user 78027
Well-Known Member
- Joined
- Apr 15, 2011
- Messages
- 274
- Reaction score
- 13
I am building my Brew Rig and I am one part short of being able to light it up.
I have Bayou Classic BG14 Cast Iron Banjo Burners and I need to convert the 3/8 flare on the burner to an elbow so the hose can connect without have to turn 180 degrees. With the hose connecting it sticks out of the rig about 2 inches and could hit something and break. If I can go off the burner at 90 degrees it is all contained with in the side of the rig and all is well.
Has anyone solved this problem.
I have Bayou Classic BG14 Cast Iron Banjo Burners and I need to convert the 3/8 flare on the burner to an elbow so the hose can connect without have to turn 180 degrees. With the hose connecting it sticks out of the rig about 2 inches and could hit something and break. If I can go off the burner at 90 degrees it is all contained with in the side of the rig and all is well.
Has anyone solved this problem.