New HLT - complete - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > DIY Projects > Kettles, Mash Tuns & Hot Liquor Tanks > New HLT - complete

Reply
 
Thread Tools
Old 03-09-2009, 01:24 PM   #1
TommyBoy
 
TommyBoy's Avatar
Recipes 
 
Jul 2008
Greenville, South Carolina
Posts: 524
Liked 2 Times on 2 Posts



Just finished up on my HLT on Sat.



I am about 90% finished with the new rig and it's about time! I brewed a partial grain late last year on the frame when I only had 1 of me new kettles and I vowed to not brew again until the rig was finished because it was such a pain in the butt not having all the gear needed. I now just need about a half dozen clovers with 1/2" barbs and then a PID/asco/related equipment for HERMS.


 
Reply With Quote
Old 03-09-2009, 01:56 PM   #2
Sumo
 
Sumo's Avatar
Recipes 
 
Jul 2008
Cambridge, MA USA
Posts: 246
Liked 2 Times on 2 Posts


Your rig looks beautiful! Can you tell us a little more about it? Have you brewed on it yet and do you have temp control on the HLT or plan to add it?
__________________
"I'm all in favor of keeping dangerous weapons out of the hands of fools. Let's start with typewriters." - Frank Lloyd Wright (1868-1959)

 
Reply With Quote
Old 03-09-2009, 02:04 PM   #3
XXguy
 
XXguy's Avatar
Recipes 
 
Dec 2008
Southeastern PA
Posts: 1,118
Liked 16 Times on 15 Posts


That's a great looking rig. Looks like some good craftsmanship with a solid design & excellent vinyl signage!

 
Reply With Quote
Old 03-09-2009, 02:06 PM   #4
kornbread
Recipes 
 
May 2008
Mayodan, NC
Posts: 389
Liked 5 Times on 4 Posts


Your rig looks very cool. Question: Why do you have a stir motor on your HLT? It may be very common. But I haven't noticed that before.

 
Reply With Quote
Old 03-09-2009, 02:43 PM   #5
bendavanza
 
bendavanza's Avatar
Recipes 
 
Aug 2008
Oak CLiff, TX
Posts: 2,218
Liked 19 Times on 17 Posts


Nice looking setup. I see an advantage of the wide pots over kegs, they take less vertical space! My 3 tier is up in the air.

 
Reply With Quote
Old 03-09-2009, 02:47 PM   #6
The Pol
Recipes 
 
Feb 2007
Posts: 11,454
Liked 97 Times on 82 Posts


Quote:
Originally Posted by kornbread View Post
Your rig looks very cool. Question: Why do you have a stir motor on your HLT? It may be very common. But I haven't noticed that before.
It is a HERMS, so he has the stirrer to keep the water temp homogenous for better control. Heat is applied at the bottom, the coil removes heat and he loses heat through the sides of the kettle... a stirrer will keep the temps homogenous.

 
Reply With Quote
Old 03-09-2009, 02:55 PM   #7
TommyBoy
 
TommyBoy's Avatar
Recipes 
 
Jul 2008
Greenville, South Carolina
Posts: 524
Liked 2 Times on 2 Posts


Quote:
Originally Posted by Sumo View Post
Your rig looks beautiful! Can you tell us a little more about it? Have you brewed on it yet and do you have temp control on the HLT or plan to add it?
I brewed once as a partial grain but it was a pain without everything I needed so I am waiting until it is fully functional as a 10gal all grain unit. This weekend I will have my clover barbs and will give it a dry run to make sure that there are no issues. I will start brewing again in a couple weeks without a temp control but I will be adding this asap.

The frame is my first welding experience. Pretty fun. I have 3 15gal B3 kettles; HLT has 50' of 1/2" copper, 150rpm gear motor, 3" SS prop, and SS hardware with disconnects. The Mash has a copper ring for HERMS and a SS arm for sparging also on quick disconnects. (I really like the SS arm so I kept it and the copper ring.) I replaced the dip tubes in the HLT and Mash with homemade ones so I could draw a little more out of each kettle.

I recently received a pro pump and pro chiller and have a pro o2 unit on it's way. I might go with a disposable o2 tank for now.

 
Reply With Quote
Old 03-09-2009, 02:56 PM   #8
TommyBoy
 
TommyBoy's Avatar
Recipes 
 
Jul 2008
Greenville, South Carolina
Posts: 524
Liked 2 Times on 2 Posts


Quote:
Originally Posted by kornbread View Post
Your rig looks very cool. Question: Why do you have a stir motor on your HLT? It may be very common. But I haven't noticed that before.
To get an accurate temp/prevent temp stratification of the h2o during HERMS.

 
Reply With Quote
Old 03-09-2009, 03:06 PM   #9
llazy_llama
 
llazy_llama's Avatar
Recipes 
 
Jan 2009
Rapid City, South Dakota
Posts: 2,839
Liked 90 Times on 28 Posts


Very professional looking setup. Most of the rigs around here look like they came from somebody's garage (which they did, so there's nothing wrong with that) but this one seriously looks like it came custom built from a factory.

Very sharp, man.
__________________
Quote:
Originally Posted by Catt22 View Post
I would never use a dead mouse in my beer. It's much better to use live ones. You could probably just steep a dead one, but live ones must be mashed. Actually, smashed and mashed would be best.

 
Reply With Quote
Old 03-09-2009, 03:50 PM   #10
TommyBoy
 
TommyBoy's Avatar
Recipes 
 
Jul 2008
Greenville, South Carolina
Posts: 524
Liked 2 Times on 2 Posts


Quote:
Originally Posted by llazy_llama View Post
Very professional looking setup. Most of the rigs around here look like they came from somebody's garage (which they did, so there's nothing wrong with that) but this one seriously looks like it came custom built from a factory.

Very sharp, man.
Thanks. It was modeled after the B3 sculpture.

It was really fun welding it together as it was my first attempt at the art. I had so much fun that I wish I had a brew buddy that lived near and wanted one so I could build another.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
First AG Complete!!!! Big "A" All Grain & Partial Mash Brewing 7 04-29-2008 01:43 PM
The Complete Joy...... Alabama Brewer Beginners Beer Brewing Forum 14 01-25-2008 12:17 PM
First AG complete el gato All Grain & Partial Mash Brewing 3 01-20-2008 07:21 PM
complete beginner andrewdevlin86 General Techniques 3 10-08-2007 05:09 PM
1st AG complete niker0101 All Grain & Partial Mash Brewing 3 03-15-2007 10:32 PM


Forum Jump