My horrible, yet functional, brew sculpture - Home Brew Forums
Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > My horrible, yet functional, brew sculpture

Reply
 
Thread Tools
Old 02-23-2009, 03:43 PM   #1
pompeiisneaks
Why that human mask?
HBT_LIFETIMESUPPORTER.png
 
pompeiisneaks's Avatar
Recipes 
 
Jan 2009
Redmond, WA
Posts: 853
Liked 52 Times on 29 Posts



I bought me some 1x1x1/4" angle iron and a welder, and decided to see if I could pull it off... I did so, albeit horribly. It holds all my weight though, and I weigh 230 lbs, so thats looking pretty positive. All the images are in the gallery, so I'll be linking from there, but take a look:





I think its 3 images per post, so I'll put up another few in an update


__________________
~Phil
Fermenting/Kegged/Bottled NONE :( I moved to the NW and haven't had time to setup my brew rig since! (but hey, I'm in the Pacific NW so there's so much awesome beer I don't need to brew it as much hah!

 
Reply With Quote
Old 02-23-2009, 03:44 PM   #2
pompeiisneaks
Why that human mask?
HBT_LIFETIMESUPPORTER.png
 
pompeiisneaks's Avatar
Recipes 
 
Jan 2009
Redmond, WA
Posts: 853
Liked 52 Times on 29 Posts


Here's some more:



There that should give you all a few laughs


__________________
~Phil
Fermenting/Kegged/Bottled NONE :( I moved to the NW and haven't had time to setup my brew rig since! (but hey, I'm in the Pacific NW so there's so much awesome beer I don't need to brew it as much hah!

Reason: added image links

 
Reply With Quote
Old 02-23-2009, 03:55 PM   #3
slykwilli
Recipes 
 
Sep 2008
Des Moines, Iowa
Posts: 147
Liked 3 Times on 3 Posts


I don't know anyone that started off as an expert welder but luckily practice makes perfect!

 
Reply With Quote
Old 02-23-2009, 03:56 PM   #4
s3n8
Recipes 
 
Jan 2008
Haymarket VA
Posts: 1,172
Liked 3 Times on 3 Posts


Wow, did a bird poop on your brewstand or is this your first time welding?

Seriously, thats better than I could have done. I suck at welding. Good on you for DIY.

 
Reply With Quote
Old 02-23-2009, 03:57 PM   #5
IrregularPulse
Hobby Collector
HBT_LIFETIMESUPPORTER.png
 
IrregularPulse's Avatar
Recipes 
 
Nov 2007
Posts: 50,218
Liked 3332 Times on 3198 Posts


Did you use the hammer at all to chip away at those welds? I'm no welder and have only laid down a handfull of beads myself, but I wouldn't trust those.
Is the whole thing level/straight?

It is still better than my non-existent one though. A+ for effort
__________________
Tap Room Hobo

I should have stuck to four fingers in Vegas. :o - marubozo's mom

 
Reply With Quote
Old 02-23-2009, 04:04 PM   #6
pompeiisneaks
Why that human mask?
HBT_LIFETIMESUPPORTER.png
 
pompeiisneaks's Avatar
Recipes 
 
Jan 2009
Redmond, WA
Posts: 853
Liked 52 Times on 29 Posts


I've got the chicken head hammer and have been hitting them... A few broke away, and I had to retry its "mostly level/straight" It looks to me like even though there's a slight irregularity to it, its very strong/stable. I banged around on all the welds... I need to clean it up still. I'll take the angle grinder to it tonite to clean up a bit. I also still need to weld on the keg support areas on top, but want my kegs to arrive (should all get here this week) before I size them. That way I know how big to make their platforms... Just big enough for them to overlap a bit...

Thanks for the comments... Yes its my "first welding" since high school, which was over 20 yrs ago :P. I vaguely remember how it all worked, and by the time I was almost done, I was finally getting some good beads out of it.

The other good thing, is that now, I have a welder, and can fix it if it doesn't work well
__________________
~Phil
Fermenting/Kegged/Bottled NONE :( I moved to the NW and haven't had time to setup my brew rig since! (but hey, I'm in the Pacific NW so there's so much awesome beer I don't need to brew it as much hah!

 
Reply With Quote
Old 02-23-2009, 04:19 PM   #7
keelanfish
Recipes 
 
Aug 2008
Decatur, GA
Posts: 317
Liked 5 Times on 3 Posts


I had a structural engineering professor that was fond of saying, "even a sh#!y weld will take the design load...once" I remember as a kid the basketball goal's rim at the end of the street broke one time. Of course one of the nice neighborhood dad's had a welder and came down with his ladder to fix it. And fix it he did, until after a few hundred times being impacted and vibrated by shots and of course it broke the first time we played. After several more attempts at fixing it, he eventually replaced the rim with a new one.

I'm not an expert, but from the photos you posted it doesn't look like you've actually bonded the metal. It also doesn't look like you preped the weld sites very well either. My guess is that with repeated loading you are going to start seeing joints come undone. I'd be careful. You get an A for effort though. I'm not trying to be harsh, but I don't want you to end up many gallons of boiling wort being dumped on you crotch level. And God forbid if you have any kids around.

Next time be sure to clean the weld areas thoroughly to remove any possible oils and oxides. You can do this by sanding the area down to pristine bare metal. Also, you need to preheat the weld area to ensure proper bonding. The strength of a weld is from the two individual pieces bonding together, not from using the weld stick as glue.

Also, with using such small angles you're not going to get very much moment resistence at the individual joints. Racking forces are probably the weaklink of this structure. You could vastly improve on that by adding a few cross braces to take the moment loads off of the joints.

Here's a link about basic welding practices: http://www.wikihow.com/Arc-Weld

Reason: Added useful link

 
Reply With Quote
Old 02-23-2009, 04:25 PM   #8
wildwest450
Registered User
Recipes 
 
Dec 2007
Posts: 9,043
Liked 173 Times on 158 Posts


I think your brewery name should be "Scalded to Death Brewing".
Good luck with it though.

 
Reply With Quote
Old 02-23-2009, 04:30 PM   #9
Revvy
Post Hoc Ergo Propter Hoc
HBT_LIFETIMESUPPORTER.png
 
Revvy's Avatar
Recipes 
 
Dec 2007
"Detroitish" Michigan
Posts: 40,921
Liked 3180 Times on 1881 Posts


I think it ranks high up in the ugly junk category!!!

I could just see Biermuncher's keggle sitting on top of that thing...
__________________
Like my snazzy new avatar? Get Sons of Zymurgy swag, here, and brew with the best.

Revvy's one of the cool reverends. He has a Harley and a t-shirt that says on the back "If you can read this, the bitch was Raptured. - Madman

I gotta tell ya, just between us girls, that Revvy is HOT. Very tall, gorgeous grey hair and a terrific smile. He's very good looking in person, with a charismatic personality... he drives like a ****ing maniac! - YooperBrew

 
Reply With Quote
Old 02-23-2009, 04:35 PM   #10
wildwest450
Registered User
Recipes 
 
Dec 2007
Posts: 9,043
Liked 173 Times on 158 Posts


Quote:
Originally Posted by Revvy View Post
I could just see Biermuncher's keggle sitting on top of that thing...

Only until you filled it with water.



 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
My new brew sculpture Lil' Sparky All Grain & Partial Mash Brewing 28 04-04-2016 07:26 PM
First all grain brew (with amazing brew sculpture pic) alpo All Grain & Partial Mash Brewing 15 02-14-2016 03:32 AM
brew sculpture? beerme Equipment/Sanitation 10 09-18-2013 02:40 AM
Why does my brew taste horrible? Griffsta All Grain & Partial Mash Brewing 9 08-22-2009 09:33 PM
Brew Sculpture Wade E Brew Stands 3 06-24-2009 11:27 PM


Forum Jump