Alarm during autotune?

Broham1 · Apr 10, 2013

I've got my Auber 2352 setup and am "brewing" water for the initial test. I'll do a better write up after this weekend's brew. First, a question:

If I set my Al1 to 170, as well as my SV, will the alarm go off during autotune, or are alarms disabled during autotune?

Broham1 · Apr 10, 2013

Cuz I've got nothing happening with my Auber buzzer.

Broham1 · Apr 11, 2013

Just looking for the simple answer on this one before I go and rip open my box.

Help?

jeffmeh · Apr 11, 2013

If you have not already done so, exit autotune mode and test your alarm?

Broham1 · Apr 11, 2013

See, there's the simple answer I was looking for!

I'll try that after work.

BadNewsBrewery · Apr 12, 2013

Logic dictates that one of two things is happening. 1 - The alarm doesn't activate during autotune. 2 - you've got an issue with your circuit / buzzer. If you don't want to tear apart the panel, then do as jeffmeh suggests and try eliminating the autotune function. You can just set your alarm value to below whatever ambient temperature is in your kettle - you don't even need to fill it up with water.

Broham1 · Apr 12, 2013

Yeah, logic . . .

Apparently I called in sick the day that was handed out

Thanks, guys. I'll do some troubleshooting tonight.

Alarm during autotune?

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

Broham1

Well-Known Member

Broham1

Well-Known Member

Broham1

Well-Known Member

jeffmeh

Well-Known Member

Broham1

Well-Known Member

BadNewsBrewery

Well-Known Member

Broham1

Well-Known Member

Similar threads

Latest posts

Alarm during autotune?

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!