Faucets/Sparge Arm/Various Odds and Ends

I am trying to clean up some of my past brewing equipment, so I'm listing it here:

4 used, but cleaned, economy faucets $13 each. One is missing the back O-ring, I'll let that go for $10.

1 never used sparge arm $20 (similar to this: http://www.midwestsupplies.com/rigid-copper-sparge-arm.html but not a closed circle)

1 full set of QDs $50. Will include everything in this picture: 4 female 90 degree barbed QDs, 9 Male MPT QDs

1 lot of garden hose disconnects. I have 3 female and 1 male $10

1 Set of loose connectors. I have no idea why I have these, but $15 for the lot

1 Right hand threaded high pressure gauge. Never used $8.

1 Blichmann auto sparge kit (never used by me, received with something I purchased here) $30 (http://www.midwestsupplies.com/auto-sparge-kit.html)

I can ship all of these in flat rate boxes (except for the sparge arm)

Entire album can be found here: http://imgur.com/a/GTSFv

Please post here, don't PM me. I will contact you by PM for Paypal/shipping.

Thanks

Edit: Noticed the URL on the regulator was wrong. I removed it, because I can't find it on Midwest. It's a 0-3000 PSI right hand thread.

Interested in auto sparge. What would shipping look like to 60607?

antiteam said:

Interested in auto sparge. What would shipping look like to 60607?

Click to expand...

I don't think that would quite fit in the small flat rate box because of the diameter of the ball. The next bigger size is 11.35

Pash91 said:

I don't think that would quite fit in the small flat rate box because of the diameter of the ball. The next bigger size is 11.35

Click to expand...

Actually, scratch that, I believe I can ship it for ~$7 using my own box.

Do you happen to have the tube/float as well?

antiteam said:

Do you happen to have the tube/float as well?

Click to expand...

Unfortunately this is how it came to me. I can give you a little bit of 3/8 silicone tubing with it, you'll just have to add a drilled stopper (I think that's how they float it)

Think I'm gonna have to pass. Too much other stuff that I need before an autosparge. Good luck with the sale!

Still no interest? I'd be willing to negotiate price if someone is genuinely interested

would you be willing to do $15 shipped for the sparge arm?

mors said:

would you be willing to do $15 shipped for the sparge arm?

Click to expand...

I'd do 15 before shipping. It's not going to fit nicely into a flat rate box, so I don't want that 15 to be used up by shipping.

I understand, but it's just not for me. I was going to make one of a slightly different design but figured if I could get this pre made one cheaply I could compromise. Thanks.

That's fine, good luck with your design

I'll Take the auto Sparge for $10+ shipping with the 3/8 silicon tubing. Just pm me how you would like payment.

90minman said:

I'll Take the auto Sparge for $10+ shipping with the 3/8 silicon tubing. Just pm me how you would like payment.

Click to expand...

Sorry, I'd like to clean out this stuff, but I'm not that desperate. It's worth $50, and I certainly think it's worth more than 10

Sorry I meant $15 + shipping I saw on the post above that's what you wanted. Didn't mean to low ball you. Sorry.

You're talking about the circular arm or the Blichmann one? The 15+ shipping was for the copper circular one.

Sorry misread didn't pay attention to the users names. Thought it was still the blichmann auto sparge.

PM Sent

I'm interested in the Blichmann Auto Sparge kit and the pressure guage. How much to ship them to 03447?

babski said:

I'm interested in the Blichmann Auto Sparge kit and the pressure guage. How much to ship them to 03447?

Click to expand...

Autosparge is gone. Gauge + shipping would be 13

PM Sent for autosparge
I'll take the guage too.