Tippy Dump on a Brutus - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > Tippy Dump on a Brutus

Reply
 
Thread Tools
Old 03-27-2009, 11:28 PM   #1
Brickhouse
Recipes 
 
Mar 2008
Modesto
Posts: 34


I'm trying to figure out how to design a tippy dump for my yet to be built Brutus. I need advice on how to solve a few problems:

(1) How do you determine the position of the tippy and the swing angle of the mashtun?

(2) Is it a problem for the mash tun to be higher than (i.e. not sit on) the sculpture?

(3) What do you think of having the tippy dump lock in the dump position to remove the grain (is this necessary?) and how would you do it?

(4) Would a single 'stick' of 2" be enough support for the tippy, or do I need a triangle like B3's design?

(5) Where and how would you attach a grain shute?

Thank you for your advice!

 
Reply With Quote
Old 03-28-2009, 12:32 AM   #2
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 23,201
Liked 1658 Times on 1071 Posts


I made my stand with tippy dumps for the MLT and BK and to be honest, it doesn't have all that much utility. I ended up not ever using it. I just suck the spend grain and hops out of them with my shop vac. Scrub, rinse, and suck that out too.
__________________
Welcome to BrewHardware.com. I love you.
BIAB Large Mesh False Bottoms and SS HERMS COILS are IN!!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

 
Reply With Quote
Old 03-28-2009, 02:32 AM   #3
Lonnie Mac
Recipes 
 
Nov 2006
Bacliff, TX
Posts: 304
Liked 9 Times on 7 Posts


I can appreciate you wanting a tippy dump my friend... I thought long and hard about this in my original Brutus design. It indeed must have to be designed around (just above) the max CG of a full mash tun and NOT something that tips the whole tun over the edge... Not many systems are designed to hang that much weight over the edge without compromising the CG of the system itself and tipping the whole dang thing over...

In the end though, I felt that it was just not a necessary feature to expend the energy and funds on... A very cool feature, indeed I would agree if coolness is the factor... It's just too easy for me to yank the mash tun off and dump the whole thing into a trash can!
__________________
Lonnie Mac...
President of the Brutus Ten cult!

 
Reply With Quote
Old 03-28-2009, 02:43 AM   #4
ClaudiusB
Recipes 
 
Dec 2007
El Paso, Texas
Posts: 1,350
Liked 99 Times on 76 Posts


Quote:
I'm trying to figure out how to design a tippy dump for my yet to be built Brutus. I need advice on how to solve a few problems:
I don't have a Brutus, my small mash tun has a tippy dump and the large one has man hole.

Removing the tun is easy.
The tun hangs by the black Delrin material only.







Tippy dump stop


Quote:
I made my stand with tippy dumps for the MLT and BK and to be honest, it doesn't have all that much utility. I ended up not ever using it.
I am currently working on a different removal system, using compressed air.

Cheers,
ClaudiusB

 
Reply With Quote
Old 03-28-2009, 03:13 AM   #5
Lonnie Mac
Recipes 
 
Nov 2006
Bacliff, TX
Posts: 304
Liked 9 Times on 7 Posts


Indeed ClaudiusB my friend...

If it were me, the single 2" tubing is plenty to support a system like this on my Brutus design. I'd have it off-set just a tad, and simply lift the mash tun up into the saddles and dump... This is what I had in mind, but it just was not in the final cards...

Say my friend, you and I are too close to not meet some weekend on a brew trip and have a dang dang beer or two! I have kept up with you for a long time...
__________________
Lonnie Mac...
President of the Brutus Ten cult!

 
Reply With Quote
Old 03-28-2009, 04:39 PM   #6
ClaudiusB
Recipes 
 
Dec 2007
El Paso, Texas
Posts: 1,350
Liked 99 Times on 76 Posts


Quote:
Lonnie Macwrote: Say my friend, you and I are too close to not meet some weekend on a brew trip and have a dang dang beer or two!
I love to meet the brain behind the famous BRUTUS system.
Gives me a chance to tell the hole German brewing community
" I know that guy"

Cheers,
ClaudiusB

 
Reply With Quote
Old 03-30-2009, 12:36 AM   #7
ClaudiusB
Recipes 
 
Dec 2007
El Paso, Texas
Posts: 1,350
Liked 99 Times on 76 Posts


Where did reply #6 & 7 go?

Lonnie Mac did you change your mind?


Cheers,
ClaudiusB

 
Reply With Quote
Old 03-30-2009, 01:05 AM   #8
beerthirty
big beers turn my gears
HBT_LIFETIMESUPPORTER.png
 
beerthirty's Avatar
Recipes 
 
May 2008
Podunk, VA. Not far from the NC line.
Posts: 2,589
Liked 32 Times on 14 Posts


I went with Bobby's idea. My back doesn't like bending over long enough to clean out the tuns on the ground. I haven't used it yet but I did test the cleaning phase. A trash can under the edge to dump the grains into and a bucket to catch the final grain rinse water. I also scrubbed the BK. It seemed to work pretty good.
__________________
Quote:
Originally Posted by the_bird View Post
"I've got a fever... and the only prescription is, MORE CARBOYS!"
primary- Tangerine Dream, SWMBO slayer,
serving- amber ale hop experiment #6, Roggenbier, apfelwine
planning- Cru?
conditioning- 9/9/09 barleywine
Drink water?... Never, fish fornicate in it.--- W.C. Fields
Most problems can be solved with the proper application of force.

 
Reply With Quote
Old 03-30-2009, 01:09 AM   #9
Lonnie Mac
Recipes 
 
Nov 2006
Bacliff, TX
Posts: 304
Liked 9 Times on 7 Posts


Quote:
Originally Posted by beerthirty View Post
I went with Bobby's idea. My back doesn't like bending over long enough to clean out the tuns on the ground. I haven't used it yet but I did test the cleaning phase. A trash can under the edge to dump the grains into and a bucket to catch the final grain rinse water. I also scrubbed the BK. It seemed to work pretty good.
This is a great idea, and one I had played with a long time ago. What I was alluding to was that this idea could never be used on Brutus (or just about any single tier system) as it would tip the whole system over on it's face!
__________________
Lonnie Mac...
President of the Brutus Ten cult!

 
Reply With Quote
Old 03-30-2009, 01:23 AM   #10
beerthirty
big beers turn my gears
HBT_LIFETIMESUPPORTER.png
 
beerthirty's Avatar
Recipes 
 
May 2008
Podunk, VA. Not far from the NC line.
Posts: 2,589
Liked 32 Times on 14 Posts


Unless you tipped to the side like bobby's original plan did.
__________________
Quote:
Originally Posted by the_bird View Post
"I've got a fever... and the only prescription is, MORE CARBOYS!"
primary- Tangerine Dream, SWMBO slayer,
serving- amber ale hop experiment #6, Roggenbier, apfelwine
planning- Cru?
conditioning- 9/9/09 barleywine
Drink water?... Never, fish fornicate in it.--- W.C. Fields
Most problems can be solved with the proper application of force.

 
Reply With Quote


Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Infected, to dump or not to dump??? skeeordye11 General Beer Discussion 14 07-17-2009 04:06 PM
To dump or not to dump... egurney Beginners Beer Brewing Forum 12 06-10-2008 06:19 PM
designing my tippy dump Jim Karr Brew Stands 4 05-30-2008 02:26 PM
Tippy Dump? Yorg Equipment/Sanitation 1 03-07-2008 03:08 PM
Tippy MLT Plans? HenryHill Equipment/Sanitation 5 11-14-2007 10:49 PM


Forum Jump