Can I put Perlicks on my tower? - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Can I put Perlicks on my tower?

Thread Tools
Old 02-26-2009, 01:51 PM   #1
Sep 2008
Colorado Springs
Posts: 173
Liked 3 Times on 3 Posts

I recently broke two handles because of the standard faucets that are sticking. I keep a bottle of sanitizer solution to rinse out the faucets after each use hoping it would reduce the sticking but after the second handle broke I decided it was time for seal forward faucets.

I bought a two faucet tower a long time ago. It's your typical stainless tower with stainless lines inside. I don't recall where I purchased it or what the brand is. Will Perlick faucets, or any other seal forward that might exist, fit without any troubles on my tower? Are they truly fit, form and function compatible with the other cheaper rear seal style faucet?


Reply With Quote
Old 02-26-2009, 02:11 PM   #2
Bernie Brewer
Grouchy Old Fart
Bernie Brewer's Avatar
Feb 2006
Eldorado, WI
Posts: 7,507
Liked 148 Times on 59 Posts

Should fit no problem. Mine did.
I like to squeeze the nickle until the buffalo craps-mt rob

"Why don't we get drunk and screw?" Jimmy Buffett

Reply With Quote
Old 02-26-2009, 04:21 PM   #3
slykwilli's Avatar
Sep 2008
Des Moines, Iowa
Posts: 147
Liked 3 Times on 3 Posts

I am pretty sure it is a standard thing - should go right on where your old faucet came off.

Reply With Quote
Old 02-26-2009, 04:41 PM   #4
MikeG's Avatar
Mar 2008
Atlanta, GA
Posts: 997
Liked 8 Times on 7 Posts

Yes, I've replaced one of mine after breaking, waiting to empty the keg before replacing the second.

Without the special wrenches you'll need to be careful and not scratch the finish with regular channel locks/pliers. The shaft with the small holes needs to come loose and your broken faucet will thread off, thread the new perlick on.

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Converting a Single Tower to a Dual Tower?!? nunzio42 Kegerators & Keezers 5 09-12-2013 05:43 AM
Perlicks worth it?? GroosBrewz Bottling/Kegging 17 08-10-2009 08:07 PM
Leaky Perlicks? rudy0498 Bottling/Kegging 1 01-31-2009 05:07 PM
Perlicks PeteOz77 Equipment/Sanitation 10 06-25-2008 09:22 PM
Problem with perlicks? Go Gators Equipment/Sanitation 4 04-24-2008 05:16 PM

Forum Jump