Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > What size O-ring do I need for Thermothingy
Reply
 
Thread Tools
Old 02-26-2009, 07:02 PM   #1
wedge421
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
wedge421's Avatar
Recipes 
 
Join Date: Jan 2008
Location: Harrisburg, PA
Posts: 958
Liked 12 Times on 11 Posts
Likes Given: 2

Default What size O-ring do I need for Thermothingy

What size o-rings do i need for the o-orings that go insoie the bolt that locks down the thermometer? The blacks ones not the red one.


wedge421 is offline
 
Reply With Quote
Old 02-26-2009, 07:10 PM   #2
GilaMinumBeer
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
GilaMinumBeer's Avatar
Recipes 
 
Join Date: Jan 2008
Posts: 51,480
Liked 5687 Times on 4981 Posts
Likes Given: 76

Default

Walmart carries a set of O-rings for faucet repairs. It's a mixed package. I dunno what the actual size is but, there are some small ones in there that work perfect.

Also, Radio Shack has some mini grommets that work good too.
GilaMinumBeer is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Botched thermothingy install kmudrick Kettles, Mash Tuns, & Hot Liquor Tanks 14 05-12-2009 05:05 PM
Thermothingy Rant!!! Kayos Equipment/Sanitation 9 04-21-2009 03:35 AM
Hole size in sparge ring or a mesh in the lauter tun? LaC - Brew Kettles, Mash Tuns, & Hot Liquor Tanks 7 07-29-2008 07:56 PM
Kewler Kitz Thermothingy... greg75 Equipment/Sanitation 5 01-07-2007 07:45 PM
Kewler Kitz Thermothingy... greg75 All Grain & Partial Mash Brewing 2 01-07-2007 04:18 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS