starting brew rig build. need specs and measurements - Home Brew Forums
Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > starting brew rig build. need specs and measurements
Cool Brewing Corny 5G & Mini Giveaway

Reply
 
Thread Tools
Old 03-27-2009, 12:09 AM   #1
jonp9576
Recipes 
 
Join Date: Aug 2008
Location: Lansdale, PA
Posts: 1,304
Liked 3 Times on 3 Posts
Likes Given: 1


so i have been doing some research about the kind of rig i want to build.

i am thinking i want a 3 tiered one along the lines of this setup.
http://www.the-sparkmans.net/Photo%2...s/DSCN2508.JPG

my question is what size steel should i buy. is 2" too big?

also, i was wondering about making the bottom tier able to move up and down so i can have an overall lower height but also raise up my BK to gravity feed into my fermenter.

much like this one
http://i113.photobucket.com/albums/n...d/IMG_0147.jpg


as far as wheels, i want to be able to take off my keggles and have it be kind of light. i plan on putting 2 wheels on one end and tilting it like a dollie to move it around.

thoughts, ideas, measurements for burner stand sizes, steel sizes?

also, if i use 2" box, will a piece of 3" be good for the sleeve for the moving BK stand or should i use something like 2.5"


__________________
Taps down for kegerator rebuild

"Just remember that the real enemy here are those wine drinking pussies."-BierMuncher

 
Reply With Quote
Old 03-27-2009, 12:16 AM   #2
jonp9576
Recipes 
 
Join Date: Aug 2008
Location: Lansdale, PA
Posts: 1,304
Liked 3 Times on 3 Posts
Likes Given: 1


oh, and what kind of paint is everyone using? just high temp grill paint? or doesnt it really matter except for where the burners are


__________________
Taps down for kegerator rebuild

"Just remember that the real enemy here are those wine drinking pussies."-BierMuncher

 
Reply With Quote
Old 03-27-2009, 12:57 AM   #3
jonp9576
Recipes 
 
Join Date: Aug 2008
Location: Lansdale, PA
Posts: 1,304
Liked 3 Times on 3 Posts
Likes Given: 1


dam, nothing
__________________
Taps down for kegerator rebuild

"Just remember that the real enemy here are those wine drinking pussies."-BierMuncher

 
Reply With Quote
Old 03-27-2009, 01:42 AM   #4
rickbyte
Recipes 
 
Join Date: Nov 2008
Location: Lewisville, Texas
Posts: 8

Automotive header Paint is good to 1200 degrees and can be had in many colors.

 
Reply With Quote
Old 03-27-2009, 02:29 AM   #5
jonp9576
Recipes 
 
Join Date: Aug 2008
Location: Lansdale, PA
Posts: 1,304
Liked 3 Times on 3 Posts
Likes Given: 1


nice. i'll look for that. pep boys have it? or do i need a speed shop?
__________________
Taps down for kegerator rebuild

"Just remember that the real enemy here are those wine drinking pussies."-BierMuncher

 
Reply With Quote
Old 03-27-2009, 02:52 AM   #6
MikeinAK
Recipes 
 
Join Date: Jan 2009
Posts: 137
Liked 1 Times on 1 Posts


Quote:
Originally Posted by jonp9576 View Post
nice. i'll look for that. pep boys have it? or do i need a speed shop?

I just got done building my 3 tier rig about a month and a half ago. I used a touch over 2.25" square tubing for the main column and base and a little over an 1.5" tubing for the keggle bases. I got a great deal on some SS metric tubing, so I'd think 2" would be plenty strong. As for the sleeve I'd make it what ever the 2" fits in snuggly. As for paint, you can find header paint at any autoparts store. I think they call it ceramic header paint.

Hope that helps,

Mike

 
Reply With Quote
Old 03-27-2009, 11:50 AM   #7
jonp9576
Recipes 
 
Join Date: Aug 2008
Location: Lansdale, PA
Posts: 1,304
Liked 3 Times on 3 Posts
Likes Given: 1


great thanks. i guess i dont need paint yet, but it wont hurt to look around for it. i am picking up my steel today. i forget how long the lengths are. i hope i only need one.
__________________
Taps down for kegerator rebuild

"Just remember that the real enemy here are those wine drinking pussies."-BierMuncher

 
Reply With Quote
Old 03-27-2009, 12:16 PM   #8
Lil' Sparky
Cowboys EAC
HBT_LIFETIMESUPPORTER.png
 
Lil' Sparky's Avatar
Recipes 
 
Join Date: Feb 2006
Location: Honolulu, HI
Posts: 3,952
Liked 69 Times on 44 Posts


That was my stand in the first link. I think you might want to stick with something heavy duty (2x2-ish) for the mast, but like Mike said, the forks to set the kegs on and the feet certainly don't have to be that heavy. I used 2x2 all around because it was scrap steel I got for free.

The dolly idea is interesting, but 4 casters were so easy, and it made it possible to still move it a little, even with the kegs on there. I think the 4 casters method is a little more versatile, and also made the weight of the 2x2 steel a non-issue.

The BK on a hoist is also an interesting idea, and I considered doing something like that, but for me the extra work didn't seem worth it. Before I bought my pump, I used a wort wizard (actually it was a python acquarium vacuum) to pump the wort through my CFC and into the carboy. Once I bought my pump, I realized it had many more uses, including recirculation while I direct-fire the MLT, moving all liquids, etc., so I built a single tier, which I really like a lot more.

What measurements specifically are you looking for?
__________________
Quote:
Originally Posted by duffman2 View Post
I dub this beer the Double Slutty Triple Nutty Bodacious Booty Brunette!

 
Reply With Quote
Old 03-27-2009, 12:20 PM   #9
Lil' Sparky
Cowboys EAC
HBT_LIFETIMESUPPORTER.png
 
Lil' Sparky's Avatar
Recipes 
 
Join Date: Feb 2006
Location: Honolulu, HI
Posts: 3,952
Liked 69 Times on 44 Posts


Oh, I also helped someone else build one like that. We decided to use hard plumbing for the burners. I think it's a much cleaner look.

__________________
Quote:
Originally Posted by duffman2 View Post
I dub this beer the Double Slutty Triple Nutty Bodacious Booty Brunette!

 
Reply With Quote
Old 03-27-2009, 08:10 PM   #10
jonp9576
Recipes 
 
Join Date: Aug 2008
Location: Lansdale, PA
Posts: 1,304
Liked 3 Times on 3 Posts
Likes Given: 1


sparky, i love the look of the hard plumbing. i plan to use that for mine. i am going to make the BK burner stationary and just have the stand for the kettle move away from the burner to give me the height i want to feed into my fermenter.

today i bought a length of 2x2 steel and a length of 1.5x1.5. i think they are 24' each. i should have plenty of material.

the measurements i was looking for was the distance btwn the legs, the lengh of the legs, and the overall height.

the reason i want to go with the dolly form for the wheels is that where i'll be using it and where i'll be storing it wil be a good distance from each other and there is some pretty rough ground in between. i just figured 4 wheels and i would be pushing it over all the time.


__________________
Taps down for kegerator rebuild

"Just remember that the real enemy here are those wine drinking pussies."-BierMuncher

 
Reply With Quote
Reply

Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Price to build the Brew Magic Brew system! vanwolfhausen Equipment/Sanitation 14 11-24-2010 06:01 PM
Brew Stand - Build yourself or get someone else to build? Stevorino Equipment/Sanitation 36 12-23-2009 05:53 PM
Need Brew Stand Specs 1234 Brew Stands 0 09-14-2009 02:17 AM
Starting HERMS Build rj_hockey Brew Stands 4 02-02-2009 07:22 PM
Starting my keezer build tomorrow, a collar question Chello Bottling/Kegging 3 12-29-2007 03:27 PM


Forum Jump