Anthony_Lopez
Well-Known Member
I know there are quite a few threads on stir plates, however it seems people have a lot of questions when it comes to the wiring. I could probably turn out the schematic in 15 minutes if there is actually a desire for one. I train most of the technicians in my department for electrical set ups, so i have no issues making things as clear as possible...
I'd appreciate any feed back.
FYI- it cost about 15 dollars for the parts from radio shack, and my power supply, fan, and magnet was free.
I'd appreciate any feed back.
FYI- it cost about 15 dollars for the parts from radio shack, and my power supply, fan, and magnet was free.