Sweet Deal!!! - Home Brew Forums
Home Brew Forums > Home Brewing Beer > DIY Projects > Kettles, Mash Tuns & Hot Liquor Tanks > Sweet Deal!!!

Reply
 
Thread Tools
Old 03-12-2009, 04:37 PM   #1
macabra11
Recipes 
 
Feb 2009
Boise, ID
Posts: 317
Liked 1 Times on 1 Posts



Hey guys, I am totally stoked because I just picked up a 10 gal Igloo cooler that was used once for water - and it was only $15!!!!! Now I need to scour these forums to see what I need to put on my hardware store shopping list!
Wish me luck on getting all the right parts put together on the first try!


__________________
- macabra11
B - double E - double R - U - N

 
Reply With Quote
Old 03-12-2009, 04:39 PM   #2
Homercidal
Licensed Sensual Massage Therapist.
HBT_MODERATOR.png
 
Homercidal's Avatar
Recipes 
 
Feb 2008
Reed City, MI
Posts: 30,320
Liked 4665 Times on 3142 Posts


Good Luck!



 
Reply With Quote
Old 03-12-2009, 04:52 PM   #3
bad coffee
HBT_LIFETIMESUPPORTER.png
 
bad coffee's Avatar
Recipes 
 
Jun 2008
NYC
Posts: 5,103
Liked 477 Times on 466 Posts


check for bobbyM's picture. Helped me out quite a bit when I went shopping.

B
__________________
Quote:
Originally Posted by GilaMinumBeer
Why do you think they choose that path? (.)(.) = $$$$$$$$$
Quote:
Originally Posted by Zuljin View Post
Wtf was chasing you for an hour? Buy a gun already.
Quote:
Originally Posted by AZ_IPA View Post
I'm a meat hunter. PKU.

 
Reply With Quote
Old 03-12-2009, 05:25 PM   #4
chumprock
Recipes 
 
Dec 2008
Rochester, NY
Posts: 1,035
Liked 35 Times on 24 Posts


http://www.homebrewtalk.com/f51/chea...version-23008/

I had a heck of a time finding the SS washer, even Fastenal told me they dont carry them anymore.

 
Reply With Quote
Old 03-12-2009, 05:27 PM   #5
Cape Brewing
DOH!!! Stupid brewing...
HBT_LIFETIMESUPPORTER.png
 
Cape Brewing's Avatar
Recipes 
 
May 2008
Norton, MA
Posts: 13,078
Liked 773 Times on 613 Posts


Quote:
Originally Posted by chumprock View Post
http://www.homebrewtalk.com/f51/chea...version-23008/

I had a heck of a time finding the SS washer, even Fastenal told me they dont carry them anymore.

On the SS washers...

McMaster-Carr

it may not be the cheapest one you'll find but McMaster has EVERYTHING... ALL THE TIME.
__________________
Why the eff not... everyone else is starting a nano!!! I wanna!!! www.bogironbrewing.com

Quote:
Originally Posted by paulthenurse View Post
I'm pretty much a douche in real life, too.

 
Reply With Quote
Old 03-13-2009, 02:17 PM   #6
macabra11
Recipes 
 
Feb 2009
Boise, ID
Posts: 317
Liked 1 Times on 1 Posts


Well I went to HD last night and got most of what I needed. They didn't have everything though. I went home and the 3/8" components I got were way too small for the hole in the cooler. The hole is 7/8" diameter, so I will return what I got and try to get parts that size. You were right about the SS fender washers... the guys at HD looked at me like I had lobsters crawling out of my ears when I asked for them.

I doubt I will be able to find 7/8" ID SS fender washers, so is there ANYTHING else I would be able to use? I want to try this thing out this weekend.
__________________
- macabra11
B - double E - double R - U - N

 
Reply With Quote
Old 03-13-2009, 02:21 PM   #7
jmp138
Recipes 
 
Dec 2008
Pittsboro, NC
Posts: 328
Liked 5 Times on 5 Posts


I almost lost my mind looking for the SS washers, I hate to order little stuff like that off the internet. i finally found a washer that would work at the LHBS. I was talking to one of the guys about my problem and he said oh I've got one. If it comes down to it, you can buy a smaller sized stainless fender and drill it out, but let me tell you, that is a serious pain!

 
Reply With Quote
Old 03-13-2009, 02:43 PM   #8
macabra11
Recipes 
 
Feb 2009
Boise, ID
Posts: 317
Liked 1 Times on 1 Posts


Quote:
Originally Posted by jmp138 View Post
I almost lost my mind looking for the SS washers, I hate to order little stuff like that off the internet. i finally found a washer that would work at the LHBS. I was talking to one of the guys about my problem and he said oh I've got one. If it comes down to it, you can buy a smaller sized stainless fender and drill it out, but let me tell you, that is a serious pain!
Yeah I KNOW it is a pain. I had to modify one of those little bas***ds once for a piece on my truck bed cover latch. I think I went through 2 dremel discs on that half-day of a project.
__________________
- macabra11
B - double E - double R - U - N

 
Reply With Quote
Old 03-13-2009, 03:53 PM   #9
springer
 
springer's Avatar
Recipes 
 
Feb 2008
Wappingers falls NY
Posts: 4,743
Liked 24 Times on 22 Posts


I found a 4 pack of SS washers at Lowes . They have them in drawers of specialty Items. I did have to use a bastard file to enlarge the hole a tiny bit but they worked fine.
__________________
'The taxpayer: That's someone who works for the federal government but doesn't have to take the civil service examination.'- Ronald Reagan

 
Reply With Quote
Old 03-13-2009, 04:53 PM   #10
macabra11
Recipes 
 
Feb 2009
Boise, ID
Posts: 317
Liked 1 Times on 1 Posts


Quote:
Originally Posted by springer View Post
I found a 4 pack of SS washers at Lowes . They have them in drawers of specialty Items. I did have to use a bastard file to enlarge the hole a tiny bit but they worked fine.
What size were the washers springer? Was there a part # on the package?


__________________
- macabra11
B - double E - double R - U - N

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Those of you with labels, this is a sweet deal! Dude Label Display & Discussion 25 10-30-2008 12:45 AM
My Sweet Deal of the Month vfinch Bottling/Kegging 10 06-19-2008 03:00 PM
For those who crush their own - Sweet Deal at Lowes EdWort All Grain & Partial Mash Brewing 24 06-09-2008 06:50 PM
Heads up MD/DC/VA! Sweet CL deal. DraconianHand Equipment/Sanitation 1 07-30-2007 02:02 PM


Forum Jump