aekdbbop
Well-Known Member
Ok, i know before i replaced my orings, my keg sealed fine. but when i just tried to pressurize one, it is leaking from the large oring, and the pressure release valve... anyone know what could be up?
Leaky Cornie Seal...
- Thread starter aekdbbop
- Start date
Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:
Brewtopia
"Greenwood Aged Beer"
I've gotten the pressure relief valve cross threaded before where it didn't seat properly. Back it out and make sure that's not the case. If it's screwed in correctly, try some keg lube on both this and the lid O-ring and see if that fixes the problem.
OP
OP
aekdbbop
Well-Known Member
yeah... i latherd the oring with lube and it fixed it.. nice thanks...
