diy electric submersible heater - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > diy electric submersible heater

Reply
 
Thread Tools
Old 03-16-2009, 11:38 PM   #1
blackwaterbrewer
 
blackwaterbrewer's Avatar
Recipes 
 
Dec 2008
virginia beach
Posts: 704
Liked 7 Times on 6 Posts



this may be a rerun, but i couldn't find anything on it. i built one this weekend in about 40 minutes. it wil bring 7 gallons of water from 65-180 in about 60 minutes. very useful and cost about $35 of my dollars.

http://www.cedarcreeknetworks.com/heatstick.htm
__________________
it's not the blood you've spilled that gets you what you want, its the blood you share. friends, family, community: these are the most valuable things a man can have.

Primary-
Lagering-
Primary-
secondary-
secondary-
on tap- lemongrass kolsch
on tap- stout
on tap- small mead
bottle-sweet mead
bottle-


 
Reply With Quote
Old 03-17-2009, 12:07 AM   #2
yorkbrew
 
yorkbrew's Avatar
Recipes 
 
Sep 2007
Bellingham, WA
Posts: 114


This link comes up a lot in the context of apartment brewing. I brew AG in an apartment so I had to make one of those. I found that one of the problems with the design was that in my pot I had to have at least 5 gal to keep the heating element submerged. I rebuilt it using a curved pipe so the element stays along the bottom of the pot more. This way I can heat any volume of water that I'll need for mashing/sparging.

I'd love to have an outdoor setup but with my current living situation that just isn't feasible.

 
Reply With Quote
Old 03-17-2009, 02:53 AM   #3
wilserbrewer
BIAB Expert Tailor
HBT_SPONSOR.png
 
wilserbrewer's Avatar
Recipes 
 
May 2007
Jersey Shore, Jersey
Posts: 9,436
Liked 1321 Times on 1013 Posts


I use heatsticks quite a bit...instead of the #6 ground lug, I prefer to run the ground through the large nut on the element fitting. Sorry can't fine the link?

 
Reply With Quote
Old 03-18-2009, 05:38 PM   #4
HSM
 
HSM's Avatar
Recipes 
 
Jan 2009
McMurray, PA
Posts: 460
Liked 5 Times on 5 Posts


Here's another build I found:

alfter.us - Heatstick Construction

Some elements too:

Electric water heater elements, thermostats and faq's - PlumbingSupply.com

I definitely like the J shape better and will be building one to suplement my propane and to heat sparge water.

Any concerns with the JB weld coming in contact with hot liquid?

 
Reply With Quote
Old 03-21-2009, 10:51 AM   #5
HomebrewJeff
Recipes 
 
Jan 2009
Lincoln Park, MI
Posts: 299
Liked 1 Times on 1 Posts


Quote:
Originally Posted by HSM View Post
Any concerns with the JB weld coming in contact with hot liquid?
I would think you want to avoid contact with JB Weld and liquid, especially brewing water. However, if I'm not mistaken, the JB weld is used to pot the electrical connections, so they would be outside of the kettle. The jb weld shouldn't be contacting any liquid.

 
Reply With Quote
Old 03-23-2009, 12:19 AM   #6
blackwaterbrewer
 
blackwaterbrewer's Avatar
Recipes 
 
Dec 2008
virginia beach
Posts: 704
Liked 7 Times on 6 Posts


the JB weld i used is rated for 300 degrees. i am, however, concerned about chemical wierdness.
__________________
it's not the blood you've spilled that gets you what you want, its the blood you share. friends, family, community: these are the most valuable things a man can have.

Primary-
Lagering-
Primary-
secondary-
secondary-
on tap- lemongrass kolsch
on tap- stout
on tap- small mead
bottle-sweet mead
bottle-

 
Reply With Quote
Old 03-23-2009, 02:46 PM   #7
aubrey
Recipes 
 
Dec 2008
Acworth, Ga
Posts: 241
Liked 2 Times on 1 Posts


JBWeld is fine for this application, it is non-toxic. They also have a product specifically intended to be fully immersed and used in potable water supplies - waterweld i think they call it.

Alumilite on the other hand is extremely toxic in liquid form. I don't know about after it cures, but it has the potential to leech chemicals into your brew while boiling. 212*F is not that far from its max of 250*F and after 2 hours steeping in hot water (its not supposed to be used in a moist environment much less submerged) it will probably begin to break down and release some of its chemicals. I wouldn't use it, and I imagine if you call them and ask them if its safe to be used they would tell you you're nuts.

Here's the MSDS (pdf link):
http://www.alumilite.com/MSDS/Alumilite%20Regular.pdf
__________________
Elkins Creek Brewing Company
On Deck:
Primary: Air
Secondary: Bavarian Hefewizen (extract)
Bottle: Blue Moon clone, Sam Adams Boston Ale Clone, Christmas Chocolate Stout (All Grain)
Keg: AHS West Coast Pale Ale, BierMuncher's Centennial Blonde (All Grain)

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Electric Heater from Williams Brewing - User report Brewing Clamper Equipment/Sanitation 29 11-30-2011 06:40 PM
Electric Brew Heater? Cpt_Kirks Equipment/Sanitation 6 05-10-2010 10:22 PM
Submersible Thermometer axr Equipment/Sanitation 7 06-01-2009 01:25 AM
Is thermometer submersible? RockfordWhite Equipment/Sanitation 4 02-08-2008 11:42 PM
electric heater??? Raffie General Techniques 8 04-24-2007 11:58 PM


Forum Jump