Stout Tap + Beer Gas, too much foam - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Stout Tap + Beer Gas, too much foam

Reply
 
Thread Tools
Old 02-14-2009, 11:45 PM   #1
Moonshae
 
Moonshae's Avatar
Recipes 
 
Jan 2008
Helmetta, NJ
Posts: 416
Liked 9 Times on 5 Posts



I have my pressure on the beer gas set to 25 PSI, 10' of 3/16" ID tubing to the tap. After the cascading stops, I still have half a glass of head. Do I need to lower my pressure, increase my line length, or what?
__________________
"You never can tell with bees." --Winnie the Pooh

 
Reply With Quote
Old 02-14-2009, 11:49 PM   #2
Coastarine
We get it, you hate BMC.
HBT_LIFETIMESUPPORTER.png
 
Coastarine's Avatar
Recipes 
 
Apr 2008
New Bern, NC
Posts: 2,516
Liked 25 Times on 22 Posts


Did you carbonate the keg with pure co2 before you put it on the beergas? If it is overcarb'd I think that will lead to too much foam. I put the keg on CO2 for a day or two to get it slightly overcarb'd then disconnect it and vent it a few times a day. I find that the beer at 40F will have a pretty nice carbonation level at 0psi. Then it is ready for the beergas.
__________________
SEMPER FIDELIS ET SEMPER PARATUS Bringin' the 'pane...the propane.Coming Up:..[Hefewiezen][BCS Robust Porter][EdWort's Haus Pale Ale][Peated Ale]
Fermenting:.
Conditioning:[Oaked Cider][ESB]
On Tap.........[The Munchner][Spiced Cider][English Cider][Simcoe IPA][Triple Hops Grooved][Cider'n 'gnac]

 
Reply With Quote
Old 02-14-2009, 11:54 PM   #3
Moonshae
 
Moonshae's Avatar
Recipes 
 
Jan 2008
Helmetta, NJ
Posts: 416
Liked 9 Times on 5 Posts


I did carb with pure CO2 first, just slightly less than I usually carb my beers. I'll have to disconnect the beer gas and start venting; I hooked it up right away.

Everything else in my system seems good, though? Hose diameter and length, beer gas PSI?
__________________
"You never can tell with bees." --Winnie the Pooh

 
Reply With Quote
Old 02-15-2009, 12:13 AM   #4
Coastarine
We get it, you hate BMC.
HBT_LIFETIMESUPPORTER.png
 
Coastarine's Avatar
Recipes 
 
Apr 2008
New Bern, NC
Posts: 2,516
Liked 25 Times on 22 Posts


With beergas the hose length and diameter really aren't a big deal, you don't want a pressure drop through the line the way you do with CO2 pushed beer. You want the pressure drop to be across the restrictor plate. The only reason for the gas is to supply that pressure and maintain carbonation, so you don't have to be as picky about the pressure, you can just set the pressure so that it comes out of the faucet at an appropriate rate.
__________________
SEMPER FIDELIS ET SEMPER PARATUS Bringin' the 'pane...the propane.Coming Up:..[Hefewiezen][BCS Robust Porter][EdWort's Haus Pale Ale][Peated Ale]
Fermenting:.
Conditioning:[Oaked Cider][ESB]
On Tap.........[The Munchner][Spiced Cider][English Cider][Simcoe IPA][Triple Hops Grooved][Cider'n 'gnac]

 
Reply With Quote
Old 02-15-2009, 12:21 AM   #5
Moonshae
 
Moonshae's Avatar
Recipes 
 
Jan 2008
Helmetta, NJ
Posts: 416
Liked 9 Times on 5 Posts


Good to know, I had no idea. I might reduce the length, then, because it seems like I get a bit of foam from the tubing first, until the beer fresh from the keg gets to the tap.
__________________
"You never can tell with bees." --Winnie the Pooh

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
My first glass of beer from my kegged batch... all foam. The second? all foam. 3rd? nerdlogic Bottling/Kegging 24 11-15-2012 03:14 PM
Foam on top of the beer Stunna980 General Beer Discussion 6 06-19-2009 02:55 PM
co2 in foam but not beer? mandoman Bottling/Kegging 29 09-29-2008 12:28 PM
Beer Foam simzy General Beer Discussion 3 01-04-2007 01:29 PM
All Foam no beer at 10 PSI Matt Bottling/Kegging 2 12-25-2006 10:30 PM


Forum Jump