HELP: Rubber stopper doesn't appear to be airtight! - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > HELP: Rubber stopper doesn't appear to be airtight!

Reply
 
Thread Tools
Old 03-06-2009, 02:49 AM   #1
nibiyabi
Recipes 
 
Feb 2009
Santa Clara University
Posts: 170


I just conjured up a batch of EdWort's Apfelwein, but the extra rubber stopper I bought from MoreBeer doesn't fit in the carboy -- in fact, none of the extras I bought fit! Only the two (one open, one closed) that came with my beginner's kit fit snugly. The extras I bought don't have a "rim" on the top which prevents them from being pushed into the primary, and therefore I can only push them in partway, and it's just sitting on top. I could literally flick it right off. I realized this fifteen minutes after MoreBeer closed so I couldn't call them (tried anyway, reached VM). What on earth should I do to prevent this batch from getting ruined?
__________________
Primary #1: empty
Primary #2: Old Greg's Honey Stout (brewed 2009.03.20)
Secondary #1: Old Greg's Apfelwein (modified) (made 2009.03.20)
Secondary #2: Old Greg's Apfelwein (made 2009.03.05)
Keg #1: Old Greg's American IPA (brewed 2009.02.20 // secondaried 2009.02.28 // kegged 2009.03.07 // tapped 2009.03.30)
Keg #2: Old Greg's Chocolate Hazelnut Porter (brewed 2009.03.06 // kegged 2009.03.30)

RIP: Old Greg's Classic Beer Pong Ale (2009.02.27 - 2009.03.06)

 
Reply With Quote
Old 03-06-2009, 02:51 AM   #2

The bung needn't be airtight. This is a clear case of RDWHAHB.

 
Reply With Quote
Old 03-06-2009, 02:52 AM   #3
nibiyabi
Recipes 
 
Feb 2009
Santa Clara University
Posts: 170

Whew, thanks.
__________________
Primary #1: empty
Primary #2: Old Greg's Honey Stout (brewed 2009.03.20)
Secondary #1: Old Greg's Apfelwein (modified) (made 2009.03.20)
Secondary #2: Old Greg's Apfelwein (made 2009.03.05)
Keg #1: Old Greg's American IPA (brewed 2009.02.20 // secondaried 2009.02.28 // kegged 2009.03.07 // tapped 2009.03.30)
Keg #2: Old Greg's Chocolate Hazelnut Porter (brewed 2009.03.06 // kegged 2009.03.30)

RIP: Old Greg's Classic Beer Pong Ale (2009.02.27 - 2009.03.06)

 
Reply With Quote
Old 03-06-2009, 02:53 AM   #4

If it sets your mind at ease, cover the bung and airlock with a sanitized plastic baggie.

 
Reply With Quote
Old 03-06-2009, 02:53 AM   #5
PatMac
Recipes 
 
Feb 2009
Denton, TX
Posts: 164

Run to Home Depot or Lowes and get some tubing that will snugly fit in the top of the carboy and then run the other end of the tube to a jar of water to create a air lock. Use that until you can get a replacement stopper that fits. I think that would work...

 
Reply With Quote
Old 03-06-2009, 02:55 AM   #6
PatMac
Recipes 
 
Feb 2009
Denton, TX
Posts: 164

okay listen to flyangler, my solution is far to complicated :-)

 
Reply With Quote
Old 03-06-2009, 02:55 AM   #7
llazy_llama
 
llazy_llama's Avatar
Recipes 
 
Jan 2009
Rapid City, South Dakota
Posts: 2,839
Liked 90 Times on 28 Posts


Quote:
Originally Posted by PatMac View Post
Run to Home Depot or Lowes and get some tubing that will snugly fit in the top of the carboy and then run the other end of the tube to a jar of water to create a air lock. Use that until you can get a replacement stopper that fits. I think that would work...
More effort than it's worth. If the bung/stopper doesn't seal super tight, it doesn't matter. Hell, if you want to, you can remove that stopper and airlock altogether and just sanitize some tinfoil and use that.

Apfelwein doesn't have krausen, so blow off isn't a concern.
__________________
Quote:
Originally Posted by Catt22 View Post
I would never use a dead mouse in my beer. It's much better to use live ones. You could probably just steep a dead one, but live ones must be mashed. Actually, smashed and mashed would be best.

 
Reply With Quote
Old 03-06-2009, 02:58 AM   #8
Pogo
Recipes 
 
Jun 2008
Posts: 344
Liked 1 Times on 1 Posts


True...it's not too critical the first week or so.

But, you can wrap the stopper with plastic tape until you get a snug fit if you desire.

That should work until you can get the proper stopper.

Pogo


 
Reply With Quote
Old 03-06-2009, 03:00 AM   #9
popeiam
USBDT
HBT_LIFETIMESUPPORTER.png
 
popeiam's Avatar
Recipes 
 
Jan 2008
Whidbey Island WA.
Posts: 146

If you just started your fermentation I don't think it is such a big deal I've heard some people who ferment with out any thing such as a stopper. You could just let it go until you have a chance to get another stopper (quickly as possible/ next day) or if really worried about it you could use tinfoil over the top of the bottle for a day maybe two.

The bad stuff getting in comes from the top kind of falls down. Many people use tinfoil over the neck on of thier starters.
__________________
????

 
Reply With Quote
Old 03-06-2009, 03:03 AM   #10
dontman
 
dontman's Avatar
Recipes 
 
Oct 2008
Philly, PA
Posts: 2,402
Liked 27 Times on 22 Posts


Quote:
Originally Posted by PatMac View Post
okay listen to flyangler, my solution is far to complicated :-)
lol! I was thinking that but wasn't going to say it. Especially since this is for Apfelwein which won't blow off.
__________________
On Tap: 1. Kelly R. IPA, 2. Roter Hund Hefeweizen, 3. Bud Killer Blonde, 4. Red Dog Pale, 5. Roter Hund Oktoberfest, 6. Pumpkin Ale, 7. McRed's Stout (with new nitro system and stout tap,) Cream Soda, 8. ESB # 3, & 9. Ordinary Bitter.


 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
rubber stopper or strainer BrewKepf Beginners Beer Brewing Forum 2 03-08-2009 02:48 AM
rubber stopper slipping out eroth Beginners Beer Brewing Forum 15 02-22-2009 06:18 PM
Rubber Stopper Size... jdd120 Equipment/Sanitation 7 11-06-2007 04:38 AM
Rubber Stopper cubbies Equipment/Sanitation 9 04-17-2007 02:18 AM


Forum Jump