regulator troubleshooting - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Bottling/Kegging > regulator troubleshooting
Cool Brewing Giveaway - Supporting Membership Drive & Discount

Reply
 
Thread Tools
Old 03-04-2009, 12:11 AM   #1
maxbing
Recipes 
 
Nov 2008
Posts: 83
Liked 2 Times on 2 Posts



When I turn off the tank should the high pressure gauge drop down to 0 over time. This happens even when the shut off valves on all of my manifold outputs are closed.

I can't find any leaks and the low pressure gauge never moves

thanks



 
Reply With Quote
Old 03-04-2009, 01:01 AM   #2
sonetlumiere85
Recipes 
 
Jan 2008
Posts: 389
Liked 5 Times on 5 Posts


the high pressure gauge depletes when there's no Co2 coming out of the tank and any "free" pressure in your lines/keg is gone, in my experience.



 
Reply With Quote
Old 03-04-2009, 10:38 PM   #3
wallacebw
Recipes 
 
Feb 2009
Jacksonville, FL
Posts: 16

Quote:
Originally Posted by sonetlumiere85 View Post
the high pressure gauge depletes when there's no Co2 coming out of the tank and any "free" pressure in your lines/keg is gone, in my experience.
I have a new 2keg system and I was pressure testing it this week after replacing all the seals and prior to actually using it. I was shutting off the tank valve and ensuring that the regulator pressure didn't change as a test. The post reg pressure is stable at ~11psi after 24 hours; however over the course of ~30 min the hi pressure gauge was at zero. I assume this is due to the extremely low volume of High pressure gas that is trapped between the tank shutoff and the regulator coupled with things as simple as temperature fluctuations as the refrigerator cycles on and off, barometric pressure, and the gremlin that feeds my paranoia as a first time keg owner/user. Does that sound about right.

in essence, don't worry about it, have a beer and relax?

thanks,
Brian

 
Reply With Quote
Old 03-05-2009, 03:41 AM   #4
-Dan-
Recipes 
 
Jun 2007
Florida
Posts: 480
Liked 1 Times on 1 Posts


Have you tried to give the set up a dive in a large water jug? I had a leak I couldn't find until I submerged the tank plus regulator in a large water bucket
__________________
KulturgŁter Hopfen und Malz, Gott erhalt's!

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Regulator Troubleshooting KB12 Equipment/Sanitation 5 11-02-2009 07:39 PM
Troubleshooting my Wit secinarot All Grain & Partial Mash Brewing 1 06-09-2009 06:36 PM
Troubleshooting at an IPA mongrell General Techniques 13 06-11-2008 08:35 PM
troubleshooting mandoman General Techniques 1 03-05-2008 05:03 PM
Dry Hop Troubleshooting Orpheus General Techniques 5 09-03-2006 06:00 PM


Forum Jump