10" Banjo Burner - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > 10" Banjo Burner

Reply
 
Thread Tools
Old 03-07-2009, 06:23 PM   #1
Dwain
 
Dwain's Avatar
Recipes 
 
Feb 2009
Hill Country, TX
Posts: 1,135
Liked 5 Times on 5 Posts



O.K.,
I bought 2 of the BG-14 burners with 30psi adjustable regulators. I am using bottled propane. I mounted one of them in the single tier system I'm building. I have read all of the burner threads I can find and still have a couple of questions:
1) How far from the top of the burner to the bottom of the keggle?
2) How tall is the blue flame supposed to be?
I tried several combinations after dark and the most efficient (longest and bluest) flame is pretty low, maybe 1 1/2" tall. The regulator is turned down pretty low and the air plate is closed off quite a bit. The burner, hose, and connections are clean.
3) Is this normal
Thanks for the help - Dwain

 
Reply With Quote
Old 03-08-2009, 07:20 AM   #2
thooper41
Recipes 
 
Jul 2007
Posts: 55

I have 3 banjos on my brutus, 2 are the new style one is the old style. While testing it I found 4.5in from tips to surface that the keg sits on to be the best distance. as for the regulator you are going to want to turn it up pretty high (20-30psi) and open up the air flow near wide open. The nice little blue cones will group into one big one at the center. I cant get the flame 100% blue but I can get it pretty close with just a little bit of yellow on the outside. Hope this helps.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
10" Banjo Burner Dwain Equipment/Sanitation 5 07-20-2011 04:04 AM
banjo burner POLISHALE Brew Stands 15 04-13-2009 02:51 AM
Banjo Burner size? IPAman Equipment/Sanitation 2 03-04-2009 03:12 PM
Banjo burner Coastarine Equipment/Sanitation 6 10-20-2008 06:37 AM
Banjo Burner Big "A" Equipment/Sanitation 13 04-02-2008 02:03 PM


Forum Jump