Papazian and Palmer) trying to decide this.
__________________
Left tap: Myrd's IPA
Right tap: Heffeweizen
Kegged: Blimey's ESB, Apfelwein, Ed's Haus Pale Ale
Fermenting: Air, but soon to be Ode-to-Arthur and more Apfelwein.


 
Reply With Quote
Old 04-01-2009, 08:03 AM   #2
Mustangj
 
Mustangj's Avatar
Recipes 
 
Oct 2006
Royal Oak, MI Michigan
Posts: 1,318
Liked 3 Times on 3 Posts


Go with the 12 gallon.

Just my 2 cents.
__________________
"If my mother was tied up and held ransom, I might think about making a light beer."Greg Koch
Stone Brewing

Michigan Mashers
http://www.homebrewtalk.com/groups/michigan-mashers/

 
Reply With Quote
Old 04-01-2009, 03:26 PM   #3
The Pol
Recipes 
 
Feb 2007
Posts: 11,454
Liked 97 Times on 82 Posts


The 7 gallon beverage cooler costs just as much in most stores as the 10 gallon.

You will regret getting the 5 gallon, they are very small.

So, Id recommend the 12 gallon with a 1/2" ball valve fitting.

But, whatttaaa I know??? Do what you like

 
Reply With Quote
Old 04-01-2009, 03:46 PM   #4
ajwillys
 
ajwillys's Avatar
Recipes 
 
May 2008
Holly Springs, NC
Posts: 1,296
Liked 26 Times on 24 Posts


Not the 5!! 7 would get you 15 pounds of grain at 1.5 quarts/pound ratio so it would work but you won't be able to make much of anything with the word 'imperial' in front of it.

I'd go 10 or larger...

 
Reply With Quote
Old 04-01-2009, 03:49 PM   #5
tipicreeper
Recipes 
 
Dec 2008
Arizona
Posts: 191
Liked 4 Times on 2 Posts


+1 on the 10g.
I bought two 5's about 3 months ago. I have already grown out of them with double & triple batch sparging.
Cheers
-David

 
Reply With Quote
Old 04-01-2009, 05:06 PM   #6
Myrdhyn
Recipes 
 
Feb 2009
North Alabama
Posts: 303
Liked 1 Times on 1 Posts


So, I guess the real question is, will I have any problems with grain bed depth in a 48qt cooler with a grain bill of say 6-8lbs for some smaller beers?
__________________
Left tap: Myrd's IPA
Right tap: Heffeweizen
Kegged: Blimey's ESB, Apfelwein, Ed's Haus Pale Ale
Fermenting: Air, but soon to be Ode-to-Arthur and more Apfelwein.

 
Reply With Quote
Old 04-01-2009, 05:10 PM   #7
McKBrew
 
McKBrew's Avatar
Recipes 
 
Oct 2006
Hayden, Idaho
Posts: 8,204
Liked 35 Times on 30 Posts


Quote:
Originally Posted by Myrdhyn View Post
So, I guess the real question is, will I have any problems with grain bed depth in a 48qt cooler with a grain bill of say 6-8lbs for some smaller beers?
No

++++++++++
__________________
Make Beer, Not War.

 
Reply With Quote
Old 04-01-2009, 06:11 PM   #8
rico567
 
rico567's Avatar
Recipes 
 
Apr 2008
Central IL
Posts: 3,018
Liked 87 Times on 81 Posts


I'm also on the verge of doing the cooler MLT conversion. It's my understanding from the sources I've read that getting anything below a 10 gal. cooler for 5 gal. batches would be a mistake. Right now I'm focused on the 10 gal. Rubbermaid, but the price of the 12 gal. Igloo cube seems attractive.....
__________________
“Malt does more than Milton can / To justify God’s ways to man”

-A. E. Housman (1859–1936). A Shropshire Lad , 1896.

 
Reply With Quote
Old 04-01-2009, 06:50 PM   #9
Myrdhyn
Recipes 
 
Feb 2009
North Alabama
Posts: 303
Liked 1 Times on 1 Posts


That 12gal Cube @ $25 is at Big Lots, so I don't know how much luck you will have finding it. Definitely worth a look if you have one in town though.

I think I've pretty much decided that's what I"m going with. It doesn't come with a spout/spigot but it has a place where one would go and a small indention/slope down to it, so I can drill my own custom hole and go with under mounted drain tube as in this thread:

http://www.homebrewtalk.com/f51/my-s...ter-tun-92724/

Probably going to shamelessly steal from his design just scaled up larger (sans-fly sparge manifold for now) if I go with this cooler.
__________________
Left tap: Myrd's IPA
Right tap: Heffeweizen
Kegged: Blimey's ESB, Apfelwein, Ed's Haus Pale Ale
Fermenting: Air, but soon to be Ode-to-Arthur and more Apfelwein.

 
Reply With Quote
Old 04-01-2009, 07:35 PM   #10
Catt22
Recipes 
 
Jan 2009
Posts: 4,998
Liked 70 Times on 63 Posts


50 quart Igloo Ice Cube Marine. Here's a cut sheet on one, but I would bet you could find them cheaper at Dick's or Wally World:

Ice Cube 50 Marine Ice Chest

A drain valve is very easy to install on the Ice Cube. You will appreciate the 12 gal capacity and that should take you up to the 1.070 gravity limit unless you happen to get extraordinary efficiency. Don't worry about the grain bed depth. Some of the experts suggest that a thinner grain bed is better than a deep one. Opinions will vary on this and there is probably an optimum depth. A thinner grain bed is less likely to compact and hinder the sparge or recirc. That makes a thinner grainbed attractive for me, but my grainbed depth is dictated by the size of my mash tun. I have a ten gallon MT and I'm looking to upgrade to a 60 quart one soon. I like to brew 11-12 gallons at a time and for higher gravity beers the 10 gallon MT just doesn't have the capcity I need. You may not see ten gallon batches in your future, but the rest of us do!

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Help me make a decision toddrod Equipment/Sanitation 7 08-19-2008 01:34 AM
please help with yeast decision kjones Recipes/Ingredients 16 07-29-2008 08:07 PM
oktoberfest decision... BrewskiBro General Techniques 16 06-15-2008 06:55 PM
My decision Exo Equipment/Sanitation 1 09-03-2006 07:19 AM
Decision Time - need some help psymn Equipment/Sanitation 11 05-31-2006 01:30 AM


Forum Jump