Coldbreak Brewing HERMS Giveaway!

HomeBrewSupply AMCYL Brew Kettle Giveaway!


Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > Herms Coil Help
Reply
 
Thread Tools
Old 03-12-2009, 08:59 PM   #1
rj_hockey
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2007
Location: Toledo, OH
Posts: 81
Default Herms Coil Help

I'm trying to make another herms coil for a friend and have already coiled the 25 foot roll of copper with no problem around a cornie, now comes the hard part.. The last time I did one I used a 1/2 bender to make the 90 degree turns, the issue arises that at the time I had one.. It seems to have walked off and I was wondering if anyone had another way to make the 90 degree bends required with out kniking the pipe like i've done so many wasteful times.


__________________
Primary: Pumpkin Pie
Secondary: Woods Pail Cider
Secondary: 50/50
On Tap: Woods Pale Ale, Double Citrus IPA, Blitzen Ale
rj_hockey is offline
 
Reply With Quote
Old 03-13-2009, 01:48 AM   #2
TommyBoy
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2008
Location: Mentor-on-the-Lake, Ohio
Posts: 546
Liked 2 Times on 2 Posts

Default

Spring benders are cheap. Expecially if you can get just one size. I wouldn't touch it until you get one. I have screwed up just about every time I tried to bend copper without a lever-style or spring bender.


__________________
Heros are made 10 gallons at a time.

Kegged/On Tap - Double IPA
Conditioning - Orange Ale
TommyBoy is offline
 
Reply With Quote
Old 03-13-2009, 02:15 AM   #3
RonRock
Always Ready
HBT_LIFETIMESUPPORTER.png
Feedback Score: 1 reviews
 
RonRock's Avatar
Recipes 
 
Join Date: Jul 2008
Location: Underwood, Iowa
Posts: 1,324
Liked 8 Times on 8 Posts
Likes Given: 3

Default

I'd suggest a 90* elbow and sweat fitting the bends. You can get a torch and solider at any hardware or lumberyard and will get a much better finish product. After it is done you get a new tool that you will use more often than you ever thought.

If you step up to a torch with a "Trigger Start" it works great to light the Grill or the Burner for your HBrew.
RonRock is offline
 
Reply With Quote
Old 03-13-2009, 01:11 PM   #4
rj_hockey
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2007
Location: Toledo, OH
Posts: 81
Default

Thanks for the suggestions i'm probably going to break down and pick up a spring bender. I'm not to sure about the elbow trying to have as few joints as possible since there will be hot sugar water running though the line, just think it you start to cake up over time, specially with my plumbing skills.
__________________
Primary: Pumpkin Pie
Secondary: Woods Pail Cider
Secondary: 50/50
On Tap: Woods Pale Ale, Double Citrus IPA, Blitzen Ale
rj_hockey is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
HERMS HEX coil Drake371 Other 9 12-23-2013 03:06 AM
HERMS Coil Placement EuBrew Brew Stands 4 08-31-2009 06:08 PM
HERMS HEX coil? Gumbys_Brew Brew Stands 9 02-27-2009 10:18 PM
HERMS Coil... Stevorino Equipment/Sanitation 21 01-30-2009 10:22 PM
HERMS Coil 3/8 vs. 1/2" BrewSapiens Equipment/Sanitation 10 04-07-2008 06:51 AM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS