Secondary Vs. Bottle Conditioning - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Secondary Vs. Bottle Conditioning

Reply
 
Thread Tools
Old 02-15-2009, 01:36 AM   #1
rrj713
Recipes 
 
Feb 2009
Posts: 5


Ok, this is my first post on these forums so go easy on me. I'm currently on my first batch and so i'm trying to keep things as simple as possible for myself as I get familiar with the brewing process. I'm trying to figure out when to bottle and if racking into a secondary is necessary or not. The guy at my local homebrew store insists that I need to rack into a secondary (he didn't even ask what type of beer I was brewing or how long it's been in my primary).

I've read in these forums that a secondary is not needed, and John Palmer's book also says it's not needed. So I didn't find this guy very helpful and I need my questions answered. It's been in the primary for 2 weeks now, should i listen to him and rack into a secondary for another week or 2, or should I just go ahead and bottle next weekend? and if I just bottle next weekend, how do I do the Priming without a bottling bucket?

If it helps answer my question... It's an English Pale Ale
OG 1.050
instructions say final gravity will be between 1.012-1.014

Thanks for advance for your help!



 
Reply With Quote
Old 02-15-2009, 01:44 AM   #2
Nurmey
I love making Beer
HBT_LIFETIMESUPPORTER.png
 
Nurmey's Avatar
Recipes 
 
Jul 2007
Omaha, NE
Posts: 3,983
Liked 30 Times on 26 Posts


Welcome to HBT!

There is no need to rack to secondary. As you read, many folks don't use a secondary. We were not kidding about it, it just isn't needed. I will tell you that you should leave your beer for another week or two. This will allow the yeast to complete it's job cleaning up your beer as well as giving it some bulk aging time.

I don't know what to tell you about not having a bottling bucket. Obviously, you can rack it to whatever you were going to use as a secondary and bottle from that, however, I have never tried to bottle out of anything other than a bottling bucket.


__________________
Batch 1 Brewing
The American Revolution would never have happened with gun control.

 
Reply With Quote
Old 02-15-2009, 01:47 AM   #3
woollybugger2
Recipes 
 
Feb 2009
Posts: 534
Liked 3 Times on 3 Posts


Take a SG reading, when you get the same results to days in a row it's time to bottle...

Secondary isn't necessary, I did a triple on my first brew and racked it into the secondary, then bottled it after taking SG readings....

 
Reply With Quote
Old 02-15-2009, 01:49 AM   #4
mmb
Jazz Hands!
HBT_LIFETIMESUPPORTER.png
 
mmb's Avatar
Recipes 
 
Feb 2008
WBMI
Posts: 30,100
Liked 4016 Times on 3768 Posts


There is really no "wrong" answer and no "right" answer for your question. Everyone approaches this issue differently. You're going to end up getting a lot of personal processes and nothing definitive.


Unless I'm bulk aging a big beer, making a fruit beer, dry hopping, oaking or something else that needs to sit for some time I just primary for 2 - 4 weeks and then keg/bottle.

Bottle conditioning and secondary isn't the same, however. Bottle conditioning is adding a little sugar to naturally carbonate. Secondary isn't when you carb.
__________________
Black Phantom Brewing Company

 
Reply With Quote
Old 02-15-2009, 01:55 AM   #5
Neomich
Recipes 
 
Sep 2007
Fort Worth (soon)
Posts: 461

I'm no expert and still consider myself a n00b at this but here is my $0.02......

If you want it to condition, leave it in primary. The yeast will clean up some of their own by products if you leave it sit. If you take it to a secondary, you'll be losing a large percentage of your yeast for clean up. I've done batches both ways but only after letting it stay in primary for a few weeks. My only reasons for a secondary are for clarity and freeing up my primary for another beer.

I'm not sure about priming the batch without a bottling bucket. It sounds as if you do have another (secondary) vessel. I suppose you could transfer the beer into the second, clean and sanitize your primary bucket and use it to bottle. Or, you may be able to bottle from the secondary using your siphon, tubing and hopefully bottling wand. I've never tried this, my kit came with a bottling bucket and I've always used it.

One thing I'm learning about this is that beer is pretty forgiving. I've gone off traveling for months and left beer and I've also done a 20-day turn around on a batch. Don't stess too much and just have some patience. The beer will be fine.
__________________
"You can't be a real country unless you have a beer and an airline - it helps if you have some kind of a football team, or some nuclear weapons, but at the very least you need a beer."

-Frank Zappa

 
Reply With Quote
Old 02-15-2009, 02:03 AM   #6
beersydoesit
Recipes 
 
Nov 2008
Madison, Wi
Posts: 330
Liked 6 Times on 4 Posts


I don't own a bucket. I always bottle from a carboy. It is simple enough. Add the boiled and cooled priming sugar, rack the beer on to it and bottle. Works easy.

My personal practice is to use a secondary. Probably as much out of habit as anything else.

I agree it isn't essential, but I'm used to it.

Regards
__________________
Dave in Madison

 
Reply With Quote
Old 02-15-2009, 02:15 AM   #7
rrj713
Recipes 
 
Feb 2009
Posts: 5

Thanks for the fast replies everyone. One more quick question that's been on my mind. If i do decide to rack to my 5-gallon carboy either to bottle from there or to leave it there as a secondary, I am just supposed to open my current bucket and stick the siphon in? I'm guessing the air that gets in at that point is negligable, but I wanted to ask just to be sure. Thanks again.

 
Reply With Quote
Old 02-15-2009, 02:17 AM   #8
mmb
Jazz Hands!
HBT_LIFETIMESUPPORTER.png
 
mmb's Avatar
Recipes 
 
Feb 2008
WBMI
Posts: 30,100
Liked 4016 Times on 3768 Posts


Yup, just siphon and go. Don't splash too much and you'll be fine.

I'd really recommend a bottling bucket. It helps quite a bit and the bottling wand makes it so much easier than bottling from a racking tube.
__________________
Black Phantom Brewing Company

 
Reply With Quote
Old 02-15-2009, 02:29 AM   #9
beersydoesit
Recipes 
 
Nov 2008
Madison, Wi
Posts: 330
Liked 6 Times on 4 Posts


I stick my wand on the end of racking tube.
(sounds dirty)

What is difference between a racking tube and whatever attaches to a bucket?
__________________
Dave in Madison

 
Reply With Quote
Old 02-15-2009, 02:31 AM   #10
Stef1966
Recipes 
 
Nov 2008
Quebec, Canada
Posts: 390
Liked 4 Times on 4 Posts


Well im no expert but i can see at least two good reasons to use a secondary:

1- see this other guy in this other thread who just busted a glass carboy to pieces trying to scrub all the dirty mess the initial Krausen left.

(i use a plastic primary fermenter plastic bucket for at least the first 10 days and you can see my thread about the plastic bag covering method, after that initial "wild yeast feast stage" you just transfer and blow offs wont occur and it wont get as dirty in your carboy).

2- transferring to secondary (a glass carboy in my case) after about 10 days, begins to clear the beer out and is a first step towards the final product, no blow offs or insanely dirty carboy to clean up afterwards, just a beer that keeps on aging with what's left of the active yeast cells for as long as you wish (i usually let them sit in secondary for 2 weeks then bottle).

Hey it's beer, do you want to wait till your retirement days to be able to finally taste it? I dont, im not that patient.

Just my little .02 cents worth of worthless advices, hey i've only been brewing for 2 years now, so what do I know?


__________________
As long as there is some Beer left, there is Hope.


 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Difference between bottle/keg-conditioning and secondary fermentation? bernerbrau Bottling/Kegging 9 07-14-2009 09:24 PM
Bottle Conditioning/Secondary Fermentation OGreuelRules General Beer Discussion 5 11-13-2008 10:18 PM
secondary vs. bottle conditioning yusky2 Beginners Beer Brewing Forum 2 10-17-2008 10:01 AM
Aging - Secondary/Bottle Conditioning illin8 General Beer Discussion 3 04-28-2008 03:44 PM
Temperature for Secondary / Bottle Conditioning vtchuck Beginners Beer Brewing Forum 2 06-18-2007 06:10 AM


Forum Jump