How do I connect this burner to propane?
- Thread starter bhamade
- Start date
Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:
Nateo
Well-Known Member
You need a hose, regulator, and a nozzle fitting that screws into the burner. My burner looks a lot like that, but I couldn't swear they're exactly the same. I have a 30psi regulator.
Here's a link to the hose and regulator I have. Don't have a link for the nozzle that screws into the burner.
http://www.amazon.com/gp/product/B0043DHJKY/?tag=skimlinks_replacement-20
Here's a link to the hose and regulator I have. Don't have a link for the nozzle that screws into the burner.
http://www.amazon.com/gp/product/B0043DHJKY/?tag=skimlinks_replacement-20
Last edited by a moderator:
You will need this http://www.agrisupply.com/orifice-f-asc%2364494-/p/72051/cn/5400001/ Gas orifice fitting, and this hose http://www.agrisupply.com/lp-gas-hose-assembly-/p/36108/cn/5400001/ and a regulator like this http://www.agrisupply.com/high-pressure-adjustable-regulator-valve/p/64484/cn/5400001/. If you want to go low pressure then there are different parts needed to make the burner work correctly.
chapusin
Well-Known Member
Buying all that stuff separately doesn't make sense, if you buy it altogether it's the same price:
http://www.agrisupply.com/banjo-burner-gas-cooker-btu-kab/p/64482/
Now, if you want to make it low pressure, I'm guessing this is what you need:
The orifice: http://www.agrisupply.com/orifice-for-asc/p/72051/
Regulator and hose: http://www.agrisupply.com/low-pressure-regulator-handwheel-pol-and-hose/p/36107/
A little cheaper than the high pressure application. You might need more components, don't know for sure as I'm a noob at this, just trying to figure it out so I can buy it as well.
Cheers!
http://www.agrisupply.com/banjo-burner-gas-cooker-btu-kab/p/64482/
Now, if you want to make it low pressure, I'm guessing this is what you need:
The orifice: http://www.agrisupply.com/orifice-for-asc/p/72051/
Regulator and hose: http://www.agrisupply.com/low-pressure-regulator-handwheel-pol-and-hose/p/36107/
A little cheaper than the high pressure application. You might need more components, don't know for sure as I'm a noob at this, just trying to figure it out so I can buy it as well.
Cheers!
Similar threads
